2024EAP RES Colocação tirantes
Summary
TLDRThe script outlines the proper use of a long or rigid board for immobilizing victims suspected of cervical or lumbar spine injuries. It emphasizes the importance of using five yellow straps and one red or differently colored strap for securing upper body parts. The process involves correctly positioning and adjusting straps, ensuring minimal movement during transportation, and securing a lateral head immobilizer for safe pre-hospital care.
Takeaways
- 🏥 A rigid board or long board is used to restrain victims suspected of having spinal injuries in the cervical or lumbar region.
- 🔍 It is recommended to have five yellow straps and one red or differently colored strap for distinguishing the upper limb restraint.
- 📏 The first step is to place two crossed straps at the height of the trunk on the long board, ensuring correct positioning.
- 🔗 Adjust the excess length of the straps in a zigzag pattern to avoid interference during the operation.
- 🔄 After the initial straps, the remaining ones should be passed under the rigid board in a transverse manner.
- 🔍 It's crucial to condition the excess straps in a zigzag pattern as demonstrated in the video.
- 🔐 Firefighters should use smaller straps to reduce the displacement amplitude of the equipment during vehicle movement.
- 🔴 After placing the five straps, the firefighter must place the red strap for fixing the upper limbs, as shown in the video.
- ➡️ The male end of the red strap should be adjusted from right to left as viewed from the board, allowing for adjustments during vehicle movement.
- 🔨 After securing the straps, the firefighter should place the base of the lateral head immobilizer to ensure it is well installed.
- 🛠️ Finally, the firefighter should place the remaining equipment, ensuring the equipment is ready for pre-hospital care.
Q & A
What is the purpose of using a long board or rigid board?
-A long board or rigid board is used for immobilizing victims in cases where there is a suspicion of injury to the cervical or lumbar spine, which can result in damage to the vertebral column.
How many straps are suggested to be used for setting up the board?
-It is suggested to use five yellow straps and one red or differently colored strap to differentiate the one that will be used for immobilizing the upper limbs.
What is the correct position for the straps on the long board?
-The straps should be placed crosswise on the long board at the height of the torso, ensuring proper positioning.
How should the excess of the straps be adjusted?
-The excess of the straps should be adjusted in a zigzag pattern to avoid interference during the operation.
What is the importance of using smaller pass-throughs for the straps?
-Using smaller pass-throughs helps to reduce the amplitude of displacement of the equipment during the movement of the vehicle and transportation.
Which strap is used for immobilizing the upper limbs and how should it be adjusted?
-The red strap is used for immobilizing the upper limbs, and it should be adjusted from right to left as viewed from the board.
What is the purpose of adjusting the male buckle of the strap from right to left?
-This adjustment allows the firefighter to make new adjustments when necessary during the movement of the vehicle.
What is the next step after placing the five straps?
-After placing the five straps, the firefighter should place the red strap for the fixation of the upper limbs.
What is the importance of placing the base of the lateral head immobilizer?
-It is important to fix all the straps with the aim of keeping the base well installed.
What should be done after fixing the base of the lateral head immobilizer?
-After fixing the base, the firefighter should place the remaining equipment, ensuring that the equipment is ready for pre-hospital care.
What is the final step in preparing the equipment for use in pre-hospital care?
-The final step is to ensure that all the equipment is in place and ready for use in pre-hospital care.
Outlines
🚑 Proper Use of Long Board for Spine Injuries
This paragraph discusses the correct use of a long board, also known as a rigid board, for victims suspected of having spinal injuries in the cervical or lumbar region. The importance of using five yellow straps and one red or differently colored strap for distinguishing the upper limb restraint is emphasized. The steps include placing two crossed straps at the trunk height, adjusting the excess straps in a zigzag pattern to prevent interference during operation, and passing the other straps under the board in a transverse manner. Additionally, firefighters are advised to pass straps through smaller loops to reduce the amplitude of equipment displacement during vehicle movement and transport. After placing the five straps, the firefighter must place the red strap for fixing the upper limbs, ensuring the male end of the strap is adjusted from right to left as viewed from the board. This allows for adjustments during vehicle movement. Finally, the lateral head immobilizer base is placed, and all straps are secured to ensure proper installation. The paragraph concludes with the equipment being ready for pre-hospital care.
Mindmap
Keywords
💡Spine board
💡Spinal injury
💡Straps
💡Crossed straps
💡Zigzag adjustment
💡Smaller straps
💡Red strap
💡Head immobilizer
💡Pre-hospital care
💡Transport
💡Adjustment
Highlights
Prancha longa ou prancha rígida is a device used for restraining victims in cases of suspected cervical or lumbar spine injury.
It is suggested to have five yellow straps and one red or differently colored strap for restraining upper limbs.
Follow specific steps to assemble the board, starting with placing two crossed straps at the trunk height.
Ensure the correct position of the straps and adjust the excess in a zigzag pattern to avoid interference during operation.
Place the remaining straps under the rigid board in a transversal manner.
It is important to condition the excess of the straps in a zigzag as shown in the video.
Firefighters should pass the straps through smaller buckles to reduce the amplitude of displacement during vehicle movement and transport.
After placing the five straps, the firefighter must place the red strap for the fixation of upper limbs.
Adjust the male buckle of the strap from right to left as viewed from the board.
This adjustment allows the firefighter to make new adjustments when necessary during vehicle transport.
After fixing the straps, the firefighter should place the base of the lateral head immobilizer.
Secure all straps to ensure the base is well installed.
After securing the base, the firefighter should place the remaining equipment.
The equipment is now ready for pre-hospital care use.
Transcripts
prancha longa ou prancha rígida é um
dispositivo usado para restrição de
vítimas em casos de suspeita de lesão na
coluna cervical ou dorso lombar que
podem resultar em danos à coluna
vertebral para montar a prancha a
sugestão é que tenhamos cinco tirantes
amarelos e um tirante vermelho ou outro
de outra cor que possa diferenciar
aquele que vai ser usado para restringir
os membros
superiores para agem da
prancha devemos seguir por sugestão as
seguintes etapas primeiro colocar dois
tirantes cruzados na prancha Longa na
altura do tronco devendo observar a
posição correta dos
feixes bomo ajustar a sobra dos tirantes
em ziguezague para que não atrapalhe
durante a operação com o
equipamento logo após os demais tirantes
devem ser passados por baixo da prancha
rígida Na
[Música]
transversal
[Música]
é importante também acondicionar as
sobras dos tirantes em ziguezague
conforme está sendo mostrado no
[Música]
vídeo outro cuidado os bombeiros devem
tomar é passar os tirantes nos
passadores menores para diminuir a
amplitude do deslocamento do equipamento
durante a movimentação da viatura e no
[Música]
transporte logo após colocar os cinco
tirantes o bombeiro deve colocar o
tirante vermelho que será usado para a
fixação dos membros superiores conforme
mostro o
vídeo
é importante também que o fecho macho do
tirante seja ajustado da direita para a
esquerda de quem olha pra prancha esse
cuidado vai possibilitar a bombeiro
fazer novos ajustes quando necessário
durante a movimentação da
[Música]
viatura após a fixação dos tirantes o
bombeiro deve colocar a base do
imobilizador lateral de cabeça é
importante fixar todos os tirantes com o
objetivo de manter a base bem
instalada logo após a fixação da base o
bombeiro deve colocar os demais
equipamentos Pronto seu equipamento está
em condições para o uso no atendimento
pré-hospitalar
5.0 / 5 (0 votes)