Buceo Buceador FEDAS CMAS B1E Capítulo 1
Summary
TLDRThe video script offers an in-depth guide on the initial contact with water for diving, emphasizing the importance of factors such as water temperature, diving suits, buoyancy, the weight belt, the hydrostatic jacket, underwater vision and hearing, and communication between divers. It explains the impact of water temperature on the body, the necessity of entering water gradually to avoid shock, and the role of a proper diving suit in heat retention and protection against marine irritants. The script also covers the types of diving suits (wet suit, semi-dry suit, and dry suit) and their appropriate use in varying water temperatures. It discusses buoyancy control using a weight belt and the hydrostatic jacket, and how to maintain neutral buoyancy at different depths. The effects of pressure changes on buoyancy during descent are highlighted, along with the use of a hydrostatic jacket as a life vest in emergencies. The guide also addresses the challenges of underwater vision due to reflection and refraction, the importance of wearing a diving mask, and the impact of water depth and light conditions on visibility. It touches on the differences in underwater hearing compared to air and the need for learning standard diving signals for effective non-verbal communication. The summary concludes with a reminder of the importance of these factors for a safe and enjoyable diving experience.
Takeaways
- 🌡️ The water temperature varies depending on the location and time of the year, which significantly impacts divers due to the body's thermal regulation response to cold water.
- 🏊♂️ Gradual entry into the water helps avoid cold shock and potential loss of consciousness, which can occur due to rapid temperature change.
- 🧊 The human body loses heat quickly in water due to its high thermal conductivity, which is 25 times greater than that of air.
- 👚 Wearing a properly fitted wetsuit is crucial for retaining body heat and protecting against abrasions and irritations from the aquatic environment.
- 🧤 There are three types of diving suits: wet, semi-dry, and dry suits, each suitable for different water temperatures and offering varying levels of insulation.
- 🧵 Neoprene, the material used in diving suits, acts as a barrier to slow down the transfer of body heat to the outside.
- 🎽 Gloves, fins, and especially hoods are important accessories to the diving suit, as the head is where the body loses heat the fastest.
- 🧗♂️ The principle of buoyancy (negative, neutral, or positive) is influenced by the balance between the upward push of the water and the downward pull of gravity.
- 📦 Weight belts are used to adjust buoyancy, with divers adding or removing lead weights to achieve neutral buoyancy.
- 🧵 The buoyancy control device (BCD) or 'Jacket' is used to manage buoyancy during the dive, with divers inflating or deflating it to control their depth.
- 👓 Underwater vision is affected by reflection and refraction, making objects appear larger and closer than they are, but a diving mask can significantly improve visual clarity.
- 🌌 Colors are absorbed at different rates as you descend, with reds and oranges disappearing first, followed by yellows, while blues and greens dominate at greater depths.
Q & A
What is the impact of water temperature on divers?
-Water temperature significantly affects divers as the human body's average temperature is around 37 degrees Celsius. When divers first enter the water, their thermoregulatory system has to quickly adapt to a drastic temperature change, which can lead to cold shock or even loss of consciousness if the water is cold. It's crucial to enter the water slowly and ensure proper rest the night before.
Why does the human body lose heat so quickly in water?
-The human body loses heat quickly in water because water is 25 times more effective at conducting heat than air. Even in warm water, divers can start to feel cold after being submerged for a while due to the rapid heat transfer from the water in contact with the skin.
What are the two main functions of a diving suit?
-The diving suit serves two key functions: first, to retain the body's heat and prevent heat loss when in contact with water; and second, to protect divers from irritations and cuts that can occur from contact with the aquatic environment, such as from animals, stinging plants, or rubbing against rocks or the sea floor.
What are the three types of diving suits and their respective uses?
-There are three types of diving suits: the wetsuit, which allows water entry and is primarily used in warm or temperate waters; the semi-dry suit, which is thicker and more insulating with a zipper for better water resistance, ideal for colder waters; and the dry suit, which is fully waterproof, prevents water entry, and includes a special system for inflating with air, suitable for very cold or contaminated waters.
How does the buoyancy principle affect a diver?
