2008 - 2020 Dodge Grand Caravan Remote Start Activation Hack - works with Chrysler Town & Country

Summary

This video provides a comprehensive guide on how to perform a remote start hack for a 2011 Dodge Grand Caravan. The process involves obtaining a specific key fob, using an OBD2 scanner, and making adjustments to the vehicle's ECU configuration. Key steps include installing a 1K ohm resistor as a bypass for the hood ajar switch, programming new keys, and verifying the remote start functionality. The presenter shares personal insights and troubleshooting tips, ensuring viewers can successfully complete the process while highlighting the necessary tools and modifications.

Takeaways

• 😀 Ensure you have a compatible key fob with a remote start button for your Dodge Grand Caravan.
• 😀 You will need an OBD2 scanner for programming and diagnostics; the recommended model is the V Linker FS USB.
• 😀 To bypass the hood ajar switch, you can use a 1K ohm resistor connected in the appropriate location under the TIPM fuse box.
• 😀 It's essential to program the new key fob using the Car Diag FCA app after acquiring it.
• 😀 Make sure to turn the ignition to the 'on' position before connecting to the car with the OBD2 scanner.
• 😀 After connecting, navigate to 'Diagnostics' and find the 'TIPM configurations' to edit settings.
• 😀 You must set the hood ajar switch configuration in the ECU to allow remote start functionality.
• 😀 Use the provided PIN code to reset the WIN (Wireless Ignition Node) configuration during the process.
• 😀 Verify that the key fobs are programmed correctly; all keys should work with the remote start after setup.
• 😀 If remote start doesn't work immediately, you may need to drive the car for 5-10 minutes before testing again.

Q & A

What is the purpose of the remote start hack for a Dodge Grand Caravan?

The remote start hack allows you to remotely start your Dodge Grand Caravan, even if the original key does not have a remote start button.

What type of key is needed for the remote start function?

You need a key that has a remote start button; if your original key does not have this feature, you must purchase a compatible key.

Which OBD2 scanner is recommended for this process?

The V Linker FS USB OBD2 scanner is recommended as it connects directly to your laptop via USB.

What should be done with the hood ajar switch during the installation?

You should install a 1K ohm resistor in place of the hood ajar switch to bypass its function for the remote start setup.

What steps are involved in programming the new key fob?

After connecting to the car, you need to go through the diagnostics menu to find the option for programming key fobs and follow the prompts to enter the PIN code.

What might cause the remote start to not work immediately after setup?

Some users noted that the remote start function might not work immediately and could require driving the car for a short distance before testing it again.

How do you find the location to install the 1K ohm resistor?

The 1K ohm resistor should be installed beneath the TIPM fuse box, which may require removing the battery for easier access.

What is the function of the PIN code obtained during the setup?

The PIN code is necessary for resetting the WCM (Wireless Control Module) to allow the programming of key fobs.

Is it necessary to reprogram key fobs after setting up remote start?

No, once a key fob has been programmed, it will continue to work with the remote start function without needing to be reprogrammed.

What precaution should be taken when handling the wires during installation?

It's important to use electrical tape to secure the resistor and separate the wires to prevent any short circuits.