Asus Laptop Computer - Dead / No Power / Wont Turn On Fix

Summary

En este video, Jamin presenta una guía detallada para solucionar problemas de un portátil Asus que no arranca. Explica métodos para drenar la energía, verificar el adaptador de alimentación y la batería, y probar la memoria RAM. Además, ofrece consejos para identificar y resolver problemas de hardware, como un BIOS problemático o una placa madre defectuosa. Finalmente, sugiere realizar un reinicio manual del BIOS quitando temporalmente la batería CMOS.

Takeaways

• 🔌 Comience presionando y manteniendo el botón de encendido por hasta un minuto para verificar si es un problema de comunicación.
• 🔋 Desconecte el cargador, volva el portátil y retire la batería si es posible antes de intentar encenderlo.
• 🔌 Realice una prueba de drenaje de energía manteniendo el botón de encendido presionado sin la batería ni el cargador conectados.
• 🔋 Si el portátil se enciende sin la batería, es posible que la batería esté dañada y necesite ser reemplazada.
• ⚡ Si el portátil no se enciende con la batería pero sí con el cargador, es probable que la batería sea la causa del problema.
• 🔌 Use un protector de sobretensiones para proteger su computadora de corrientes eléctricas inadecuadas y no la conecte directamente a la pared.
• 🔋 Mantenga la batería en buen estado permitiéndole descarga y recarga regularmente para evitar que se deteriore.
• 💻 Si el problema persiste, es posible que requiera realizar pruebas adicionales, como verificar el cargador o la placa madre.
• 🛠 Para verificar la RAM, retire ambas módulos, limpie los puertos y vuelve a insertarlos para intentar encender el sistema.
• 🔄 Pruebe cada módulo de RAM individualmente en ambos puertos para identificar si uno de ellos es defectuoso.
• 🔋 Si se identifica un módulo de RAM defectuoso, considere la posibilidad de actualizar a una memoria RAM más rápida y eficiente.
• 🛠 Realice un restablecimiento manual de BIOS quitando temporalmente la batería CMOS de la placa madre y volviéndola a conectar después un tiempo.

Q & A

¿Qué tipo de contenido ofrece el canal de YouTube de Jamin?

El canal de YouTube de Jamin ofrece una variedad de videos sobre computadoras, incluyendo actualizaciones, reparaciones y tutoriales de iniciación.

¿Cómo se puede solucionar un problema de alimentación en un portátil Asus?

Para solucionar un problema de alimentación en un portátil Asus, se sugiere mantener presionado el botón de encendido durante un minuto, desconectar el cargador, dar la vuelta al ordenador y, si es posible, retirar la batería. Luego, voltear el ordenador nuevamente y mantener presionado el botón de encendido durante otro minuto. Después de esto, se recomienda volver a conectar la batería y el cargador para intentar encender el ordenador nuevamente.

¿Qué se debe hacer si el ordenador no se enciende después de seguir los pasos iniciales de solución de problemas?

Si el ordenador no se enciende después de los pasos iniciales, se debe desconectar el cargador, retirar la batería nuevamente, mantener presionado el botón de encendido durante un minuto y luego probar nuevamente con la batería y el cargador conectados.

¿Cómo identificar si la batería es la causa del problema del ordenador no encendido?

Para identificar si la batería es el problema, se debe desconectar el cargador, retirar la batería, mantener presionado el botón de encendido durante un minuto y luego conectar solo el cargador para intentar encender el ordenador. Si el ordenador se enciende, la batería podría estar defectuosa y se recomienda reemplazarla.

¿Qué indica un problema con el adaptador de alimentación?

Si después de retirar la batería y mantener presionado el botón de encendido durante un minuto, el ordenador se enciende al conectar solo el cargador, es probable que el adaptador de alimentación sea defectuoso y se recomienda reemplazarlo.

¿Qué pasos se sugieren para solucionar problemas con la RAM?

Para solucionar problemas con la RAM, se sugiere retirar ambas sticks de RAM, limpiar los puertos de RAM, volver a insertar las sticks de RAM y probar si el ordenador se enciende. Si no se enciende, se debe probar cada stick de RAM individualmente en ambos puertos para identificar si una de las sticks o los puertos está defectuoso.

¿Cómo se realiza un reinicio manual de BIOS en un ordenador?

