DJI 03 & Goggles 3 Safety Critical Dropout Issue - DJI You Need To Fix This!

Summary

The video serves as a public service announcement and warning regarding a critical safety bug with the DJI O3 system when paired with the new DJI Goggles 3. Since a firmware update, users have reported random video loss, requiring a reboot to restore signal. The issue seems specific to the O3e unit and Goggles 3 combination. The creator advises against using DJI's own remote controller system and recommends not upgrading firmware for users with Goggles 2, Integra, or V2s. The video also touches on recent discounts on the O3 unit and speculation about the upcoming DJI O4 release.

Takeaways

• 🚨 PSA Warning: The video is a public service announcement and warning about a potential safety-critical bug with the DJI FPV system.
• 📡 Firmware Issue: A recent firmware update (version 01.03) for the DJI FPV unit added support for the new DJI Goggles 3, which seems to be linked to random video loss issues.
• 📈 Increasing Reports: The number of reports about this issue has been growing on social media, DJI forums, and Discord servers.
• 🔍 Specific Combination: The problem appears to be specific to the combination of the DJI FPV unit and Goggles 3, with no similar reports for Goggles 2, Integra, or V2s.
• ⚠️ Safety Concerns: The random loss of signal is a serious safety concern and requires DJI's immediate attention to address the bug.
• 🛠️ Mitigation Advice: Users are advised to reset and rebind their FPV units and Goggles 3 to mitigate potential issues.
• 🛰️ GPS Importance: It's recommended to always fly with GPS and ensure fail-safe settings are in place to handle video loss.
• 📵 Independent RC Link: Advised against using DJI's own remote controller system with the FPV unit due to potential video and control link dropouts.
• 🚫 Firmware Upgrade: Users with Goggles 2, Integra, or V2s are advised not to upgrade their FPV unit firmware to avoid potential issues.
• 💻 DJI's Responsibility: The video calls on DJI to address the random signal loss issue as it poses safety risks and affects user trust.
• 🛍️ Discount Speculation: The video mentions discounts on the DJI FPV unit, possibly in preparation for the release of a new product (DJI FPV 4) expected around February or March next year.

Q & A

What is the main concern raised in the video?

The video raises a safety critical bug with the DJI O3 system when used in combination with the new DJI Goggles 3, causing random video loss that only resolves after a system reboot.

What firmware update is mentioned in the video as potentially causing the issue?

The firmware update mentioned is version 01.03 for the O3e unit, which added support for the new Goggles 3.

Are there any reports of this issue with the O3 system and Goggles 2?

No, the video states that there have been no reports of this issue with the O3 system and Goggles 2, Integra, or V2s.

What is the recommended action for users experiencing the video loss issue?

The recommended action is to completely refresh the firmware on the O3 unit and Goggles 3, reset everything, rebind, and start again. Also, ensure fail-safe settings are set and known in case of video loss.

What advice is given regarding flying with the DJI's own remote controller system?

The advice is to not fly with DJI's own remote controller system when using the O3e unit, as it is part of the main video link and may drop if there is a video link problem. Instead, use an independent RC link.

What is the advice for users with the O3 system and Goggles 2, Integra, or V2s who have not updated their firmware?

The advice is to not upgrade the firmware on the O3 unit and to stay with the current version, as there is no compelling reason to upgrade to version 01.03 for additional features.

Is the issue reported to be specific to any particular region or user group?

The issue seems specific to the combination of the O3e unit and Goggles 3, and there is no indication that it is region-specific or limited to a certain user group.

What is the current understanding of when the DJI O4 might be released?

The video suggests that the DJI O4 is not imminent and is likely to be released around February or March of the following year.

What is the significance of the discounts on the O3 unit mentioned in the video?

The discounts on the O3 unit may be in preparation for the release of the O4 and also to keep sales numbers up during the winter season.

What is the concern regarding buying DJI products from AliExpress mentioned in the video?

The concern is that DJI does not offer a Global Warranty, so if there is a problem with a product bought from AliExpress, the buyer may have to ship it back to China at their own cost.

How can users report issues or share their experiences related to the video's content?

Users are encouraged to share their experiences and report issues in the comment section of the video or on the mentioned Discord server.

Outlines

00:00

🚨 Safety Warning on DJI O3+ Goggles 3 Firmware Issue 🚨

This paragraph addresses a critical safety concern regarding the DJI O3 system when paired with the new DJI Goggles 3. Following a firmware update (version 01.03), reports have emerged of random video loss, which only resolves upon rebooting the system. The issue appears specific to the O3 unit in combination with Goggles 3, with no similar reports for the O3 and Goggles 2, Integra, or V2s. The speaker advises caution, recommends resetting the system, ensuring fail-safe settings are robust, and discourages the use of DJI's own remote controller system due to potential link dropouts. The speaker also advises against upgrading the firmware on O3 units if using older goggles to avoid potential issues.