-Buoyancy, as described by Archimedes' principle, depends on the volume of the submerged object and the weight of the displaced fluid. When divers wear a neoprene suit, their volume increases, making them more buoyant. To balance this, divers use a weight belt to add weight and counteract the forces, allowing for better control and stability in the water.
Why is it important to adjust the volume of the buoyancy control device (BCD) during a dive?
-Adjusting the volume of the BCD is crucial for maintaining neutral buoyancy at different depths. As divers descend, pressure changes affect the volume of the BCD and the suit, altering the buoyancy. By inflating or deflating the BCD, divers can achieve neutral buoyancy, which allows for horizontal movement with minimal effort and reduced air consumption.
What are the components of a buoyancy control device (BCD)?
-A BCD typically consists of an air bladder for storing air, an oral inflation tube for controlling the entry and exit of air, one or more dump valves for quick deflation, and a securing system to the diving cylinder, which may include a shoulder strap or waist belt to firmly hold the cylinder.
How does underwater vision differ from vision on the surface?
-Underwater vision is affected by reflection and refraction, which significantly influence the perception of submerged objects. Wearing a diving mask helps by providing a layer of air between the mask and the face, resulting in clearer images. However, objects seen through the mask appear larger and closer than they actually are. Additionally, colors like red and orange disappear, and blues and greens become more dominant as divers descend.
How does sound travel underwater, and what are the challenges it presents?
-Sound travels underwater as expansions and compressions of a liquid, which is denser than air, allowing it to travel about 4.5 times faster than in the air. However, it can be difficult to locate the source of a sound underwater as it reaches both ears almost simultaneously, and the sound source seems closer than it actually is.
Why is it essential to learn hand signals for communication underwater?
-Since verbal communication is not possible underwater, hand signals are essential for divers to communicate effectively. They are quick, universal, and can convey essential information, warnings, or requests without the need for verbal exchange.
What should a diver do when ascending to the surface?
-When ascending, a diver should rotate and look around to be aware of their surroundings. Upon surfacing, they should first raise their hand to make themselves visible to others, such as people on a boat, to prevent accidents.
How should a diver properly put on their weight belt?
-To put on a weight belt, a diver should lay it out straight on the ground, squat down in front of it, grasp both ends with their hands, and stand up with the belt hanging behind their body. Then, while maintaining this position, they should fasten the belt. This method prevents the weight from pulling on the hands and makes it easier to secure the belt.
Outlines
🌡️ Water Temperature and Diving Gear
The first paragraph discusses the importance of water temperature in diving and its impact on divers' bodies. It mentions that water temperature is generally lower than the ambient temperature and can cause a sudden drop in body temperature, leading to a potential shock or loss of consciousness. The paragraph emphasizes the need for a gradual entry into the water and proper rest the night before. It also explains the role of a diving suit in maintaining body heat and protecting against irritations and injuries from marine life or rocks. There are three types of diving suits: wetsuit, semi-dry suit, and dry suit, each suitable for different water temperatures and offering varying levels of insulation and water resistance. Additionally, the paragraph touches on the use of gloves, fins, and hoods to retain heat and the importance of caring for the diving suit to ensure its longevity.
🧘♂️ Buoyancy, Weight, and Diving Techniques
The second paragraph focuses on buoyancy and weight management in diving. It explains the concepts of negative, neutral, and positive buoyancy, and how they are affected by the balance between the diver's weight and the upward push of the water, as described by Archimedes' principle. The diver must determine the right amount of weight, often in the form of lead weights, to achieve neutral buoyancy based on the type of suit, water salinity, and total equipment weight. The paragraph also describes the correct method of wearing the weight belt and the importance of removing it first when exiting the water to maintain buoyancy. Furthermore, it discusses the use of a buoyancy control device (BCD) or 'Jacket' to adjust buoyancy during the dive, and the need for a well-optimized and positioned weight system to ensure safe and efficient diving.
