熱でもない、スプレーのりでもない、100均のアレで〇〇転写!熱転写ホログラムをジグに転写する簡単な方法
Summary
TLDR本视频介绍了一种无需热压或熨烫的全息图转印方法。使用的材料是不易拉伸的薄型全息图和环氧树脂胶粘剂,后者在制作诱饵时不可或缺且价格低廉。视频中演示了如何将全息图粘贴在聚苯乙烯板上,并通过夹具施加适当压力固化10分钟,然后再用聚乙烯板覆盖固化30分钟。尽管在转印过程中出现了一些环氧树脂溢出的问题,但最终效果令人满意。视频还推荐了一些购买全息图的网店,如'Lucky Fish',提供小批量低价的全息图。
Takeaways
- 🌟 视频中介绍了一种无需热压或熨烫的全息图转印方法。
- 📐 全息图材料是薄且不可拉伸的,适合热转印。
- 🚫 使用水溶性喷雾胶粘贴全息图会导致图像模糊。
- 🎨 油漆或涂层可能会使全息图流动,影响其效果。
- 🔧 环氧树脂胶是制作诱饵不可或缺的材料,且价格低廉。
- 👐 环氧树脂通过化学反应固化,即使不接触空气的部分也会硬化粘牢。
- 🛠️ 推荐使用双手涂抹环氧树脂,然后放置切割好的全息图。
- 🔄 如果是曲面,全息图可能会起皱,但目前的方法是可行的。
- 🔗 使用聚苯乙烯板夹住全息图,并用夹子或夹具固定,施加适度压力。
- ⏱️ 环氧树脂大约需要10分钟固化,之后检查固化情况。
- 🔄 转印后,全息图几乎不会留在释放膜上,效果非常好。
- 🔧 还尝试了将全息图转印到具有强烈曲率的诱饵背面和腹部。
- 🛠️ 使用耐水砂纸平整表面,并推荐使用老虎钳或夹具固定。
- 🎨 未涂漆的粗糙背面和腹部有些显眼,轻喷清漆后效果更佳。
- 🛒 视频推荐了一个名为“Lucky Fish”的网店,以低价出售多种全息图。
- 📲 视频最后鼓励观众订阅、评价,并欢迎提问和评论。
Q & A
视频中介绍的全息图转印方法需要使用热压或烫印吗?
-不需要。视频介绍了一种不需要热压或烫印的全息图转印方法。
视频中提到的全息图材料有什么特点?
-视频中提到的全息图材料是薄的、不可拉伸的。
为什么使用水溶性喷雾胶粘贴全息图会导致图像模糊?
-因为如果使用胶水粘贴,全息图可能会因为胶水的湿润性而变得模糊。
视频中提到的环氧树脂胶有什么作用?
-环氧树脂胶在视频中被用作粘合剂,用于将全息图牢固地粘贴在物体表面。
为什么使用干燥硬化型粘合剂(如喷雾胶)对全息图转印不利?
-因为如果全息图粘附在干燥硬化型粘合剂表面,它可能不会很好地干燥,而且即使干燥后也容易受湿度和温度的影响,从而影响全息图的光泽。
视频中提到环氧树脂胶如何固化?
-环氧树脂胶通过化学反应固化,即使不接触空气的表面也会硬化并粘附。
视频中如何使用环氧树脂胶来转印全息图?
-视频中展示了在物体表面涂抹一层薄薄的环氧树脂胶,然后用手将切割好的全息图放置上去,如果表面是曲面,可能会有皱纹,但暂时可以接受。
视频中提到的聚苯乙烯板在转印过程中起什么作用?
-聚苯乙烯板在转印过程中起到固定全息图的作用,通过夹子或夹具施加适度的压力,使全息图平整地贴合在物体表面。
视频中提到的全息图转印过程需要多长时间?
-视频中提到,环氧树脂胶在大约10分钟后会开始硬化,然后需要再次夹紧并放置大约30分钟。
视频中提到的'Lucky Fish'网店是做什么的?
-视频中提到的'Lucky Fish'网店是一个在网上销售全息图的商店,提供小批量且价格低廉的全息图。
视频作者如何推荐观众获取更多全息图资源?
