Spanning Tree Protocol - N10-008 CompTIA Network+ : 2.3

Professor Messer
12 Oct 202106:51

Summary

TLDRThe video script discusses the absence of a time-to-live mechanism in layer 2 Ethernet, which can lead to network loops and congestion. It introduces the IEEE 802.1D Spanning Tree Protocol (STP), developed by Radia Perlman, to prevent loops by blocking certain ports. The script explains STP's port states, including blocking, listening, and forwarding, and how it identifies root and designated ports to maintain a loop-free network. It also touches on the Rapid Spanning Tree Protocol (RSTP), which improves convergence time to handle network changes more swiftly.

Takeaways

  • 🌐 IP version 4 has a time to live (TTL) field to prevent looping packets, but Ethernet (layer 2) lacks this mechanism.
  • πŸ” Without a TTL equivalent, Ethernet frames can loop indefinitely in a network until the loop is physically removed.
  • πŸ›  Loop protection is crucial in Ethernet networks to prevent frames from endlessly circulating and consuming resources.
  • πŸ”Œ A simple mistake like connecting two cables between switches can create a loop in a network.
  • 🚫 Loops can lead to network congestion and ultimately a complete halt of communication on the affected network segment.
  • πŸ”„ Unplugging the problematic cable is a straightforward but crude solution to break a loop and restore network functionality.
  • πŸ“š The IEEE 802.1D standard, developed by Radia Perlman, introduced the Spanning Tree Protocol (STP) to prevent loops in bridged or switched networks.
  • 🌳 STP operates by placing interfaces in different states (like blocking, listening, and learning) to understand and prevent network loops.
  • 🚦 STP can block traffic on certain ports to prevent loops, ensuring a loop-free network topology.
  • πŸ”„ In case of network changes, STP can reconfigure the network to maintain a loop-free path, even if some connections are lost.
  • ⏱ Traditional STP has a convergence time of 30-50 seconds, which is improved to about 6 seconds with the Rapid Spanning Tree Protocol (RSTP).

Q & A

  • What is the primary function of the Time to Live (TTL) field in IP version 4?

    -The primary function of the TTL field in IP version 4 is to identify when a packet has been looping through separate routers and to eventually drop that packet from the network to prevent it from circulating indefinitely.

  • Why is there no Time to Live mechanism in layer 2 Ethernet?

    -Layer 2 Ethernet does not have a Time to Live mechanism because it operates at the data link layer and does not have the capability to track packet loops over a network. It is designed to handle frame transmission between directly connected devices without the need for such a mechanism.

  • What happens if a loop is created in a network with Ethernet switches?

    -If a loop is created in a network with Ethernet switches, frames introduced into that loop will circulate indefinitely, consuming all available bandwidth and network resources, eventually leading to a complete communication breakdown for all devices connected to the switches involved in the loop.

  • How can a loop in an Ethernet network be prevented?

    -A loop in an Ethernet network can be prevented by using loop protection mechanisms, such as the Spanning Tree Protocol (STP), which disables certain ports to avoid loops and ensures a loop-free network topology.

  • Who created the Spanning Tree Protocol and for what purpose?

    -The Spanning Tree Protocol was created by Radia Perlman in 1990 as an IEEE standard 802.1D to prevent loops in bridged or switched networks by creating a loop-free logical topology.

  • What are the different port states that an interface can be placed in by the Spanning Tree Protocol?

    -The different port states that an interface can be placed in by the Spanning Tree Protocol include blocking, listening, learning, forwarding, and disabled states.

  • What is the purpose of the blocking port state in the Spanning Tree Protocol?

    -The purpose of the blocking port state in the Spanning Tree Protocol is to administratively block all traffic from going in or out of that interface to prevent the creation of loops in the network.

  • How does the Spanning Tree Protocol handle network outages or changes?

    -The Spanning Tree Protocol handles network outages or changes by reconverging and recalculating the network topology to adapt to the new conditions, enabling alternative paths for traffic flow and ensuring connectivity is maintained without loops.

  • What is the Rapid Spanning Tree Protocol (RSTP) and how does it improve upon the traditional Spanning Tree Protocol?

    -The Rapid Spanning Tree Protocol (RSTP) is an updated version of the Spanning Tree Protocol that reduces convergence time from 30 to 50 seconds down to six seconds, making it more suitable for modern networks that require faster recovery from topology changes.

  • How does the Spanning Tree Protocol ensure that only one bridge is the root bridge?

    -The Spanning Tree Protocol ensures that only one bridge is the root bridge by using a set of algorithms that determine the bridge with the highest priority or the lowest bridge ID to be the root bridge, thus preventing loops by designating a single logical path for network traffic.

Outlines

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Mindmap

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Keywords

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Highlights

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now

Transcripts

plate

This section is available to paid users only. Please upgrade to access this part.

Upgrade Now
Rate This
β˜…
β˜…
β˜…
β˜…
β˜…

5.0 / 5 (0 votes)

Related Tags
Network LoopsEthernet SwitchingSpanning TreeRadia PerlmanIEEE 802.1DLoop ProtectionBridged NetworksRapid STPNetwork EfficiencyData Connectivity