👀 Visibility and Communication Underwater
The third paragraph addresses the challenges and techniques related to underwater visibility and communication. It describes how underwater vision is affected by reflection and refraction, making objects appear larger and closer than they are. Using a diving mask can significantly improve visual clarity by trapping a layer of air between the mask and the face. The paragraph also notes that underwater colors can fade due to light absorption, with reds and oranges disappearing and blues and greens becoming more prominent at greater depths. A dive light can help restore color perception. Regarding communication, the paragraph explains that sound travels faster underwater but loses clarity due to the lack of reference points for localization. Therefore, divers must learn standard hand signals for underwater communication, which are quick, universal, and essential for clear and vital interactions, as well as for group coordination.
Mindmap
Keywords
💡Scuba diving
💡Water temperature
💡Wetsuit
💡Buoyancy
💡Hydrostatic vest (Buoyancy Control Device)
💡Underwater vision
💡Underwater hearing
💡Communication underwater
💡Weight belt
💡Flotabilidad neutra (Neutral buoyancy)
💡Safety considerations
Highlights
Abraham de Román, a diving instructor, explains the factors to consider for a first contact with water, such as water temperature, diving suit, buoyancy, and communication between divers.
Water temperature varies depending on the location and time of the year, and it's crucial to enter the water slowly to avoid shock or loss of consciousness due to sudden temperature change.
The human body loses heat rapidly in water due to its high thermal conductivity, which is 25 times greater than air.
A proper diving suit is essential to maintain body heat and protect against irritations and injuries from the aquatic environment.
There are three types of diving suits: wetsuit, semi-dry suit, and dry suit, each suitable for different water temperatures and conditions.
Gloves, fins, and especially the hood are important accessories to the diving suit, as the head is where the body loses heat the fastest.
To maintain optimal diving suit condition, it should be thoroughly rinsed, dried, and not folded for extended periods.
Buoyancy is affected by the balance between gravity and the upward push of the water, and it can be adjusted using a weight belt.
Each diver must determine the number of lead weights needed based on the type of suit, water type, and total equipment weight.
The buoyancy control device (BCD) or 'Jacket' has pockets for additional weights to distribute them evenly across the body.
Maintaining neutral buoyancy is challenging due to pressure changes during descent, which affect the volume of the BCD and suit.
Inflatable BCDs help divers achieve neutral buoyancy at any depth by adjusting the volume of air within the jacket.
Vision underwater is affected by reflection and refraction, making objects appear larger and closer than they are.
A diving mask creates an air pocket that improves underwater vision by reducing blurriness.
Underwater, colors are affected by a phenomenon called absorption, where reds and oranges disappear, and blues and greens become more dominant.
An underwater flashlight can help restore colors and is useful for exploring dark areas like caves.
Hearing underwater is different from in air due to the faster transmission of sound through water, which is denser than air.
Sound sources seem closer underwater, and it's challenging to locate them accurately due to the simultaneous arrival of sound to both ears.
When ascending, divers should rotate and look around to be aware of their surroundings and avoid collisions.
Standard hand signals are essential for clear and universal communication underwater, replacing verbal communication.
Transcripts
Hola qual over soy Abraham de Román
instructor de buceo fedas Y hoy vas a
aprender cómo puede ser un primer
contacto con el agua para ello tendremos
en cuenta factores como la temperatura
del agua el traje de buceo la
flotabilidad el lastrado el chaleco
hidrostático o Jacket la visión y
audición bajo el agua y por último la
comunicación entre buceadores vamos a
ello Por supuesto que la temperatura del