Para realizar un reinicio manual de BIOS, se debe desvincular el CMOS battery de la placa madre temporalmente, dejárlo desconectado por un tiempo y luego volver a conectarlo. Esto restablece la configuración BIOS a sus valores predeterminados.

¿Qué se debe hacer si los pasos de solución de problemas no surten efecto?

Si los pasos de solución de problemas no surten efecto, es posible que se esté enfrentando a un problema más serio con el BIOS, la placa madre o algún componente de la placa madre, como el conector de alimentación. En tal caso, se sugiere investigar más a fondo sobre estos componentes o buscar ayuda profesional.

¿Por qué es importante usar un protector de sobretensión al conectar el ordenador?

Usar un protector de sobretensión es importante para proteger el ordenador de cualquier corriente eléctrica irregular o sobretensión que pueda dañar el equipo. Además, asegurarse de que la batería no esté siempre conectada y esté recibiendo una carga regular es esencial para su buena salud y longevidad.

¿Qué se debe hacer si se necesita comprar una RAM compatible para el ordenador?

Si se necesita comprar una RAM compatible para el ordenador, se puede encontrar ayuda en la descripción del video o dejar un mensaje con la marca y modelo del ordenador para recibir asistencia específica.

¿Qué se recomienda hacer si el ordenador requiere un drenaje de energía cada vez que se inicia?

Si el ordenador requiere un drenaje de energía cada vez que se inicia, se recomienda asegurarse de que esté conectado a un protector de sobretensión y健康的, y no esté siempre conectado para permitir que la batería se descargue y se cargue regularmente.

Outlines

00:00

💻 Introducción y Revisión de Problemas de Asus Laptop

En este primer párrafo, Jamin, el presentador de un canal de YouTube dedicado a contenido de informática, ofrece una introducción cordial a su audiencia. Explica que en este video específico,演示如何对一台没有电、没有任何生命迹象的Asus笔记本电脑进行故障排除。Al inicio, Jamin pide a los espectadores que den like y compartan el video si les resulta útil y visiten las FAQs en la descripción para responder a posibles dudas. Además, ofrece opciones para apoyar el canal a través de donaciones. Describe el proceso básico de diagnóstico, que comienza con presionar y mantener el botón de encendido durante un minuto, y luego procede a desear la batería y el cargador para realizar pruebas adicionales.

05:01

🔋 Procedimiento de Drenaje de Energía y Pruebas de Componentes

En el segundo párrafo, Jamin profundiza en el procedimiento de drenaje de energía y las pruebas para identificar componentes defectuosos en una computadora. Comienza explicando cómo drenar la energía de los componentes problemáticos y luego sugiere verificar el adaptador de alimentación y la batería. Describe el proceso de intercambiar y probar estos componentes individualmente para aislar el problema. Además, advierte sobre las consecuencias de mantener el ordenador siempre conectado y sugiere mantener la batería en buen estado. Finalmente, ofrece ayuda para encontrar el adaptador de alimentación o la batería correcta si es necesario.

10:03

💡 Pruebas de Memoria RAM y Reajuste del BIOS

En el tercer párrafo, Jamin se centra en las pruebas de la memoria RAM y el reajuste del BIOS como parte del proceso de solución de problemas. Detalla el proceso de extraer y reinsertar los módulos de RAM para verificar si uno de ellos está causando el problema. También cubre el procedimiento para realizar un reajuste del BIOS mediante la desconexión temporal del battery de CMOS. Finalmente, ofrece consejos adicionales para mantener el ordenador en buen estado y promueve futuros videos que profundizarán en otros problemas de hardware.

Keywords

💡Jamin

Jamin es el nombre del presentador del canal de YouTube y el creador del contenido del video. En este video, él proporciona consejos para solucionar problemas en una computadora portátil Asus que no se enciende. El uso de su nombre establece una conexión personal con los espectadores y les brinda confianza en su experiencia y conocimientos técnicos.

💡YouTube channel

El 'YouTube channel' es la plataforma digital donde Jamin comparte sus videos de informática, actualizaciones de hardware y reparaciones. Es el medio a través del cual él llega a su audiencia y comparte su experiencia en solucionar problemas técnicos, como el abordado en este video sobre la computadora Asus.

