MedGyn Cryotherapy System

Summary

The Med Guides cryotherapy system, designed by doctors and engineered by CryoGenesis, ensures performance, safety, and convenience. It works with nitrous oxide and carbon dioxide gas and features autoclave-safe tips, a stainless steel body, and a three-position trigger for optimal performance. Setup is simple: attach the selected tip, connect the pressure gauge to the gas tank, and ensure the pressure is in the green zone before starting. The system has freeze and defrost modes, controlled by the trigger. After use, release the pressure and purge the remaining gas. For more details, consult the manual or visit their website.

Takeaways

• 👨‍⚕️ Designed by doctors and engineered by CryoGenesis to ensure performance, safety, and convenience.
• 🌬️ The system works with both nitrous oxide and carbon dioxide gases.
• 🔧 Includes an extensive amount of autoclaveable tips for various procedures.
• ⚙️ Features a unique O-ring design, built-in regulators, and a stainless steel body.
• 🔘 The system's three-position trigger allows for optimized performance.
• 🔄 Hand-tighten the selected tip onto the probe stem before starting the procedure.
• 💡 Ensure proper pressure levels by checking the pressure gauge on the gas tank.
• ❄️ Freeze mode activates with a gentle trigger squeeze; no need to maintain pressure during the freeze.
• 🔥 To defrost, squeeze and hold the trigger, ensuring the tip is fully defrosted before removing.
• 📖 After the procedure, purge the remaining gas from the system and refer to the manual for more detailed instructions.

Q & A

What is the MedGuide Cryotherapy System designed for?

The MedGuide Cryotherapy System is designed for performance, safety, and convenience in medical cryotherapy procedures. It was created by doctors and engineered by Cryo Genesis.

What gases does the MedGuide Cryotherapy System work with?

The system works with both nitrous oxide and carbon dioxide gases.

What are some key features of the MedGuide Cryotherapy System?

Key features include autoclaveable tips, a unique o-ring design, built-in regulators, a stainless steel body, and a three-position trigger.

What is the purpose of the three-position trigger in the system?

The three-position trigger allows the user to achieve optimum performance by controlling freezing and defrosting during the procedure.

How do you prepare the MedGuide Cryotherapy System for use?

To prepare, hand-tighten the selected tip onto the probe stem, connect the pressure gauge to the gas tank, and slowly open the gas tank valve. Ensure the pressure gauge needle is in the green area for correct pressure.

What should you do if the pressure gauge is in the red or yellow area?

If the pressure is in the red area, it is too high to perform the procedure. If it is in the yellow area, the pressure is too low.

How do you initiate the freeze mode with the system?

To initiate freeze mode, place the probe stem on the designated area and squeeze the trigger gently until it clicks into the first position. The tissue will freeze without needing to maintain pressure on the trigger.

How do you defrost the probe tip after freezing tissue?

To defrost, squeeze the trigger again and hold it until the tip defrosts. Do not withdraw the probe before it has defrosted.

What is the procedure to purge remaining gas after using the system?

To purge the remaining gas, close the pressure gauge, then pull the trigger into the defrost position and hold it.

Where can you find further instructions for using the MedGuide Cryotherapy System?

Further instructions can be found in the system's manual or by visiting the MedGuide website for more information.