Cara Pasang Saklar Tunggal Untuk Lampu // Instalasi Listrik Sendiri

Nashrul Qowi

28 Dec 202203:59

Summary

TLDRThis tutorial demonstrates how to install a patch switch. The process involves preparing materials, peeling and bending wires, and connecting them properly to the switch and power source. Key steps include ensuring the switch is connected to the current source and the fitting is correctly installed. The tutorial highlights the importance of neutral connections and testing the switch to ensure proper function. By the end, viewers are guided through the steps to ensure a working 6-watt lamp installation, with an invitation for questions in the comments section.

Takeaways

😀 Start by preparing the required materials, including 1 inch wire and a switch.
😀 Peel the insulation off one end of the wire, even if the copper is blackened from previous use.
😀 Bend the wire from the ceiling to the wall where the switch will be installed.
😀 Peel the other end of the wire to connect it to the power source (PLN current or meter).
😀 Securely attach one end of the wire to the switch and the other end to the power source.
😀 Make sure the neutral line is connected to the switch, not to the fitting, for proper function.
😀 Before finalizing, ensure the fitting is securely installed and the wiring is correct.
😀 Test the installation by turning the switch on and off to confirm the correct operation.
😀 If you're using a 6-watt lamp, check that it lights up when the switch is flipped.
😀 If anything is unclear during the process, ask questions in the comments for clarification.

Q & A

What is the purpose of the tutorial in the script?
-The tutorial explains how to install a patch switch, including the necessary steps to assemble and connect it properly.
What materials are needed for the installation of the patch switch?
-The materials mentioned include a 2.5 mm wire, a switch, and a power source or meter for current supply.
Why is the copper wire mentioned as blackened in the script?
-The copper wire is blackened because it has been previously used, but it is still functional for the installation.
What is the significance of peeling the wire in the tutorial?
-Peeling the wire is necessary to expose the copper, which allows it to be properly connected to the switch and power source.
How should the wire be bent during installation?
-The wire should be bent from the ceiling down to the wall, leading towards the switch, as described in the script.
What is the function of the 'neutral' wire mentioned in the tutorial?
-The neutral wire serves to complete the circuit and ensures that the power flows correctly when the switch is activated. It is important for the connection to be made to the switch, not the light fitting.
What should be checked to ensure the wiring is correct?
-It should be confirmed that the current goes into the switch and not into the light fitting. This ensures that the switch controls the power flow to the fitting.
What happens when the current is correctly set up in the switch?
-Once the current is correctly set up, the switch can control the flow of electricity, as indicated by the working of a 6-watt lamp when the switch is pressed.
What does the tutorial recommend doing if something is unclear during the installation?
-If something is unclear, the tutorial suggests asking questions in the comments column for clarification.
What is the significance of the final message 'Assalamualaikum warahmatullahi wabarakatuh'?
-The final message, 'Assalamualaikum warahmatullahi wabarakatuh', is a traditional Islamic greeting, commonly used at the beginning and end of videos to convey peace and blessings.