agua va a depender de dónde nos enc
entremos no es lo mismo bucear en el
Caribe que bucear en el Cantábrico y
también influye el momento del año en el
que estamos no es lo mismo invierno que
verano pero casi siempre la temperatura
del agua es inferior a la temperatura
ambiente por supuesto Esto va a tener un
impacto fuerte en nosotros como
buceadores ya que la temperatura media
del cuerpo son unos 37 gr el mayor
peligro recién nos sumergimos es que
nuestro sistema termorregulador tiene
que hacer frente en muy pocos segundos a
un cambio muy drástico de la temperatura
y este cambio tan repentino de la
temperatura puede dar lugar a una
hidrocución que no es más que la
reacción del cuerpo al entrar en
contacto con agua fría y nos puede
provocar un shock o incluso una pérdida
de conciencia por eso es muy importante
entrar al agua despacio y con buen
cuerpo y asegurándonos de haber
descansado bien la noche anterior mucho
mejor si nos mojamos las muñecas y la
nuca Y así vamos acostumbrando al cuerpo
al cambio de temperatura Y si en este
momento sentimos algún escalofrío es un
buen momento para dejar la inmersión
para otro día pero por qué pierde tan
rápidamente calor el cuerpo humano
cuando entramos en contacto con el agua
el agua es 25 veces más termoconductor
que el aire por eso Incluso en aguas cál
cuando llevamos un ratito sumergidos nos
empiezan a parecer que son aguas un poco
frías Esto se debe a que el agua en
contacto con la piel se lleva el calor a
gran velocidad si estando en el agua
empezamos a temblar lo mejor es salir
pronto de ella secarnos bien y
abrigarnos porque en caso contrario se
puede producir una hipotermia o Dicho de
otro modo una bajada de la temperatura
corporal para evitarlo Tendremos que
usar el traje de buceo adecuado pero ojo
porque si te lo pones demasiado pronto y
es un día soleado o empiezas a mover
equipo pesado te vas a sofocar y
volvemos al punto anterior sufrirás una
hidrocución al entrar al agua por el
cambio repentino de
temperatura el traje de buceo cumple con
dos funciones claves la primera es
mantener el calor de nuestro cuerpo
evitando la pérdida de calor cuando
entramos en contacto con el agua y la
segunda protegernos de irritaciones y
rasguños que se pueden producir al
entrar en contacto con el medio acuático
ya sea por la presencia de animales
urticantes o al rozar noos con las rocas
o con el fondo Marino Recuerda que el
traje de buceo está hecho de neopreno un
material que actúa como Barrera
dificultando que el calor generado por
nuestro cuerpo sea transferido al
exterior tenemos tres tipos de traje de
buceo el traje húmedo que permite la
entrada de agua y suele ser de poco
grosor se utiliza principalmente en
aguas cálidas o templadas y que aunque
nos entre el agua si hemos elegido bien
la talla y nos queda bien ajustado no
debería afectarnos la pérdida de calor
ya que el agua se irá renovando
lentamente traje semisecco que suele ser
más grueso y aislante y además cuenta
con una cremallera que lo hace más
estanco que el traje húmedo son ideales
para aguas más frías ya que la entrada
del agua al interior es menor y además
se renueva más lentamente Por último el
traje seco que es totalmente estanco e
impide la entrada de agua al interior
además cuenta con un sistema especial de
válvulas que nos permite insuflar aire
en su interior debido a su aislamiento
son trajes ideales para aguas muy frías
o contaminadas Pero estos trajes son más
difíciles de manejar Así que requieren
de un entrenamiento específico para que
puedas aprender a utilizarlo otros
elementos muy importantes que
complementan el traje son los guantes
los escarpines y sobre todo la capucha
ya que es por la cabeza por donde el
cuerpo humano pierde el calor más
rápidamente para conservar el traje en
óptimas condiciones tan solo hay que
enjuagarlo bien para que pierda la sal
del mar dejarlo secar por completo no
utilizar pinzas de la ropa que pueden
marcar el neopreno y no doblarlo por
mucho
tiempo al entrar a al agua sentimos una
pérdida de peso debido al empuje que
hace el agua hacia arriba en oposición a
la gravedad terrestre la relación entre
estas dos fuerzas afectan a los objetos
sumergidos si el peso es predominante se
hen si predomina el empuje asciende Y si
estas dos fuerzas se mantienen iguales
