This Quad is Wife APPROVED! | BetaFPV Pavo20 2" Whoop Build & Review

Summary

视频展示了一款名为Pavo 20的FPV无人机，这是一款重量约150克的2英寸（90毫米）无人机，支持DJI FPV Air Unit 3和Vista等设备。推荐使用3S 450mAh电池，飞行时间可达5分钟。视频还介绍了安装过程、飞行测试以及一些配置细节，最终评价其为性价比高的小型无人机，适合初学者和室内飞行。

Takeaways

• 🚁 视频介绍了Beta FPV的Pavo 20 Whoop无人机，这是一款2英寸或90毫米的无人机，重量大约150克。
• 🔋 Pavo 20 Whoop支持DJI的O3飞行控制器和Vista或等效图传系统，推荐使用3S 450mAh电池，提供约5分钟的飞行时间。
• 📦 无人机包装完备，包括螺丝、天线、LED灯带和额外的螺旋桨，但USB接口不在无人机本身，需要连接一个小型子板。
• 🔧 无人机的框架是透明灰色，电机线不是直接焊接到飞控板上，而是通过连接器连接，便于维护但增加了一些重量。
• 📐 无人机的重量为51克，安装O3飞行控制器后重量为83克，加上电池后总重量为121克。
• 📡 视频提到了Express LRS 2.4 GHz接收器的绑定过程，以及如何使用Betaflight配置器进行设置。
• 🛠 视频展示了无人机的组装过程，包括安装O3飞行控制器、LED灯带和相机电缆。
• 🌬 视频记录了在不同风速条件下的飞行表现，包括在无风和有风的日子里的飞行体验。
• 📹 视频提供了无人机在户外飞行的原始录像，展示了无人机在不同条件下的飞行稳定性和图像质量。
• 💰 Pavo 20 Whoop的价格为104美元，被认为是性价比极高的选择，适合初学者或寻求小型无人机的用户。
• 🔧 视频提出了一些改进建议，如更新Betaflight版本、改进配置和增加更多螺旋桨，以及相机安装位的ND滤镜兼容性问题。