💡Asus laptop computer

El 'Asus laptop computer' se refiere al modelo específico de computadora portátil que es el foco de este video de reparación. Asus es una marca conocida en la industria de la tecnología, y el video trata de resolver un problema común: la computadora no se enciende o no funciona.

💡Power button

El 'power button' es el botón físico en la computadora que se utiliza para encender o apagar el dispositivo. En el contexto del video, es el primer paso de la solución de problemas, ya que se sugiere mantener presionado el botón de poder por un minuto para intentar reiniciar la computadora.

💡Battery removal

La 'battery removal' se refiere al proceso de desconectar la batería de la computadora portátil. En el video, se sugiere que esto puede ayudar a solucionar problemas de alimentación al eliminar la carga acumulada en la batería y permitir que la computadora se reinicie correctamente.

💡RAM

La 'RAM' (Random Access Memory) es la memoria temporal utilizada por la computadora para almacenar datos que se están procesando actualmente. En el video, se sugiere que problemas con la RAM pueden causar que la computadora no se encienda, y se ofrecen pasos para probar y reemplazar los módulos de RAM si es necesario.

💡CMOS battery

La 'batería CMOS' es una pequeña batería en la placa madre de la computadora que mantiene la configuración del BIOS. En el video, Jamin muestra cómo desconectar temporalmente esta batería para realizar un reset del BIOS, que puede solucionar problemas de arranque.

💡Power adapter

El 'adaptador de alimentación' es el dispositivo que se conecta a la computadora portátil y a la toma de corriente para proporcionar energía. En el video, se sugiere que un adaptador defectuoso puede ser la causa de que la computadora no se encienda, y se ofrecen pasos para probar y posiblemente reemplazar el adaptador si es necesario.

💡DIY

Las siglas 'DIY' significan 'hazlo tú mismo' en inglés, y se refieren a la práctica de realizar reparaciones o mejoras en lugar de contratar a un profesional. En el video, Jamin promueve la autoayuda en la solución de problemas de hardware, brindando pasos detallados para que los espectadores puedan intentar solucionar problemas de inicio de la computadora por su cuenta.

💡Surge protector

Un 'surge protector' es un dispositivo eléctrico que protege los electrodomésticos de sobresaltos de tensión o corrientes repentinas que pueden dañarlos. En el video, se recomienda el uso de un surge protector para proteger la computadora de problemas de alimentación y para contribuir a una mayor longevidad de la batería.

Highlights

Introduction to the YouTube channel and the variety of computer-related content it offers.

The specific topic of the video: troubleshooting an Asus laptop that is not powering on.

The importance of liking, sharing, and engaging with the video content for community support.

The demonstration uses a Lenovo laptop for the tutorial, but the steps are applicable to various computer brands.

The first troubleshooting step: pressing and holding the power button for up to one minute to address potential communication issues.

The suggestion to check the FAQs and leave comments or questions for further assistance.

The option for viewers to support the channel through tips and other methods.

The second step in troubleshooting: unplugging the charger, removing the battery, and performing a power drain.

The explanation of why performing a power drain can help in reviving a non-responsive laptop.

The third step: testing the laptop with the charger plugged in but without the battery to identify a bad battery.

The fourth step: testing the laptop with the battery connected but without the charger to identify a faulty power adapter.

The recommendation to use a surge protector and to allow the battery to discharge and recharge for its health.

The fifth step: testing the RAM by removing and reseating it to address potential issues with loose or faulty RAM sticks.

The process of testing each RAM stick individually and in different ports to identify bad RAM or ports.

The final step: performing a manual BIOS reset by temporarily removing the CMOS battery from the motherboard.

The different presentations of CMOS batteries on motherboards and how to identify and remove them.

The conclusion of the video, emphasizing the video's aim to address common reasons why a computer might not start.

The reminder to engage with the content by liking, sharing, and subscribing, as well as the option to support the channel through tips.

