BONDEK DAN WIREMESH! Pilihan Tepat Cor Plat Dak Lantai! Ternyata Simpel Cara Pasangnya!

Summary

In this informative video, the host discusses the construction and renovation of houses, focusing on the use of Bondek for concrete flooring. The video explains how to measure the thickness of the floor, the advantages of using Bondek over plywood, and the structural benefits it offers. Viewers learn about essential materials like M8 wire mesh and the proper installation techniques. The host addresses common misconceptions about Bondek and highlights its efficiency in minimizing concrete volume. The session also covers practical tips for ensuring proper elevation between different floor sections and preparing for columns in the upper floor. Overall, the video serves as a valuable resource for anyone interested in building or renovating their home.

Takeaways

• 😀 Bondek is essential for concrete pouring, serving both as a mold and a structural element.
• 😀 The recommended thickness for floor slabs in living areas is 12 cm, measured from the bottom of the Bondek.
• 😀 Unlike plywood, which is merely a mold, Bondek contributes to the structure's integrity.
• 😀 When using Bondek, the bottom layer of steel reinforcement can be effectively replaced, simplifying the construction process.
• 😀 A diameter of 8 mm for wire mesh is standard and can be used in conjunction with Bondek.
• 😀 Wire mesh spacing should ideally be 15 cm x 15 cm to maintain structural support.
• 😀 Bondek comes with locking clips that ensure secure stacking during installation.
• 😀 The design of Bondek minimizes concrete volume needed for pouring while maintaining strength.
• 😀 A concrete cover of 1.5 cm above the wire mesh is necessary to provide adequate protection.
• 😀 Proper elevation management is crucial, particularly when transitioning between main floors and bathroom areas.

Q & A

What is the standard thickness for a concrete floor slab when using Bondek?

The standard thickness for a concrete floor slab when using Bondek is 12 cm.

How is the thickness of the slab measured when using Bondek?

The thickness is measured from the lowest point of the Bondek, not from the top surface.

What is the recommended thickness for non-living areas of the house?

For areas that are not frequently used, a thickness of 10 cm can be sufficient.

What are the main differences between Bondek and plywood in construction?

Bondek serves as both a mold and a structural support, while plywood is used only as a mold.

What is the diameter of the wire mesh used in conjunction with Bondek?

The diameter of the wire mesh used with Bondek is 8 mm.

How does Bondek help in reducing concrete volume?

The design of Bondek minimizes the volume of concrete needed while maintaining structural integrity.

What should be ensured during the pouring of concrete over Bondek?

It is crucial to secure the Bondek properly to prevent displacement during the pouring process.

What is the minimum concrete cover required over the wire mesh?

A minimum of 1.5 cm of concrete should cover the wire mesh to ensure adequate support.

Why is it important to plan for columns in the construction process?

Planning for columns is important to ensure structural support and stability in the building.

How should differences in floor heights, such as in bathrooms, be managed?

Differences in floor heights should be addressed by considering the thickness of the flooring and the materials used in the bathroom area.