el objeto permanece en su lugar este
fenómeno se clasifica como flotabilidad
negativa flotabilidad positiva o
flotabilidad neutra según el principio
de Arquímedes el empuje depende del
volumen del objeto sumergido y del peso
del líquido desplazado obviamente al
utilizar un traje de ne nuestro volumen
aumenta y por tanto flotamos más para
equilibrar esto utilizamos el cinturón
de lastre que añade peso y compensa las
fuerzas facilitando la
inversión cada buceador debe determinar
el número de pastillas de plomo que
necesita basándose en el tipo de traje
el grosor del mismo el tipo de agua si
es dulce o salada y el peso total del
equipo que lleva encima Esta es la clave
para hacer un buen control del lastre
manteniéndote en una posición vertical
en la superficie del agua tendrás que ir
añadiendo o quitando pastill idad de
plomo Hasta que el nivel del agua te
quede a la altura de la máscara sobre
todo Recuerda que si te falta astre te
va a resultar muy difícil descender y
mantenerte en el fondo Y si te sobra
lastre te va a quitar movilidad y te vas
a fatigar enseguida las pastillas de
plomo suelen ser de 1 kg 1 kg y medio 2
kg y las vamos a colocar simétricamente
en el cinturón una vez determinemos
cuánto lastre precisamos también debemos
tener en cuenta que el Jacket
normalmente tiene algunos bolsillos
designado para poner lastre y así
repartirlo mejor por todo el cuerpo pero
del Jacket hablamos enseguida para
colocar noos el cinturón del asre lo más
eficiente es dejarlo estirado en el
suelo agacharnos delante de él agarrar
ambos extremos del cinturón con las
manos y ponernos de pie el cinturón
debería estar colgando por detrás de
nuestro cuerpo Ahora solo hay que
inclinar el tronco hacia delante poner
el cinturón a la altura de nuestros
rillon y sin perder esta posición
abrochar si tratáramos de hacerlo con el
tronco en posición vertical el peso del
lastre estaría tirando de nuestras manos
continuamente y dificultaría muchísimo
el abrochado de la hilla importante si
estamos muy cansados o fatigados y no
podemos mantener la flotabilidad en nos
deberemos desprender del cinturón de la
est más vale una vida que un cinturón y
unos cuantos plomos y otra cosa cuando
nos quitamos el equipo en el agua y lo
vamos a pasar a una embarcación lo
primero que nos quitamos es el cinturón
de lastre así nos quedamos con mayor
flotabilidad para hacer el resto de
maniobras cuando comenzamos a descender
utilizando el ador de la botella
empezamos a ver que mantener una
flotabilidad neutra no es tan sencillo
Porque los cambios de presión que
experimentamos descendiendo afectan al
volumen del chaleco y del traje por
tanto alteran el empuje que
experimentamos para mantener una
flotabilidad neutra alteramos nuestro
volumen inflando o desinflando el
chaleco hidrostático ya que nuestro peso
se mantiene constante a excepción del
aire que vamos consumiendo de la botella
un lastre bien optimizado para nuestro
peso y bien colocado nos asegura tener
una flotabilidad negativa y poder
descender luego manipulando el volumen
del chaleco nos aseguramos de tener una
flotabilidad neutral a cualquier
profundidad y con esta flotabilidad
neutra nos podemos desplazar por el agua
de forma horizontal de forma indefinida
al ofrecer menor resistencia al agua
reducimos el esfuerzo físico y por tanto
reducimos nuestro propio cansancio y
nuestro consumo de aire además si
inflamos el chaleco hidrostático cuando
estamos arriba en superficie nos servirá
de chaleco salvavidas en un caso de
emergencia los chalecos hidrostáticos se
componen básicamente de cuatro elementos
un saco donde almacenamos el aire una
tráquea que controla la entrada y salida
del aire ya bien sea porque insuflando
aire en su interior o porque lo
utilizamos de forma automática con el
aire que viene de nuestra botella una o
varias válvulas de desinflado puede ser
que tengamos una o un par de ellas en
los hombros incluso alguna otra aquí
abajo a la altura de los riñones y por
último un sistema de fijación a la
botella puede que tenga espaldera O
puede que no pero siempre va a tener una
cincha Que agarra fuertemente la botella
y evita que la perdamos por el camino
principalmente existen dos tipos de
chaleco hidrostático el que denominamos
Jacket o el que denominamos alas no sé