Q & A

Pavo 20 Whoop无人机的尺寸和重量是多少？

Pavo 20 Whoop无人机是一个2英寸或90毫米的无人机，重量大约为150克。

Pavo 20 Whoop无人机支持哪些视频传输系统？

Pavo 20 Whoop无人机支持DJI的O3系统以及Vista或等效的视频传输系统。

推荐的电池类型是什么，它提供多少飞行时间？

推荐的电池是3S 450mAh的电池，据说可以提供5分钟的飞行时间。

Beta FPV提供的LED灯带有哪些颜色？

Beta FPV提供了蓝色和红色的LED灯带。

无人机的USB端口是如何连接的？

无人机本身没有USB端口，需要通过连接一个小的子板到飞行控制器上，然后才能连接到电脑。

无人机的接收器协议有哪些选项？

无人机提供不同的接收器协议选项，包括Express LRS 2.4GHz。

无人机的电机是什么牌子和规格的？

无人机使用的是Beta FPB品牌的电机，规格为1103 8500 KV。

无人机的电机线是如何连接到飞行控制器的？

电机线不是直接焊接到飞行控制器上，而是通过连接器连接，这增加了一些重量，但使维护变得更容易。

无人机的重量是多少，加上电池后的总重量又是多少？

仅无人机框架和电子设备的重量是51克，加上电池后的总重量是121克。

无人机的飞行控制器使用的是哪个版本的Betaflight固件？

无人机的飞行控制器使用的是Betaflight 4.4.1版本的固件。

无人机在户外飞行的表现如何？

在户外飞行时，无人机表现良好，特别是在无风的日子里，可以进行一些自由式飞行动作，但不是专门用于自由式飞行的无人机。

无人机在风大的日子里飞行表现如何？

在风大的日子里，无人机会显得更加摇晃，需要更多的操作来保持稳定，但仍然可以处理得很好。

无人机的平均飞行时间是多少？

无人机的平均飞行时间大约是3分半钟。

Pavo 20无人机的价格是多少？

Pavo 20无人机的价格是104美元。

无人机的配置有哪些可以改进的地方？

无人机的配置可以改进的地方包括使用更近期版本的Betaflight固件，以及更好的配置和调校。

无人机的螺旋桨更换频率如何？

由于无人机的导管非常灵活，所以螺旋桨的更换频率会比较高。

无人机的相机安装座是否适合所有类型的ND滤镜？

无人机的相机安装座对于水平ND滤镜来说有点紧，如果需要安装ND滤镜，可能需要选择垂直类型的。

无人机的信号接收能力如何？

即使在有风的日子里，无人机也没有出现信号强度问题，表现良好。

Outlines

00:00

🚁 评测Beta FPV Pavo 20 Whoop无人机

视频介绍了一款Beta FPV品牌的Pavo 20 Whoop无人机，这是一款2英寸（约90毫米）的无人机，重量大约150克。它支持DJI的03飞控和Vista或同类设备，宣称在推荐电池下可飞行5分钟。无人机包装完备，只需安装视频发射器即可使用。Beta FPV还额外提供了一个替换框架、LED灯带（蓝色和红色）以及推荐的3S 450mAh电池。视频还展示了无人机的开箱内容，包括螺丝、线性天线、额外的螺旋桨和USB连接板。无人机的框架采用透明灰色塑料，电机线通过连接器而非直接焊接到飞控板上，增加了维护的便利性。

05:00

🔧 Pavo 20 Whoop无人机的组装与配置

视频展示了Pavo 20 Whoop无人机的组装过程，包括安装橡胶垫圈、飞控板和摄像头。作者使用了无外壳的03飞控，虽然不推荐，但可以减轻重量。组装完成后，作者进行了首次开机测试，并成功绑定了Express LRS接收器。接着，通过连接小板卡到无人机，使用Betaflight配置器进行设置。视频还提到了飞控固件版本较旧（4.4.1），并计划稍后更新。作者还调整了遥控器的按钮映射，并检查了无人机的基本配置，包括方向、速率和接收器设置。

10:02

🌬️ Pavo 20 Whoop无人机的飞行测试

视频展示了Pavo 20 Whoop无人机在不同天气条件下的飞行表现。首次测试在无风的日子里进行，无人机表现稳定，适合拍摄平稳的影像。作者甚至进行了一些自由式飞行动作。第二次测试在风较大的日子里进行，无人机在风中显得更不稳定，需要更多的操作来保持飞行轨迹。尽管如此，无人机在风中的表现仍然不错，飞行时间大约为3.5分钟。作者还提到了无人机的静音特性和在一个月内多次飞行中未出现任何损坏的情况，强调了其耐用性和性价比。

Keywords

💡Pavo 20

Pavo 20 是 BetaFPV 的一款无人机型号。这是一种 2 英寸或 90 毫米的微型无人机，重量约为 150 克。在视频中，讲述者对 Pavo 20 进行了详细评测，展示了其组装和飞行性能。

💡BetaFPV

BetaFPV 是一家生产无人机及相关配件的公司。在视频中，BetaFPV 发送了一台 Pavo 20 和一些配件给讲述者进行评测。这些配件包括备用框架、LED 灯条和推荐的电池等。

💡03

03 是 DJI 推出的一款摄像头设备。视频中提到的 Pavo 20 支持 03 以及 Vista 等设备，讲述者还提到了使用裸露的 03 摄像头来减轻重量。

💡Vista

Vista 是一种 DJI 的视频传输系统，与 03 类似，Pavo 20 也支持这种系统。视频中提到，Pavo 20 的设计使得安装这些设备变得简单方便。

💡LED 灯条

LED 灯条是用于无人机装饰和照明的配件。在视频中，BetaFPV 发送了蓝色和红色的 LED 灯条给讲述者，讲述者展示了如何安装这些灯条。

💡电池

电池是无人机飞行的重要组成部分。视频中提到 BetaFPV 推荐使用 3s 450mAh 的电池，电池配有 XT30 接头，适合 Pavo 20 的使用。

💡ExpressLRS

ExpressLRS 是一种低延迟、高性能的无线电控制系统。在视频中，讲述者展示了如何将 Pavo 20 的 ExpressLRS 接收器与发射器进行绑定，并进行相关的设置。

