10 CORRIENTE ALTERNA

Takeaways

• 😀 The lab experiment focuses on AC circuits, particularly RL circuits in series, with the goal of verifying their behavior and calculating power and impedance.
• 😀 The main equipment used in the lab includes a function generator, oscilloscope, resistors, inductors, capacitors, and a multimeter.
• 😀 The RL circuit is configured with a 33.000 mH inductor and a 1.8 kΩ resistor, and the experiment involves measuring the voltage, current, and power over time.
• 😀 The oscilloscope is used to display voltage waveforms and to measure peak-to-peak voltage and other relevant values.
• 😀 The frequency of the experiment is set to 2 kHz, and the peak-to-peak voltage is adjusted to 6V, with values for voltage and current measured at different points in the circuit.
• 😀 The relationship between voltage, current, and power is calculated using specific mathematical equations, with the current adjusted for phase shift.
• 😀 The phase shift between voltage and current is a key factor in analyzing power and impedance in AC circuits.
• 😀 Experimental results are compared with theoretical values, with a difference of less than 2% in power calculations, indicating the accuracy of the experiment.
• 😀 Impedance and phase shift are explored further with different configurations, including RC circuits, and a detailed analysis of angular velocity and impedance is conducted.
• 😀 Graphs are generated to show the relationship between impedance and angular velocity, as well as phase angle and angular velocity, with experimental data compared to theoretical predictions.