cuál será el más adecuado para ti pero
es un buen tema de conversación para
hablarlo con tu instructor de
buceo
la visión bajo el agua se ve afectada
por dos fenómenos que se llaman
reflexión y refracción los cuales
influyen muchísimo en nuestra percepción
visual de los objetos sumergidos además
es muy cómodo abrir los ojos debajo del
agua porque todo se ve borroso y si
encima el agua es salada incluso nos esc
sin embargo con tan solo ponernos la
máscara de buceo todas estas
incomodidades desaparecen y como tenemos
atrapada una capa de aire entre la
máscara y nuestra cara obtenemos unas
imágenes mucho más líquidas hay que
tener en cuenta que los objetos que
vemos debajo del agua a través de
nuestra máscara parecen más grandes y
más cercanos de lo que realmente Está
también hay que tener en cuenta que un
día con poca luz en la superficie habrá
menos luz aún debajo del agua y por
supuesto el oleaje y la profundidad a la
que estemos va a influir también en la
visibilidad ten en cuenta que según
vayas descendiendo hay otro fenómeno que
se llama absorción que va a hacer que
alguno de los colores vayan
desapareciendo Pero no te preocupes
porque los primeros 20 m albergan la
mayoría de organismos submarinos de
interés Eso sí los rojos y naranjas van
desapareciendo los violetas y los
amarillos se van atenuando y van
predominando los azules y verdes que al
fin y al cabo son el el color del telón
de fondo en nuestras inmersiones por
supuesto una linterna sub acuática te va
a ayudar a recuperar los colores ya que
suap de luz no recorre grandes
distancias y no va perdiendo colores por
la absorción la linterna también es muy
útil para explorar lugares como quedad y
Grutas
submarinas la audición bajo el agua
también presenta diferencias notables
respecto a la audición en el aire por
ejemplo cuando alguien está sumergido en
una piscina y lo llamamos no nos Oye
esto se debe a que el sonido en el aire
son compresiones y expansiones de un gas
el aire y no se transmiten en el agua ya
que el líquido es más difícil de
comprimir Sin embargo los sonidos
generados dentro del agua son
expansiones y compresiones de un líquido
y se transmite a una velocidad muchísimo
mayor 4.5 veces más rápido que en el
aire debido a que la densidad del agua
es mayor otro fenómeno que sucede bajo
el agua es que la Fuente emisora del
sonido nos parece siempre que está más
cerca de lo que realmente está y además
como el sonido nos llega casi
simultáneamente a los dos oídos no
tenemos muy clara la referencia y no
podemos localizarlo en el espacio la
falta de referencias para conocer el
punto exacto de donde sale el sonido
desde luego es un poco desconcertante
también tienes que tener en cuenta que
es muy importante que cuando estés
ascendiendo vayas girándose y mirando
alrededor teniendo cuidado de todo lo
que sucede y desde luego cuando vayas a
emerger tienes que sacar primero la mano
porque también las personas que están
fuera en una embarcación te pueden ver y
pueden tener cuidado de no
atropellar
y como debajo del agua no nos podemos
comunicar hablando vamos a tener que
aprender unas señas que sustituyan la
comunicación verbal para llamar la
atención de un compañero bajo el agua lo
más fácil es tocarlo o utilizar algún
tipo de avisador acústico para una
comunicación un poco más precisa podemos
utilizar pizarras pero son incómodas de
usar y bastante más lentas por tanto la
opción que nos queda es aprender las
señas estándar que todos los buceadores
debemos conocer ya que son rápidas y
universales tenemos señas
imprescindibles cruciales para las
situaciones que requieren una
comunicación Clara facultativas útiles
para proporcionar o demandar información
que no es vital Y por último las señas
de control de grupo utilizadas para que
todo el grupo esté al tanto de la
inversión sin más hasta aquí el vídeo de
hoy Espero que hayas aprendido mucho que
te lo hayas pasado bien y nos vemos en
la siguiente
elección
浏览更多相关视频
S1E7: A Symphony of Neutral Buoyancy:Mastering the underwater dance #scubadiving #diving #underwater
How To Make Your Lungs Explode When Scuba Diving
Pressure (Live -SE) - N24
Delta P
Pool Dive Skills Circuit for Public Safety Dive Team
How to Tread Water for Beginners in 10 Minutes - Easy and Effective Technique
5.0 / 5 (0 votes)