Transcripts

hey guys my name is Jamin thank you for

visiting my YouTube channel where I try

to bring you a wide variety of computer

DIY upgrade and repair videos in this

video I'm going to show you how to

troubleshoot an Asus laptop computer

that's dead has no power it's either got

no signs of life or very little signs of

life before we get going guys please

remember to like the video if this does

help you out share it if you feel like

someone else can benefit if you have any

questions check out the FAQs Below in

the description first it could save you

some time getting an answer but if you

do need to leave me a question or

comment please feel free to I do try to

get to those a couple times a day at

least for those of you who would like to

support the channel a little more you

can leave a tip and there's a couple

different ways of doing that first right

below the video to the right hand side

you'll see the super thanks button you

can click on that you can select a tip

amount here

second way you can use your cash app

find me at Dollar signpc helper you can

leave a dollar amount and you can even

leave a little note okay so now that's

out of the way let's get into the

project laptop computer I'm going to be

using in this demonstration tutorial is

going to be a Lenovo but all the parts

of the same Parts you'll find in your

brand computer okay so here's the

computer not sewing on the first thing

I'm going to have you do guys is just

press and hold your power button down

for up to one minute sometimes it's

simply a communication issue so before

you try anything more severe just press

and hold that power button down for one

whole minute if you guys would like any

suggestions on any tools or supplies

that I use in my shop you can check out

this link above it'll be a link to my

Amazon store on my Amazon store there

are several sections here repair tools

is one of them here you can find common

hand tools that I use along with things

like anti-static mats and bracelets that

help prevent you from damaging your

computer if that doesn't solve your

issue now I'm going to have you move on

to step two we're going to unplug your

charger

flip your computer over and if you can

remove your battery

foreign

if you can remove your battery that's

the better thing to do here it's a

better way to perform this test if you

can't remove your battery you can try

doing this test without removing your

battery for a lot of you it still may

work if you do want to do this Tesla

right way and your battery is internal

and you can't get at it that easy

there'll be a description or there'll be

I'm sorry there'll be a video in the

description below on how to access an

internal battery or if you want

step-by-step instructions for your

computer leave me a comment with your

brand and model and I can try to help

you get into your specific computer

but after you've removed the battery

after you've unplugged your charger

gonna flip your computer back over

and you're going to press and hold that

power button again for one minute so

press and hold that for one minute

a lot of times what happens is power

will build up in various components in

your computer that shouldn't build up

there and that can interfere with the

way it works even it turning on so

hopefully by doing this we're draining

the power from those components that

should not have a power build up

after you're done holding that down

you can put your battery back in

plug your charger back in

and you can try turning on your computer

again if that works for you leave me a

comment let me know if not we're going

to keep pressing on ahead if that

doesn't get your computer turned on

we're going to change it up a little bit

we're going to remove the charger again

remove the battery again

we're going to press and hold for

another minute

and now we're just going to put one item

back we're going to plug in your charger

but we're going to leave your battery

out try starting your computer

if your computer starts up then great

what you've done is you've identified a

bad battery as the thing that's making

your computer not turn on I would at

that point replace it if you want any

help finding the right battery for your

computer let me know again leave me your

brand and your model number I can help

you out if that doesn't help your

computer turn on then we're going to

unplug your charger press and hold the

power button for another minute

and now we're going to put your battery

back in

and we're going to leave the charger out

so we're going to kind of swap them and

try the other one now try turning your

computer on

same thing as before if your computer

turns on you've identified your power

adapter as most likely faulty I would at

this point replace your power adapter uh

your battery's probably good one thing

also to note guys if these things are

not helping your computer try doing them

a couple times try holding on the power

button for one minute try that

repeatedly try taking your battery and

charge up try this process a couple

times some of you may need that to fully

drain the power one thing I did want to

shout out guys about this power drain

procedure if it happens every once in a

while to a computer that's fine it's

kind of an unfortunate normal thing with

some Electronics however if you find you

have to do this every time you need to

start your computer there's a problem

the first thing I would suggest make

sure you're using your computer plugged

into a surge protector and a healthy one

not a super old one that's not working

don't plug your computer directly into

the wall all the time the surge

protector will protect it from any bad

power coming through also make sure your

computer is not always plugged in and

charging a battery to stay healthy needs

to regularly discharge and charge if

your computer is always plugged in and

your battery is never getting that

workout the battery is going to go bad

and may start affecting your computer

like this if you have checked both those

off your list and your computer still

