Joule's Law Experiment

Mike Mikhaiel
30 Jan 201403:28

Summary

TLDRThis video script outlines an experiment to explore the relationship between electrical energy and heat, known as Jules' Law. The experiment involves using a power supply, ammeter, calorimeter, voltmeter, digital thermometer, timer, and balance to measure the heat generated by a resistor. The process includes setting up the circuit, measuring room temperature, adding ice water to the calorimeter, and recording temperature changes over time. The goal is to determine the mechanical equivalent of heat by plotting temperature against time and applying the formula J = I * V * Ξ”T / (mass * Ξ”T). The expected result is approximately 4.186 joules per calorie, which aligns with the historical mechanical equivalent of heat.

Takeaways

  • πŸ”¬ The experiment involves electrons flowing through a conductor, causing collisions and heat release, which is governed by Jules' Law.
  • πŸ”Œ The purpose of the experiment is to determine the mechanical equivalent of heat.
  • πŸ› οΈ Required equipment includes a power supply, ammeter, voltmeter, calorimeter, digital thermometer, timer, and a balance.
  • πŸ”— The setup involves a series connection for the power supply, ammeter, and calorimeter, with the voltmeter connected in parallel.
  • 🌑️ The procedure starts by measuring the room temperature using a thermometer.
  • βš–οΈ The mass of the inner cup and ice water mixture is measured using a balance, with the initial mass subtracted to find the mass of the ice water alone.
  • πŸ’§ Ice water is added to the inner cup, which is then placed back into the calorimeter.
  • πŸ”‹ The power supply is turned on, and the voltage is adjusted to achieve a current of 5 amperes on the ammeter.
  • ⏱️ A stopwatch is used to time the experiment, with temperature readings taken initially and every minute thereafter.
  • πŸ“Š Data is graphed as a time versus temperature graph, following lab manual instructions.
  • πŸ” The change in temperature is calculated, and the mechanical equivalent of heat is determined using the equation J = I * V * Ξ”T / (mass * Ξ”T).
  • 🎯 The expected result is a value close to 4.186 joules per calorie, which is the mechanical equivalent of heat.

Q & A

  • What is the main objective of the described experiment?

    -The main objective of the experiment is to determine the mechanical equivalent of heat using Jules law, which involves the flow of electrons through a conductor and the subsequent release of heat due to collisions.

  • What is Jules law in the context of this experiment?

    -In this experiment, Jules law refers to the principle that the amount of heat released when electrons flow through a conductor and collide with the atoms of the resistor depends on the voltage, current, resistance, and time.

  • What equipment is required for this experiment?

    -The required equipment includes a power supply, ammeter, voltmeter, calorimeter, digital thermometer, timer, and a balance.

  • How is the electrical circuit set up in the experiment?

    -The electrical circuit is set up in a series connection with the power supply connected from the positive terminal to the ammeter, then to the calorimeter, and back to the power supply. The voltmeter is connected to the calorimeter through a parallel connection.

  • What is the first step in the experimental procedure?

    -The first step is to measure the room temperature using the digital thermometer.

  • How is the initial mass of the inner cup of the calorimeter determined?

    -The initial mass is determined by placing the inner cup on the balance and masking it to measure its mass.

  • What substance is added to the inner cup of the calorimeter and why?

    -Ice water is added to the inner cup of the calorimeter to serve as a medium for measuring the heat generated during the experiment.

  • How is the mass of the ice water measured?

    -The mass of the ice water is measured by adding it to the inner cup, taking its new mass, and then subtracting the initial mass of the cup to get the mass of the ice water itself.

  • What is the purpose of adjusting the voltage and current during the experiment?

    -The purpose of adjusting the voltage and current is to ensure that the current on the ammeter reads 5 amperes, which is a controlled variable for the experiment.

  • How long does the experiment run for?

    -The experiment runs until the temperature of the water is about 5 degrees above room temperature.

  • What is the equation used to find the mechanical equivalent of heat in this experiment?

    -The equation used is J = I * V * Ξ”T / (mass * Ξ”T), where J is the mechanical equivalent of heat, I is the current, V is the voltage, Ξ”T is the change in temperature, and mass is the mass of the ice water.

  • What is the expected numerical value for the mechanical equivalent of heat in this experiment?

    -The expected value for the mechanical equivalent of heat should be close to 4.186 joules per calorie.

  • How is the change in temperature measured during the experiment?

    -The change in temperature is measured by taking initial and subsequent readings every minute using the digital thermometer until the water temperature is about 5 degrees above room temperature.

  • What is the method used to graph the data collected in the experiment?

    -A time versus temperature graph is created using the data collected and the instructions from the lab manual.

Outlines

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Mindmap

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Keywords

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Highlights

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Transcripts

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now
Rate This
β˜…
β˜…
β˜…
β˜…
β˜…

5.0 / 5 (0 votes)

Related Tags
Physics ExperimentThermal EnergyElectron FlowElectric CurrentResistor CollisionJoule's LawHeat MeasurementCalorimetryTemperature ChangeMechanical Equivalent