💡Betaflight

Betaflight 是一种用于配置和调整无人机飞行控制器的软件。在视频中，讲述者使用 Betaflight 对 Pavo 20 进行了配置，包括调校、端口设置和控制映射等。

💡飞行测试

飞行测试是评估无人机性能的关键步骤。视频中，讲述者在不同的环境中对 Pavo 20 进行了飞行测试，展示了它在风平浪静和风较大的条件下的表现。

💡Freestyle

Freestyle 是一种无人机飞行风格，强调花式动作和自由飞行。视频中，讲述者提到 Pavo 20 不太适合做 Freestyle，但仍然尝试了一些简单的花式飞行动作。

Highlights

Beta FPV Pavo 20是一款2英寸（90毫米）的穿越机，重量约为150克。

支持DJI的O3飞行控制器和Vista或等效设备。

推荐使用3S 450mAh电池，飞行时间可达5分钟。

包装内包含螺丝、线性天线、LED灯带和额外的螺旋桨。

USB端口不在四轴飞行器本身，需要连接小母板才能连接电脑。

框架顶部为普通塑料，但看起来非常灵活。

四轴飞行器几乎组装完毕，支持不同的接收器协议。

电机为Beta FPB品牌，型号为1103 8500 KV。

电机线不是直接焊接到全合一飞控板上，而是通过连接器连接，便于维护。

框架重量为51克，符合广告宣传。

作者使用无外壳的O3飞行控制器，重量减轻约15克。

安装O3飞行控制器时，使用橡胶垫圈和螺丝固定。

LED灯带安装在四轴飞行器周围，增加了视觉效果。

最终重量为83克，加上电池后为121克。

绑定Express LRS接收器时需要参考手册操作。

Beta Flight配置器已检测到通信端口4，固件版本为4.4.1。

基本配置准确，包括MSP显示端口、8K 4K加速度计和电池设置。

作者在无风的户外测试了Pavo 20的飞行表现，视频为03板载记录。

在风较大的一天再次测试，四轴飞行器表现稳定，但需要更多的操作输入。

作者在一个月内进行了多次飞行测试，未出现任何故障或损坏。

Pavo 20的价格为104美元，具有极高的性价比。

作者建议升级Betaflight固件并优化配置，以提升飞行体验。

螺旋桨消耗较快，建议额外购买。

相机安装位置较紧，不适合安装水平ND滤镜。

Pavo 20是作者飞行过的较为安静的小型穿越机之一。

Transcripts

hey folks this mangr welcome back to the

channel I'm checking out this beta fpv

Pavo 20 whoop it's a 2in or 90 mm whoop

it's supposed to weigh about 150 g it

supports the 03 from DJI plus it

supports the Vista or equivalent

supposed to give you 5 minutes of flight

time with the recommended battery and it

comes all packaged like this ready to go

just install your video

transmitter thank you beta fpv for

sending me this for review they also

sent me a replacement whoop frame

because they know how I fly and here's a

closer look at the frame kit I just

realized it's a different color this is

transparent gray whereas the other one

is black and the ducts are nice and

flexible so hopefully they survive

multiple crashes they also sent me these

led strips a blue one and a red one

finally they sent me the recommended

battery this is a 3s 450 mamp battery

looks like there are two in there and

the batteries are rated at 75c oh they

are high voltage set

and they've got a xt30 which is perfect

for the unboxing this is what you see

when you take the top of the box off

we've got some screws and it looks like

we've got some linear antenna here's a

closer look at the antennas that they've

included along with the assortment of

screws that you get we've got more light

strips then we've got some extra props

which is great because that's the first

thing we're probably going to break and

then it looks like the USB port is not

on the quad itself and I've seen this

with other all-in-one so the speedy be

Allin one the same thing you have to

actually connect a little daughter board

like this to the flight controller

before you can connect it to your

computer not ideal but that's fine next

we have the top of the frame this is

just regular plastic but the good thing

is it seems like it's very

flexible looking at the quad it's pretty

much assembled and ready to go it does

come in different receiver protocols

I've got the express lrs 2.4 GHz you can

see the antenna right there which I

don't know how I feel about that it

looks like it'll be susceptible to

damage the motors are beta fpb branded

Motors 1103 8500 KV we've got our

connector right here for our air unit so

that should be pretty plug andplay and

then we've got our all-in-one board at

the bottom over there the other thing

I've noticed is that the motor wires are

not soldered directly to the all-in-one

fleat controller they have a connector

of course that adds a bit of weight but

it does make maintainability a lot

easier here's where you connect that

daughter board so you can get the USB

connector it's very easily accessible

you just have to push these power leads

down and you can just connect it over

here so that is very very easy to do and

then this connector at the bottom is for

your LED strips so if you want to use

the LED strips you will be connecting it

down here the weight of just the frame

with the

electronics 51 G as advertised I'm

building this with my naked 03 which is

an 03 that has no case and I don't know

if I recommend that because as you can

see there are no screws holding that 03

in it's held in by hopes and dreams so

chance of ejection is quite high but

this will save us about 15 G I'll give

you a link in the video description to

