Cara Membuat Ecoprint Dye Blanket | How to make Ecoprint Dye Blanket | MORDANT TS2+ (01)

Summary

This tutorial showcases the process of making eco-print fabric using natural dye techniques. The video demonstrates how to prepare the fabric by washing and mordanting it, followed by dyeing it with a natural concoction made from guava leaves. The tutorial then guides viewers through the technique of creating eco-prints by arranging leaves on the fabric, wrapping it, and steaming it for two hours. The result is a beautifully dyed, eco-friendly fabric with intricate leaf patterns. The video offers clear, step-by-step instructions, making it easy for anyone to follow and replicate the process.

Takeaways

• 😀 Prepare natural fiber fabric, like rayon, that is soft and suitable for eco-printing.
• 😀 Clean the fabric by washing it thoroughly or boiling to open its fibers, ensuring maximum absorption during the dyeing process.
• 😀 Collect leaves of guava and jatropha for creating the natural dye, and crush them to facilitate the boiling process.
• 😀 Boil the leaves with water until the liquid becomes concentrated, then strain it to remove the leaf debris.
• 😀 Soak the fabric in the hot dye solution overnight to achieve deep and rich color absorption.
• 😀 Prepare a mordant solution using ingredients like soda ash, sodium acetate, and alum to pre-treat the fabric for better color bonding.
• 😀 Submerge the fabric in the mordant solution, stir it to ensure even saturation, and boil for 15-20 minutes for optimal absorption.
• 😀 After the mordanting process, let the fabric cool, rinse, and hang it to dry before proceeding to the next steps.
• 😀 For texturing, dissolve turmeric powder in the leftover mordant solution and soak the fabric for one hour to achieve a cream-colored tone.
• 😀 After texturing, rinse the fabric briefly, squeeze out excess water, and allow it to dry fully before moving on to the eco-printing stage.
• 😀 Lay the fabric flat, arrange leaves creatively, and wrap it tightly with a plastic sheet, securing it with tape or rope before steaming it for 2 hours to set the print.

Q & A

What is the main topic of the tutorial?

The tutorial demonstrates how to create eco-print fabric using modern techniques with natural dyes made from guava leaves.

What type of fabric is recommended for this eco-printing technique?

The tutorial recommends using natural fibers such as rayon, which has a soft texture, making it suitable for eco-printing.

Why is it necessary to clean the fabric before starting the eco-printing process?

Cleaning the fabric is important to remove impurities and to open up the fibers, ensuring that the fabric absorbs the dye effectively.

What is the purpose of boiling the leaves in water during the dyeing process?

Boiling the leaves helps to extract the natural pigments, creating a concentrated dye solution that can then be used to color the fabric.

How long should the fabric be soaked in the natural dye?

The fabric should be soaked in the natural dye overnight for a deep color or can be used immediately for a lighter shade.

What are the key ingredients used in the mordanting process?

The mordanting process uses ingredients such as alum, baking soda, sodium acetate, and water to prepare the fabric for dye absorption.

What is the significance of heating the mordant solution before applying it to the fabric?

Heating the mordant solution ensures better absorption of the mordant into the fabric fibers, helping the dye to bond effectively during the later stages.

Why should the fabric be steamed or boiled in the final step of the eco-printing process?

Steaming or boiling the fabric helps to set the prints and pigments, ensuring that the eco-printed design remains intact once the fabric has cooled down.

What is the purpose of using plastic and wrapping the fabric tightly during the eco-printing process?

Wrapping the fabric tightly in plastic helps to trap the natural dye and heat, ensuring the colors and prints are transferred effectively from the leaves to the fabric.

How can the eco-printed fabric be further enhanced after the steaming process?

After steaming, the fabric should be rinsed briefly in clean water and then dried completely to reveal the final eco-print design, which should have a cream-colored hue.