05:02

📉 DJI O3 Discounts and Speculation on Future Releases 📉

The second paragraph discusses recent price reductions for the DJI O3 unit, indicating that discounts are appearing at various retailers and on DJI's website in some regions, though not uniformly across the globe. The speaker warns against purchasing from platforms like AliExpress due to the lack of global warranty from DJI, which could result in high return shipping costs. There is speculation about the upcoming DJI O4 release, with the speaker suggesting that it is not imminent and likely to be released around February or March of the following year. The speaker advises against waiting for the O4 if a good deal on the O3 is available, emphasizing that the O4's release date is not confirmed and should not influence immediate purchasing decisions.

Keywords

💡PSA

A PSA, or Public Service Announcement, is a message intended to raise awareness about an issue of public concern. In the video, the creator uses it to draw attention to a potential safety issue with the DJI O3 system and the new DJI goggles 3, emphasizing the importance of the message for the community's well-being.

💡DJI O3 system

The DJI O3 system refers to the drone flight control system developed by DJI. In the context of the video, it is identified as having a critical bug when used in combination with the new DJI goggles 3, which could lead to random video loss, posing safety risks to users.

💡Firmware update

A firmware update is a software update that improves or fixes a device's functionality. The video discusses a specific firmware update (fmw version 01.03) for the DJI O3e unit that added support for the new goggles 3 but also introduced a bug causing random video loss.

💡Random video loss

Random video loss refers to the unexpected and spontaneous loss of video feed in a system. The video script describes this as a critical issue with the DJI O3 system when paired with the new goggles 3, where the signal is lost and only resumes after a system reboot.

💡Reboot

Rebooting is the process of restarting a device to clear temporary data and resolve issues. In the video, rebooting is mentioned as the only current solution to restore the video signal after it is lost due to the bug in the DJI O3 system.

💡Fail safe settings

Fail safe settings are pre-configured actions that a drone takes in case of signal loss or other emergencies. The video advises users to ensure their fail safe settings are 100% confirmed to mitigate risks associated with the random video loss issue.

💡DJI RC

DJI RC refers to the remote controller provided by DJI for their drones. The video warns against using DJI's own remote controller with the O3e unit because it is part of the main video link, and if there is a problem with the video link, the RC link may also fail.

💡Independent RC link

An independent RC link is a separate control link for a drone that is not dependent on the video transmission system. The video recommends using an independent RC link to allow for fail safe triggers or other actions in case of video loss.

💡Firmware version 01.03

Firmware version 01.03 is the specific version mentioned in the video that was released to support the new DJI goggles 3 but is also associated with the random video loss bug. Users with existing O3 systems are advised not to upgrade to this version unless necessary.

💡Discounts

Discounts refer to price reductions offered by retailers. The video mentions that discounts on the DJI O3 unit are starting to appear, possibly in preparation for the release of a new product (DJI 04), and also as a strategy to maintain sales during the slower winter season.

💡DJI 04

DJI 04 is the anticipated successor to the DJI O3 system. The video script addresses speculation about its release, suggesting that it is not imminent and likely to be released around February or March of the following year, advising viewers not to delay purchases based on expectations of its imminent arrival.

Highlights

A safety critical bug has been identified with the DJI O3 system when used in combination with the new DJI goggles 3.

A firmware update (fmw version 01.03) for the O3e unit added support for the new goggles 3 and has been linked to the issue.

Random video loss on the system has been reported by users since the firmware update.

The issue appears to be specific to the combination of the O3e unit and goggles 3, with no reports of similar issues with goggles 2 or other models.

Many users may not have updated their firmware, as the new update was primarily for goggles 3 support.

Social media, DJI forums, and Discord servers have seen an increase in reports about the video loss issue.

A demonstration video on the DJI Forum shows the random loss of O3 signal that requires a reboot to restore.

Recommendation for users experiencing the issue: perform a complete refresh of the firmware on both the O3 unit and goggles 3.

Advice to always fly with GPS and ensure fail-safe settings are configured to handle video loss.

Discouragement against using DJI's own remote controller system due to potential video and RC link dropouts.

Advice for O3 users with goggles 2, Integra, or V2 to not upgrade the firmware to avoid potential issues.

No reports of the issue with the Avata 2 or other goggles combinations, suggesting the problem is specific to the O3e and goggles 3.

DJI is urged to address the critical bug due to its safety implications.

A call for users experiencing the issue or not to share their experiences in the comments for further investigation.

Discounts on the O3 unit have been observed, possibly in preparation for the release of the O4 and to boost winter sales.

DJI does not offer a Global Warranty, cautioning against importing from platforms like AliExpress.

Speculation about the release of the O4 suggests it is not imminent and likely to be around February or March next year.

A reminder for users to share their experiences with the current firmware and goggles combination in the comments.

An invitation for support through Patreon and a thank you to current patrons, as well as an invitation to join the Discord server.