needs this every time you start your

computer there'll be a video link below

in the description showing you how to

test your charger to make sure it's good

at that point you may want to consider

replacing your charger or your battery

next test I have you running this video

is going to involve your RAM and just

like your battery some of you may be

able to easily access your RAM through

one of those quick panels if not again

leave me your brand and your model and I

can help you get inside your specific

computer to access your RAM if it's not

easy so before getting into my computer

the first thing I'm going to do is

remove my battery make sure your your

cable is unplugged we want as little

power running through this computer as

possible when you open it and if your

battery is internal you want to take

that out first thing when you get into

your computer I'm just going to go

around now and remove the screws to my

panel

so here are two Ram ports right there

so most of you will see something like

this you'll have two ramp ports some may

only have one

um basically what we're gonna do here

guys is test for either a bad stick of

ram a loose stick of Ram or even a bad

Port so the first thing you want to do

is take both of your RAM sticks out give

the ram ports a good blow blow on them

make sure it's clean and put your RAM

sticks back in try starting your

computer

the way that RAM sticks usually set in

there are two metal arms on either side

they're held together by Springs so when

you push those metal arms away the ram

will release

like that and then you just slide the

rim out it's got a long Port short Port

that's how it goes in there you can't

put it in backwards it has to go in the

right way so that's how you take your

RAM out again take both your RAM out put

them back in try starting your computer

if your computer starts it could have

just been loose it it happens

um if your computer it doesn't start

we're going to test for each Ram stick

now so take one of your RAM sticks put

it into one of the ports snap it in

correctly make sure that it's secure try

turning on your computer

if your computer works you've identified

the other Ram stick is bad if your

computer doesn't work we're going to

switch ports we're going to take it out

put it in this port

try starting your computer

if your computer does not start then

we'll take this Ram stick out and then

put your second ram stick again I I only

had one but you'd want your second ram

stick try that in both ports see if it

works try turning it on in in both ports

if you only have one stick like I do

um you can try just reseeding it you can

try unplugging it plugging it back

trying the computer and then moving it

from one port to the next that that can

test for that but you need another good

stick to test it if if this is good if

this Ram's bad you won't know

um you need another stick of ram

there'll be a video link below in the

description on how to purchase the

correct compatible RAM for your computer

if you don't know how so for those of

you who find out it's your RAM no big

deal Ram's not one of the most expensive

parts of a computer however it is a big

factor in the speed of your computer so

if you do have to replace your RAM may

as well upgrade there'll be a video link

below in the description showing you how

you can find compatible Ram you can also

leave me a message if you have any

questions the third and last test I'll

show in this video is how to perform a

manual bios reset on your computer by

temporarily removing your CMOS battery

from your motherboard I'll show you that

now so this is your CMOS battery it's a

little round component here it looks

like a watch battery inside it's wrapped

in black electrical tape and it plugs

into a port another common CMOS battery

presentation is on this motherboard here

that's another common way you can see a

CMOS battery on a motherboard all you

would do was is unplug it from the port

don't pull on the wire just put your

fingernails on either side of that thing

and slide it out

a little at a time Wiglet out and then

you've unplugged it so that's a bios

reset leave that unplugged for a while

and then just plug it back in

if you have this other kind of CMOS

battery here

uh the way to get this out is a spring

here that holds it in and a spring

underneath here that pushes it up so

we're going to want to push this battery

back and up be very careful though

because this right here is very

breakable if that plastic part snaps off

then your battery won't be secure so

just be very careful push in and up

like that

and it comes out like that and then

again you would leave it out for a time

and then you would slide it back in and

snap it back down into place so those

are the three tests I'm going to show

you how to run on a dead computer in

this video there's some of the easiest

and some of the most common reasons why

a computer is not starting that I find

in my shop keep in mind you may have to

try these steps multiple times in order

to see results in some of your cases

especially I'm talking about the power

drain procedure you may have to try it

two maybe three times to see a result in

some computers however if you're still

not seeing any new signs of life after

these steps you're probably looking at a

little heavier problem with your

computer than what we've gone over

you're probably looking at a weird bios

issue a motherboard issue a motherboard

component issue maybe like a power jack

or something being bad I'll go more in

depth into other causes other

troubleshooting steps in my next video

dealing with this problem thanks so much

for watching the video guys as mentioned

before please remember to like and share

if it helps you out if you think it can

help someone else out feel free to

subscribe if you enjoy DIY computer

content like this and if you want us to

put the channel a little further by

leaving a tip it's very appreciated

thank you so much for watching again I

look forward to seeing you on my next

video