-视频作者推荐观众通过'Lucky Fish'网店购买全息图,并提到在视频简介中有链接。
Outlines
😀 热转印全息图的准备与粘贴
本段介绍了一种无需热压或熨烫的全息图热转印方法。使用了一种非弹性的薄材料,并指出使用水溶性喷雾胶粘贴会导致全息图模糊,且可能因涂漆或涂层而流动。推荐使用环氧树脂胶,因为它通过化学反应固化,不接触空气的表面也会硬化,从而保持全息图的光泽。演示了使用环氧树脂胶将全息图粘贴在聚苯乙烯板上的过程,包括涂抹薄层环氧树脂、手工放置剪裁好的全息图,并用夹子或夹具固定约10分钟。
😉 全息图转印的进阶技巧
在第二段中,演示了如何将全息图转印到具有复杂曲面的模具上。首先,用聚乙烯板再次夹紧并等待30分钟,然后展示了转印效果,几乎没有任何全息图残留在释放膜上。接着,尝试将全息图转印到具有强烈圆度的模具背面和腹部,使用防水砂纸进行平整,并推荐使用老虎钳或夹具固定。最后,展示了转印到模具上的效果,指出如果不进行涂漆,粗糙的背面和腹部会稍微明显,并通过轻喷清漆进行了改善。
🎉 全息图转印的总结与推荐资源
最后一段总结了全息图转印的过程,并指出环氧树脂胶挤出导致侧面弄脏的问题,但作者相信下次可以做得更好。还提到了在具有强烈圆度的模具上进行转印的前提条件是涂漆。此外,介绍了一种在脸部附加贴纸型全息图的方法,并推荐了在雅虎拍卖上购买多种类型的转印全息图,以及一个名为“Lucky Fish”的网店,它以低价出售小批量的全息图。最后,鼓励观众订阅和评价视频,并欢迎提出问题和评论。
Mindmap
Keywords
💡全息图
💡热转印
💡环氧树脂
💡聚苯乙烯板
💡水溶性喷雾胶
💡化学固化
💡转印
💡水磨砂纸
💡漆
💡Yahoo拍卖
💡Lucky Fish
Highlights
无需热压或熨烫即可转移全息图
介绍用于热转移的全息图材料,是一种薄且不具弹性的材料
使用水溶性喷雾胶粘贴全息图可能会导致图像模糊
全息图可能因绘画或涂层而流动,喷雾胶不是好选择
展示了无需胶水粘贴全息图的方法
准备材料包括聚苯乙烯板和环氧树脂粘合剂
环氧树脂粘合剂是制作诱饵不可或缺的,价格便宜
通过实验发现,干燥硬化的粘合剂不适合粘贴全息图
环氧树脂通过化学反应固化,即使不接触空气的表面也会硬化并粘附
在表面上均匀涂抹薄层环氧树脂
将切割好的全息图放置在环氧树脂上
使用聚苯乙烯板夹住全息图并用夹子或夹具固定
等待大约10分钟后检查环氧树脂的固化情况
通过轻擦夹具边缘来方便剥离
再次用聚乙烯板夹住并等待大约30分钟
展示了全息图转移成功,几乎没有残留在释放膜上
尝试将全息图转移到具有背腹的诱饵上
使用废料和水磨砂纸进行水平处理
推荐使用台钳或夹具固定进行转移
展示了在具有强烈圆形的诱饵上转移全息图的效果
未涂漆时,粗糙的背部和腹部较为明显
展示了轻喷清漆后的全息图效果
介绍了在Yahoo拍卖上购买多种类型的转移全息图
推荐了一个名为“Lucky Fish”的网店,以低价出售小批量全息图
介绍了环氧树脂转移全息图的方法,并鼓励订阅和评价视频
Transcripts
Hello everyone.
Thank you for watching.
This time, I will transfer the hologram by a certain method.
No hot stamping or ironing heat is required.
This is a hologram for thermal transfer.
It is a thin, non-stretchable material.
There is also a method of pasting with a water-soluble spray glue, but
If you paste it with glue, the hologram will be blurred.
In addition, holograms may flow due to painting or coating.
Spray glue is not good.
Now, let's put that method into practice.
This is the first thing to prepare.
This color board,
It is a polystyrene plate.
And this is today's protagonist.
Epoxy adhesive.
It is indispensable for making lures.
It's very cheap.
The other day, I tried to transfer it with this,
I was able to paste it firmly, so
It's still a trial and error process,
I took a video because I wanted to tell you in a hurry.
Adhesives that dry and harden, such as spray glue, are not good.
If the hologram is stuck on the adhesive surface, it will not dry well.
In addition, it is easily affected by humidity and temperature even after drying.
The brilliance of the hologram is impaired.
Epoxy is cured by a chemical reaction, so
The surface that does not come into contact with the air will also harden and stick.
Spread a thin layer of epoxy on the surface.
It may be better to apply it with bare hands.
I usually do it with my bare hands.
Place the cut transfer hologram.
If it is a curved surface, it will wrinkle, but for now it is OK as it is.
Do the same for both sides.
In the second half of the video, we'll show you some recommended hologram web shops.
It seems easier to apply epoxy on both sides first.
The surface of the hologram is protected by a film, so it doesn't matter if the surface gets dirty.
This is where polystyrene boards come into play.
Sandwich with a board like this.
Press around with a clip or clamp.
The board will dent along the shape of the jig.
The styrene board holds down the hologram with moderate pressure.
Leave for about 10 minutes
Check the curing condition with the remaining epoxy.
It will harden in about 10 minutes.
Take it out once.
Rub the edge of the jig.
This is to make it easier to peel off.
Sandwich it again with a polyethylene plate.
Leave for about 30 minutes
It's a moment of tension.
I was able to transfer it very beautifully.
There are almost no holograms left on the release film.
Actually, there is one more thing I would like to try.
It is an experiment to see if it can be transferred to this back and abdomen.
Level with water resistant sandpaper.
Use the scraps.
Recommend using a vise or clamp for this task.
10 minutes later
Leave for 30 minutes or more
It's a moment of tension again.
It feels good.
Unfortunately, the epoxy squeezed out and soiled the sides.
I think I can do better next time.
I also tried it on a jig with a strong roundness.
I think it's good if it's a premise to paint.
Without painting, the rough back and belly are a little noticeable.
It was lightly sprayed with lacquer paint.
A sticker-type hologram is attached to the face.
Many transfer holograms are sold at Yahoo auctions.
There are more types than commercially available hologram stickers, so it's fun.
A web shop called "Lucky Fish" sells them in small lots at low prices.
I'm buying here.
There is a link in the summary section.
This time I introduced the epoxy transfer of holograms.
If you find this video useful, please subscribe and rate it.
Questions and comments are welcome.
Well then, until the day we meet again.
浏览更多相关视频
Lecture 3 - Merkle Trees
Mastering Excalidraw Templates: 4 Hands-on Techniques to Boost Your Productivity
How to use SafeAreaInsets in SwiftUI | Bootcamp #65
Making a basic graph in Office 365 Excel
Mastering Concept Visualizations: A Simple Workflow for Creating Effective Visuals
How To Generate Images With ChatGPT (Create AI Art with Chat GPT)
5.0 / 5 (0 votes)