Cara mengoperasikan mesin bubut. (Tehnik dasar)||How to operate a lathe. (Basic technique)
Summary
TLDRIn this video, the amateur enthusiast introduces a beginner's tutorial on operating a lathe machine. The host explains the parts of the lathe, including the Eretan vertical and horizontal plates, and the fixed and removable heads. They demonstrate how to set up the machine for the first time, focusing on the importance of centering and setting the correct diameter for the workpiece. The tutorial guides through the process of cutting and shaping a piece of material, adjusting the machine settings for both outer and inner diameters, and emphasizes the importance of practice and asking questions for beginners.
Takeaways
- 🔧 The video is a tutorial aimed at beginners on how to operate a lathe machine.
- 📏 The presenter introduces different parts of the lathe, including the Eretan vertical, horizontal, and top parts.
- 🔩 The video explains the purpose of different components like the fixed headstock and removable centers for holding the workpiece.
- 🛠️ The tutorial covers the process of setting up the lathe machine for turning operations.
- 📐 The importance of understanding the machine's speed and feed rates is emphasized for beginners.
- 🔄 The presenter demonstrates how to adjust the machine settings for different diameters, such as changing from 34mm to 33mm.
- 👨🏫 The video instructs on how to mount the workpiece using a 1-inch pipe and center the workpiece properly.
- 🔩 The tutorial includes practical steps on how to use the tool post and face plate for securing the workpiece.
- 📉 The presenter shows how to adjust the machine for specific measurements, such as setting the depth of cut.
- 🔗 The video provides a step-by-step guide on how to operate the lathe machine, from setting up to actually turning the workpiece.
- 💻 The tutorial concludes with encouragement for viewers to try the technique, ask questions, and not be afraid of making mistakes.
Q & A
What is the main topic of the video?
-The video is a tutorial on how to operate a lathe machine for beginners.
What is the purpose of the tutorial?
-The purpose is to guide beginners on how to use a lathe machine to create smooth and even surfaces on the inside and outside of a workpiece.
What are the different parts of the lathe machine mentioned in the script?
-The script mentions the Eretan vertical, Eretan horizontal, and the headstock as parts of the lathe machine.
What is the significance of the 'Eretan' mentioned in the script?
-The 'Eretan' likely refers to the main components of the lathe machine, such as the vertical and horizontal supports for the workpiece.
What is the term used for the part where the tool is placed?
-The term used for the part where the tool is placed is the 'tool post'.
What is the purpose of the 'headstock' in the lathe machine?
-The 'headstock' holds the spindle, which is used to hold and rotate the workpiece.
What does the script suggest for a beginner's first attempt at using the lathe?
-For a beginner's first attempt, the script suggests practicing on a workpiece with a diameter of 34, which will be reduced to 33.
What is the importance of setting the correct diameter in the lathe machine?
-Setting the correct diameter is important for achieving the desired size and shape of the workpiece.
What is the role of the 'tool bit' in the lathe operation mentioned in the script?
-The 'tool bit' is used to cut and shape the workpiece by removing material.
What is the significance of the numbers 8-10 mentioned in the script?
-The numbers 8-10 likely refer to the depth of cut settings on the lathe machine, which determine how much material is removed with each pass of the tool.
What does the script suggest for measuring the workpiece?
-The script suggests using a micrometer to measure the workpiece to ensure the correct diameter is achieved.
What is the final advice given to viewers in the script?
-The final advice is to keep trying, not to be afraid to ask questions, and to maintain a positive attitude towards learning the technique.
Outlines
🔧 Introduction to Engine Tuning for Beginners
The speaker begins by greeting the audience and introduces a tutorial on engine tuning for beginners. They mention that they are amateurs following their hobby. The tutorial focuses on running a 'bubut' engine, which seems to be a type of engine tuning or repair. The speaker explains the components of the 'bubut' needle machine, including the vertical, horizontal, and top 'eretan' which are parts of the machine. They also discuss the 'kepala tetap' or fixed head and 'kepala lepas' or removable head. The speaker then proceeds to explain the process of setting up the machine, mentioning the use of a pipe with a diameter of 34 which will be adjusted to 33, and another with a diameter of 27 which will be adjusted to 26. They also mention the importance of the 'ideologi cepat' or fast ideology and 'hendel' for 'gratya'. The speaker encourages viewers to follow along with the setup and tuning process.
🛠️ Engine Tuning Process and Measurements
In the second paragraph, the speaker continues the tutorial by discussing the process of tuning the engine. They mention the use of a tool to measure and adjust the engine's performance, specifically mentioning measurements in 'mili' which could be a unit of measurement. The speaker provides a detailed step-by-step guide on how to adjust the engine, including the use of a specific tool to measure the engine's performance. They also discuss the importance of adjusting the engine's diameter to 33 and 28 for different parts of the engine. The speaker encourages viewers to measure accurately and to not be afraid to ask questions or try the process themselves. The tutorial aims to provide a basic understanding of engine tuning for beginners and emphasizes the importance of perseverance and confidence in learning the skill.
