Spohn performance stop with the sob stories until I am done testing

KUSTOMBLACK MOTORSPORTS
26 Nov 201704:27

Summary

TLDRIn this video script, the speaker candidly shares his experience with rear control arms installed on his truck. He addresses common issues others have faced, attributing them to not following instructions properly. He emphasizes the importance of proper installation and maintenance, including using a torque wrench and ensuring all bolts are tightened correctly. He also mentions that he is still testing the product and will provide a full review once complete. The speaker, identifying as a mechanic, assures that his truck is well-maintained and that the control arms are performing as expected without causing any discomfort or excessive noise.

Takeaways

  • 🔧 The speaker is testing rear control arms on their truck and emphasizes the importance of following instructions for proper installation.
  • 👷‍♂️ The speaker identifies themselves as a mechanic and offers to fix issues if they were to visit someone's house, suggesting confidence in their skills.
  • 🛠️ There was an initial problem with a squeak after installation, which the speaker attributes to not having tightened a bolt enough during the initial installation.
  • 🔨 The squeak was quickly resolved by using a torque wrench, highlighting the importance of proper tightening.
  • 📚 The speaker criticizes others for not following instructions, suggesting that many problems stem from improper installation.
  • 🚫 The speaker warns against over-greasing the control arms, as it can be an infraction and lead to problems.
  • 🔄 The speaker advocates for re-tightening and re-checking the installation if problems arise, rather than leaving them be.
  • 🚗 The speaker mentions driving their truck hard and doing maintenance, indicating that the control arms are being tested under tough conditions.
  • 🧹 The speaker values cleanliness and maintenance, as they mention cleaning the truck and ensuring all bolts are tight.
  • 🔊 The control arms are described as performance arms, not luxury, which sets expectations for the feel and noise level.
  • 📝 The speaker intends to provide a review after thorough testing, but for now, they are not accepting negative stories about the product from others.

Q & A

  • What is the speaker testing in the transcript?

    -The speaker is testing out the 'spawn reader' and 'control arms' on their truck.

  • What is the speaker's opinion on the stories about rear control arms?

    -The speaker believes that most of the stories are due to people not following the instructions properly.

  • What did the speaker do when they encountered a squeak after installing the control arms?

    -The speaker used a torque wrench to fix the squeak, which they believe was caused by not tightening the bolt enough during the initial installation.

  • Why does the speaker believe they might not have the same problems as others?

    -The speaker thinks they might not have the same problems because they followed the instructions carefully.

  • What did the speaker do to address the issue of the squeak in the control arm?

    -The speaker recorded a video and fixed the issue by properly tightening the bolt with a torque wrench.

  • What is the speaker's advice for those who have problems with the control arms?

    -The speaker advises to take off the control arms, tighten them properly, and put them back on.

  • How does the speaker describe the performance of the truck after installing the control arms?

    -The speaker is happy with the performance, stating that the rear end looks nice and the truck drives well without any problems.

  • What does the speaker do to maintain their truck?

    -The speaker cleans the truck, including underneath, and ensures that all bolts are tight as part of regular maintenance.

  • What is the speaker's profession?

    -The speaker is a mechanic.

  • What is the speaker's approach to testing the control arms?

    -The speaker is driving the truck hard and observing its performance, planning to give a review after thorough testing.

  • What is the speaker's view on the noise level of the control arms?

    -The speaker mentions that while they can hear bumps like everyone else, the control arms do not make excessive noise or feel rough, contrary to some complaints.

Outlines

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Mindmap

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Keywords

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Highlights

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Transcripts

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now
Rate This

5.0 / 5 (0 votes)

Related Tags
Truck MaintenanceControl ArmsMechanic TipsPerformance PartsDIY RepairsTruck PerformanceInstallation GuideTroubleshootingAutomotive AdviceVehicle Maintenance