how you can do this with your o03 and

we're all installed it wasn't too

difficult to install all you have to do

is put in these rubber grommets very

similar to the grommets we use on our

flight controller and then you pass a

screw from the underside into this top

deck here we can see the 03 is not the

most secure but I don't think it's going

to go anywhere especially because I've

used a button head screw here and that

screw actually works as a bit of an

anchor to prevent it from moving more

than this I did also use the included

linear antenna I'll give the a try but

note that this does support the 03

antenna through the middle hole here

I've got the cable connect did I routed

the camera cable over here just Twisted

it up so that it's out of the way the

LED strip was too cool to leave off so I

did go ahead and install it around the

perimeter so I passed the cable through

there I wrapped it all the way around

and actually the piece it came with was

too long so I just gave it a little snip

snip over here let's do our first power

on 1 two 3 please don't

explode all right that sounded good oh

my eyes final weight check

83 G add battery 121 that is not too

shabby now that we're all assembled

let's go ahead and bind the express lrs

receiver that's on board here to our

transmitter and for this I have to refer

to the manual so what the manual says to

do is to take your battery and turn this

thing off and on very quickly three

times so let's go one 2

three green LED flashing there if you

can see it that means it's now in bind

mode so now I've got my transmitter all

I got to do

is go to my Express

lrs and I should be able

to go under

bind and now it should bind yep there we

go and as soon as we bound I can see the

LED turned off I'm guessing the LED is

on a button let me hold this down which

button is it on not that one did this

one and the reason why I'm holding it

down because I don't know which is the

arm the arm switch so this is normally

my arm

switch okay so right now I have to remap

the buttons because this one turns the

light on and off now that we're at the

computer and we want to use the beta

flight configurator we have to attach

that little daughter board to the Drone

that's that little tiny board that

allows us to then have a USB port I've

connected the USB cable to the computer

and everything powered on which is great

not all aiio all in one flight controls

behave this way some of them require a

battery to be plugged in as well this

one is that's not the case you plug the

cable to your computer and everything

powers on except for your video

transmitter the receiver has powered on

the flat controller has powered on which

honestly is great Behavior to see from

beta fpv I've opened up the betaf flight

configurator and I can see it has

already detected communication Port 4 I

want to do connect first thing I see is

firmware 4.4 4.1 it's a little bit of an

older version of betaflight not too old

but would have been nicer to have

something a little bit more recent we

will update this later now if I pick up

the quad and I want to make sure if it's

going in the right direction so I'm

going left and right that's correct

forward and backwards correct twisty

twisty everything looks good so so far

basic configuration is accurate now I'm

going to go to Port let's see what

they've done here we can see everything

is set up actually quite good we have

MSP display port turned on which is

great because that means we can get the

canvas mode and we can get our onscreen

display showing in the goggles so I'm

not going to be touching anything here

this looks fine configuration 8K 4K

accelerometer Pavo

20 this is all fine battery so good I

see they have set these

calibrations uh pit tuning let's see

what they've done here okay so they've

done some some sort of tuning

already uh let's see rates oh this thing

is going very twisty twisty for some

reason so the rates look fine 670 okay

receiver so

receiver all this is this is a little

bit messed up so we want to flip this

around this one save there we go now we

are good MO

okay what do I want to do I

want

this not to be I want this to be my arm

so this is auxiliary 4 so I want

auxiliary 4 to be my arm okay so I mean

you you're just going to come here and