Mindmap
Keywords
💡Eretan
💡Mesin bubut
💡Pipa 1 in
💡Center
💡Bahat
💡Diameter
💡Makan
💡Pengalaman
💡Tutorial
💡Kodrat
💡Gmail
Highlights
Introduction to running a lathe machine for beginners
Explanation of the lathe machine components
Introduction to the Eretan machine and its parts
Understanding the vertical and horizontal Eretan
Explanation of the headstock and tailstock
Setting the speed and feed rate for beginners
Choosing the right diameter for the workpiece
Instructions on assembling the workpiece
Centering the workpiece using the tool post
Using the faceplate to secure the workpiece
Adjusting the lathe machine for accurate cutting
Setting the depth of cut for the lathe
Turning the machine on and starting the cutting process
Explanation of the cutting process and adjusting the machine
Measuring the workpiece diameter after cutting
Adjusting the cutting depth for internal turning
Differences in material handling for internal turning
Final thoughts on the tutorial for beginners
Encouragement to try, ask questions, and stay motivated
Transcripts
Halo assalamualaikum warahmatullahi wabarakatuh kembali lagi dengan teknik amatir bukan bengkel
bukan ahli hanya sekedar menuruti hobi di video kali ini saya akan menerangkan
tutorial menjalankan mesin bubut bagi pemula ya nih untuk percobaan ni ada pipa 1 in the
Ayo kita akan coba bubut bubut rata dalam dan luar ya nih buat pengalaman yang pertama bubut
sebelum bubut kita kenali dulu mesin-mesin needle yang pada mesin bubut Ya ini yang
bahwa ini adalah Eretan alat ini here than alas yang tengah Ini adalah Eretan melintang
Hai yang yang ini adalah Eretan atas ini untuk pahat ya untuk tempat pahat
nih kepala tetap atau Cak sementara yang ini adalah kepala lepas mengetahui center
nih Hendra ideologi cepatan low hak dan ini hendel untuk gratya
untuk pemula ini saya akan coba berat eh kodrat Puput pipa mvnya diameter Rabbani
34 kelihatan yang Nah nanti kita bikin jadi 33 dan diameter dalam
e27 kita nanti bikin jadi 26 Oke Ikutin terus cara setting dan
bubut dan lain-lainnya Oke Guys oke Guys kita pasang benda kerjanya ya pipa 1 in
pertama kita pasang seperti ini pasang
hai lalu kita center ini alat penyedotnya presenter ya guys nyobo ping
tool the f*** telah benda kerja center kita kencengin ini kepala tetap nya ya kita kencengin
e-cash Setelah itu kita gunakan bahat ini ya pahat muka ini untuk
bubut yang sebelah sini dulu untuk meratakannya
11111111111 ya Nah dengan cara ini sekarang kita Hai yang muat ini tadi diameter ini diameter 34
jadi kita bikin jadi diameter 33 ya tapi mata Tomini caranya ini pahat terus kita settings.ini
hidupkan mesinya lagi Hai untuk makan satu mili bisa tu Mi itu Dark loncat2
enggak ya sumpah mini8 Nani 8 9 10 1 Milito sini 8-10 ini kalau 8-9 ini
nih setengah Mini Oke kita coba kita Gmail kan dulu dari email Ya ini Disini angka 19
berarti itu makan satu mili menimbulkan Won chat-an doang kaya nah ini pas noli
Berarti setengah 100 sudah satu mili Oke kita jalankan benar guys Hai guys Hahaha beneran
Hai nih makan luar ya kasihan D1 Mini tadi diameter 34 ini memakai otomatis
Oke cukup Hah lihat pas gajian itu pas 331 mili nah
Hai kawan kita coba makan yang dalam ya guys yang dalam to diameternya
Hai nih 2727 berarti kita jadikan 28 ya
untuk dalam Bahannya seperti ini guys beda sama yang hadiah ini
khusus bener yang dalam Oke lanjut caranya masih seperti tadi Hai nih
Hai makan sedikit ya dikit aja ke satu Mini kita jalannya Oke cukup kita ukur
nah ini pas 28 ya Kesya satu milik sama yang luar sifat 1 miliar Daniel Saya memilih Oke
Guys kira-kira seperti itu tutorial cara membuat website untuk pemula ya
guys ini tahap-tahapannya masih ada yang lebih sulit tapi untuk pemula itu teknik
dasarnya membubut kurang lebih seperti ini Oke Search salam teknik amatir jangan
ragu mencoba jangan lagu Jangan ragu bertanya Pokoknya semangat dan sepenting yakin oke oke
Browse More Related Video
Lathe Safety
Cara setting benda kerja di mesin CNC milling mitsubishi M70
VIDEO 1 Dasar Pengelasan Las Listrik (SMAW)-Bagian Mesin Las, Kode Elektroda, Polaritas, Kekuatan.
Installing a lathe for the machine shop and leveling
Tips dan trik mengoperasikan mesin CNC bagi operator pemula
CARA INSTALL UBUNTU 20.04.1 DI VIRTUALBOX || IT TUTORIAL
5.0 / 5 (0 votes)