CARA MUDAH GANTI V BELT SIGRA CALYA!!! Cek V Belt | Ganti V Belt Sigra

Summary

In this video, the presenter demonstrates how to check and replace the V-belt on a Daihatsu car. Using a 14mm wrench, they loosen the tensioner and remove the old, worn-out V-belt. The presenter shows how the rubber is cracked, indicating it's time for a replacement. After showing the new belt's condition, they carefully reinstall it despite the cramped space, emphasizing the challenge of DIY repairs. They recommend the job for those who enjoy a challenge but suggest that others take it to a mechanic. The video concludes with a friendly reminder to like and subscribe.

Takeaways

• 😀 The video begins with a greeting and introduction, mentioning that the focus is on checking the V-belt of the car.
• 😀 A 14mm wrench is used for the task, and the process is described as straightforward.
• 😀 The first step is to open the car's engine and locate the tensioner for the fan belt (V-belt).
• 😀 The tensioner is loosened by pushing it down using the 14mm wrench to release the tension on the belt.
• 😀 Once the tensioner is loosened, the V-belt is removed and checked for damage, such as cracks and wear.
• 😀 The V-belt shows visible cracks and damage, indicating that it needs to be replaced.
• 😀 The video shares that the car has traveled 110,000 kilometers without replacing the belt, which is now necessary due to its condition.
• 😀 A new replacement belt was purchased for approximately 120,000 IDR.
• 😀 The new V-belt is described as still flexible and safe to use, but it is recommended to replace the old one to avoid potential problems while driving.
• 😀 The installation of the new V-belt is completed, although it was challenging due to the narrow space in the engine compartment.
• 😀 The video concludes by advising viewers that while replacing the belt is possible on your own, it's easier with at least two people due to the confined space, and suggests taking the car to a mechanic if you're unsure.

Q & A

What tools are required to check or replace the V-belt on the car?

The required tools are a 14mm wrench or ring wrench to loosen the tensioner and remove the V-belt.

Where is the tensioner located for the V-belt?

The tensioner is located near the engine, and it has a mechanism to adjust the tension of the V-belt.

What is the purpose of the tensioner in this procedure?

The tensioner is used to loosen the V-belt by applying downward pressure, which helps remove the belt more easily.

How do you check if the V-belt needs to be replaced?

To check if the V-belt needs replacing, inspect it for cracks or wear in the rubber, as these are signs it is time for a replacement.

What is the condition of the old V-belt described in the video?

The old V-belt is cracked and showing signs of wear, with visible rubber damage, indicating that it needs to be replaced.

How can you tell if a V-belt is too damaged to continue using?

If the rubber is cracked or the belt shows significant wear, it should be replaced, as it could break down on the road, causing inconvenience.

Why is it important to carry a spare V-belt in the car?

Carrying a spare V-belt is important in case the current one breaks on the road, so you can replace it immediately to avoid getting stuck.

How difficult is it to replace the V-belt according to the video?

Replacing the V-belt is not too difficult, but it can be challenging due to the tight space in the engine bay, which may require two people for the job.

What is the recommendation for those who are not comfortable replacing the V-belt themselves?

If you are not comfortable with the task, it is recommended to take the car to a mechanic, as they have the necessary experience and tools.

What was the cost of the new V-belt mentioned in the video?

The new V-belt was purchased for around 120,000 IDR (approximately 10,000 IDR), according to the video.