Concave Mirrors Worked Example | Ray Tracing 2 of 5 | Geometric Optics | Doc Physics

Doc Schuster
28 Feb 201318:17

Summary

TLDRThe video covers the principles of light reflection, focusing on the behavior of four principal rays (P, F, C, and M rays) when interacting with mirrors. The speaker explains how these rays reflect off both diffuse and specular reflectors and how they converge to form images. Through various examples, including scenarios involving real and virtual images, the speaker also demonstrates how image size and orientation change depending on the object's position relative to the mirror. The discussion concludes with a focus on virtual images and the properties of convex mirrors.

Takeaways

  • 🔆 The script discusses four principal rays involved in image formation: the P Ray, F Ray, C Ray, and M Ray.
  • 📏 When an object reflects light diffusely, rays scatter in all directions, unlike a specular reflector like a mirror.
  • 🌟 The P Ray comes in parallel and bounces out through the focal point after hitting the mirror.
  • 🎯 The F Ray travels through the focus before hitting the mirror and exits parallel to the principal axis.
  • 🏹 The C Ray travels straight through the center of curvature and bounces back along the same path.
  • 🔵 The M Ray hits the center of the mirror and bounces back at the same angle, following the principal axis.
  • 🔍 Real images are formed where rays converge, and they can be projected on a screen since actual light is present.
  • 📉 The height of the image is typically smaller than the object and can be inverted, as seen in certain examples.
  • 🔄 Virtual images appear behind the mirror, but no light actually exists there, so they cannot be projected.
  • 🪞 The script hints at moving to convex mirrors next, which are easier to understand than concave mirrors.

Q & A

  • What are the four principal rays mentioned in the script?

    -The four principal rays are the P Ray (Parallel Ray), the F Ray (Focus Ray), the C Ray (Center Ray), and the M Ray (Middle Ray). These rays are used to trace the path of light and determine where an image forms.

  • What is the key difference between a diffuse reflector and a specular reflector?

    -A diffuse reflector scatters light in all directions due to its rough surface, making it possible to see the object from different angles. In contrast, a specular reflector (like a mirror) reflects light at the same angle it arrives, making it difficult to see the object itself.

  • How does the script explain image formation using the four principal rays?

    -The script explains that an image is formed at the point where the outgoing rays from the mirror converge. These rays include the P Ray, which comes in parallel and exits through the focus, the F Ray, which enters through the focus and exits parallel, the C Ray, which travels straight through the center, and the M Ray, which reflects off the center of the mirror.

  • What happens to an object placed at the focal point of the mirror?

    -When an object is placed at the focal point, the outgoing rays do not converge, and the image forms at infinity, appearing infinitely large but still taking up the same fraction of the viewer’s field of vision.

  • What is the significance of the ‘line of action’ in the context of the mirror?

    -The line of action refers to the axis where the principal rays intersect the mirror. It's essential for determining where the rays meet to form an image, and it helps in tracing the correct path of the rays.

  • What properties does a real image have according to the script?

    -A real image is formed where outgoing rays converge, and it can be projected onto a screen because there is actual light at that location. The real image is inverted and can be smaller or larger than the object, depending on its distance from the mirror.

  • How does the size and distance of the image compare to the object in this example?

    -In the first example, the object is 4 cm tall and 18 cm from the mirror, while the image is 2.3 cm tall (negative because it's inverted) and 9 cm from the mirror. This shows that the image is smaller and closer to the mirror.

  • What changes when an object is placed between the center of curvature and the focal point?

    -When the object is placed between the center of curvature and the focal point, the image is larger and still inverted. In the example provided, the image is 6 cm tall and 16 cm from the mirror.

  • What is a virtual image, and how does it differ from a real image?

    -A virtual image is one that cannot be projected onto a screen because there is no actual light at the location of the image. It appears upright and is located on the opposite side of the mirror from where the object is placed, unlike a real image, which is formed by converging light rays.

  • Why do the rays seem to diverge when using a concave mirror in the final example?

    -In the final example, the rays seem to diverge because the image is virtual and located behind the mirror. The rays never physically cross, but to the eye, it appears as though they come from a point behind the mirror, creating the illusion of a larger object.

Outlines

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Mindmap

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Keywords

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Highlights

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Transcripts

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now
Rate This

5.0 / 5 (0 votes)

Related Tags
light reflectionray tracingmirrorsimage formationphysics lessonsopticsdiffuse reflectionspecular reflectionreal vs virtual imagesscience education