you're going to modify this based on

your personal

preference let's go to Motors Motors oh

we got B directional dshot very good and

then OSD we can fine-tune this based on

what we want I took the Pao 20 out to my

usual flying area on a very calm day

just to see how it would perform

Outdoors what you looking at here is the

raw footage directly out of the 03

onboard recording or the goggles

recording there is no stabilization on

this so if there is any weird Jitters or

any kind of weird flight characteristics

or shakes they will turn up on this

video here you can definitely get

smoother video If you use one of those

stabilization software so such as gyrl

but I want you to get a feel for how

this thing flies on a calm day outdoors

I was comfortable enough to even do a

couple of freestyle Maneuvers didn't

handle the best In freestyle which I

don't expect it to this is not a

freestyle quad this is more for flying

around on a calm day like this getting

some nice cinematic footage and also not

really disturbing anyone else at the

park it is fairly quiet in comparison to

some of the larger drones I was even

comfortable here to fly around this

playground go behind the trees I never

had any issues with signal strength

given those linear antennas and also no

problems with the tiny Express lrs wire

antenna that's on this

either on the second day I went out on a

more windy day and you saw that wind

sock on the right hand side really

fighting for for dear life so definitely

a lot more of a windy day and it's you

felt it as you flew around so the quad

definitely a lot more shaky and it

required a lot more inputs to keep it on

track it's 120 g quad so you you can't

expect it to be as stable as something

heavier especially over here as I'm

flying around these trees you can see

how much shaking and up and down kind of

bobbing the quad has has I do slow down

here a little bit so you can see just

how much wind there is given the

movement in in the leaves and the trees

it's not the most windy day but

definitely a lot more Gusty than the

first day I was out it's still handled

just fine I'm sure you can work out some

of these Bobs and shakes using gyro flow

or other stabilization software but at

this point it was a little bit out of

its elements and you definitely felt it

when you were flying around on this day

I got about 3 and 1/2 minutes even at

the 3 minute mark it had plenty of power

to do loops and some very simple

freestyle Maneuvers but I did get

roughly 3 minutes and a half and that

seems to be the average I got from most

of my flights whether indoor or Outdoors

I've now spent over a month with the

Pavo 20 and in that month I've done

numerous flights outdoors and many

flights indoors and in that one month I

haven't burnt out anything and I haven't

broken anything and that even includes

connecting the battery in backwards one

time which is something you never want

to do but this did survive that at $104

us Yes you heard right $104 us this

thing is incredible value and it's great

for those looking for a small quad for

indoor flight or close proximity at the

local park or if you are a beginner now

if I start to nitpick and again remember

$14 us I would have love to have a more

recent version of betaflight along with

better configuration the pit tuning was

adequate I did find that receiver issue

where the quad was just turning and

turning and turning until we fixed the

channel mapping I would have love to see

better configuration in those areas and

with the Ducks being so flexible you do

go through props very very quickly they

have included four extra props you will

want to get additional props there I did

notice that the front of the camera

mount here is a little bit tight so if

you are going to be running an ND filter

like I am here you need one of the

vertical ones versus one of the

horizontal ones there just isn't enough

space to fit a horizontal ND filter

there and finally I found that this is

one of the quieter tiny whips I've flown

I've flown other 90 mm whips that are

definitely a lot louder so that was a

welcome change oh my God it's so dark

here boom light

[Music]

on hope you enjoyed this video make sure

to like subscribe and comment and stay

tuned for more videos