How to clean, decontaminate & RESTORE your ceramic coating
Summary
TLDRIn this detailed car care tutorial, Ivan demonstrates how to revive a ceramic-coated vehicle's luster and beading. He covers the essential steps of decontamination, washing, and using specific products like Iron River and All Clean. Ivan emphasizes the importance of proper technique to maintain the vehicle's coating without causing damage. The video also explains how to use a foam cannon for efficient cleaning and introduces Quick Bounce for an instant boost in water beading. The process concludes with a discussion on drying techniques and the use of ceramic gloss for a pristine finish.
Takeaways
- 🚗 The video is a tutorial on how to maintain a ceramic coated car, focusing on a BMW M6 that has lost some of its luster and beading.
- 🔍 Ivan, the host, emphasizes the importance of proper decontamination and washing techniques to revive the ceramic coating and restore the car's shine.
- 💧 The video outlines a yearly maintenance wash routine that can be adapted for more frequent cleaning schedules, highlighting the principles that apply to every wash.
- 🚿 A decontamination towel is recommended for every wash, but not all steps are necessary for every cleaning session.
- 🛠️ The use of an iron remover is demonstrated, especially for high-performance German cars that produce a lot of brake dust, turning the wheels red quickly.
- 🧴 The application of 'All Clean', a diluted all-purpose cleaner, is shown as part of the deep cleaning process for ceramic coated vehicles.
- 🌀 The use of a foam cannon with 'Incredible Suds' is recommended for a thorough wash, with specific dilution ratios and application techniques provided.
- 💦 The video explains the use of 'Water Spot Remover' to remove embedded salt and restore the hydrophobic properties of the ceramic coating.
- 🛑 The host advises against using a clay bar on a ceramic coated car as it requires subsequent polishing, which can damage the clear coat.
- 🔄 The process of mechanical decontamination using a synthetic decontamination towel and iron remover is shown as a safe alternative to claying.
- 🌞 Quick Beads, a product that enhances the hydrophobic properties of the ceramic coating, is applied and distributed, with caution advised against letting it dry in direct sunlight.
Q & A
What is the main purpose of the video?
-The main purpose of the video is to demonstrate the process of reviving and maintaining the ceramic coating on a vehicle, specifically focusing on a BMW M6.
Why might a ceramic coating on a car lose its luster over time?
-A ceramic coating may lose its luster over time due to environmental contaminants, regular use, and lack of proper maintenance.
What is the first step in the maintenance process shown in the video?
-The first step is a decontamination wash, which includes pre-spray of iron remover on the wheels to remove brake dust.
What is the role of 'All Clean' in the maintenance process?
-'All Clean' is an all-purpose cleaner that is diluted and applied to the vehicle's body and wheels to help break down and remove dirt and grime.
How often should the iron remover be used on the wheels?
-The iron remover should be used every couple of washes or at least once a month to keep up with the brake dust accumulation.
What is the significance of using a foam cannon in the washing process?
-A foam cannon is used to apply a rich lather of soap, allowing for better dwell time which helps in breaking down dirt and grime on the vehicle's surface.
What is the importance of using a water spot remover in the maintenance process?
-The water spot remover is important as it helps to remove embedded salts and contaminants from the paint surface, restoring the paint's clarity and beading properties.
Why is it recommended not to use a decontamination towel with water spot remover?
-The water spot remover is acidic, and using a decontamination towel with it could potentially cause damage to the towel or the vehicle's surface if not used correctly.
What is the purpose of using a synthetic decontamination towel in the process?
-A synthetic decontamination towel is used to safely remove any remaining iron particles and other contaminants from the vehicle's surface without causing scratches or damage to the paint.
How does the use of 'Quick Beads' contribute to the maintenance process?
-'Quick Beads' is a product that, when applied, lifts off any remaining iron remover and leaves a durable ceramic coating behind, enhancing the water beading and glossiness of the paint.
What is the final step in the drying process shown in the video?
-The final step in the drying process involves using a ceramic gloss drying aid to ensure a streak-free, pristine finish on the vehicle's paint.
Outlines
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowMindmap
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowKeywords
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowHighlights
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowTranscripts
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowBrowse More Related Video
TUTTE LE CONTAMINAZIONI DA RISOLVERE NEL LAVAGGIO AUTO - 3A Parte
Best Ceramic Spray Coating? Mothers vs Meguiars vs Ethos Pro
How To PROPERLY WASH Your Tesla Model 3/Y! (Plus Interior Cleaning)
BILVÅRDSGUIDE FÖR NYBÖRJARE
कैसी रही Coating ? My Tata Punch Graphene Coating | Cost | Full Process | Benifits | Ceramic
How to Wash Microfiber Towels PROPERLY
5.0 / 5 (0 votes)