Transcripts

this video is a PSA and a warning about

what I believe is a safety critical bug

with the DJ 03 system in combination

with the new DJI goggles 3 last month DJ

released a firmware update for the 03e

unit fmw version

01.03 and that update added support for

the new goggles 3 since that released we

started to see random reports of people

could complaining about random video

loss on the System since then I have

seen these reports build and I've seen

more and more of them being posted on

social media DJ forum and even on places

like my Discord server and it's now at

the stage where I feel it warrant a

warning because it definitely appears to

be the case that there is a bug that is

causing the 03 ear unit when used with

the goggles 3 to just lose signal

randomly and it doesn't come back until

you reboot

now just to be clear right now I believe

this is specifically related to the

combination of the 03e unit and goggles

3 I have not seen reports of this with

the o03 and goggles 2 the Integra or the

V2s however I will just put a caveat on

that is that this new film that DJ

released was specifically to allow

support for the goggles 3 I think it's

very likely many users out there who are

running 03 on say goggles 2 and integr

or the V2s may not have updated this

firmware so today it is not remotely

clear if the issue is with the O3 new

firmware the goggles 3 the combination

of these two and if goggles 2 users

would also get this issue if they were

to update the firmware on their 03 a

unit today most users with existing 03s

are going to still be on the same FM

where they were on before cuz there was

no good reason other than support for

goggles 3 to update it to the latest

version now there are posts and threads

about this popping up there's some on

Facebook there's some on DJ forum and

I've even had it talked about on my

Discord if we just quickly look at the

thread on the DJ Forum there are people

posting comments and videos and

interestingly there's a quick video here

that nicely demonstrates what happens

it's simply a random loss of 03 signal

and it doesn't come back until you

reboot the system it's just stopped

there completely out the blue and then

it doesn't return until he went and

found the aircraft in the grass now as

I've said already right now it only

seems to be O3 ear unit in combination

with goggles 3 if you are flying with

this combination my recommendation is

number one completely refresh the frame

we on your 03 a unit and your goggles 3

reset everything to scratch rebind and

start again just as a mitigation factor

to hopefully stop something that might

happen secondly I would strongly advise

you always fly with a GPS a minute or at

least make sure your fail safe settings

are 100% and make sure you know exactly

what's going to happen in the event of a

random video loss I also again will

stress my recommendation that you do not

fly with dji's own remote controller

system when using the 03e unit dji's RC

is part of their main video link and if

you have a problem with the video link

the chances are your RC link will drop

as well I always advise you have your

own independent RC link that allows you

to trigger fail safe punch out or take

whatever action you want to take in the

event of say video loss now if you're an

03 user with a set of goggles 2 Integra

or V2 goggles my advice to you is do not

upgrade the firmware on your 03 ear unit

stay exactly as you are do not change

anything and wait to see what happens

with this in the future there is no good

reason to upgrade to this version

01.03 for 03 cuz it gives you no other

features something else just to note on

this is I've also not seen reports of

this issue on the avata 2 in combination

with the goggles 3 or any of the other

goggles it really does seem specific to

the 03e unit in the goggles 3 at this

moment in time now today this is all we

know about this issue there is no more

information

other than this DJI if you're listening

you need to get on top of this a

complete random loss of signal is not

acceptable it is not what we've seen

from the system in the past and it is

something that does raise some serious

concerns about the safety of using these

two parts of your ecosystem together as

I've said already it only seems to be

goggles 3 but it isn't confirmed 100% is

the case and I'd be interested to see if

there are people out there who have

upgraded their o3e unit to the latest

firmware but are flying with the goggles

to an Integra with that new firmware if

you're having issues now as I've said

already I deem this as a critical bug

because it has safety implications and

as a result of that DJI you need to fix

this

ASAP I also want to say if you're out

there and you're flying the3 with the

goggles 2 an Integra and you have

updated your firmware to that latest

Vision let me know if you're having this

happen let me know in the comments if

you're not having problems as I did say

at the start today all we know is it is

goggles 3 with 03 but that doesn't mean

it isn't goggles 2 with 03 with the

latest firmware it's really not the case

as far as I can see that everyone would

have rushed out to upgrade and as a

result of that this could be being

masked as a goggles 3 issue simply

because those were the users that had to

to update the firmware now before we

wrap this one up I just want to add you

may have seen that some discounts are

starting to appear on the 03 a unit at

some retailers on Sunday's live stream I

mentioned that flywheel had dropped the

price but I have now heard that it is

spreading among dealers some areas in

the world are even seeing discounts on

dji's website it isn't clear everywhere

where it's happening I believe it is in

the US but it's not in the UK and you're

even seeing some dealers in the US offer

the discounts as well for instance the

DJI store has dropped the price in the

US down to

$179 in the US dealers have also dropped

the price as well get fpv have it for

179 as well down from 229 and for the

rest of the world there are discounts

available on the likes of AliExpress

although do be warned DJI does not offer

a Global Warranty I always advise

against importing a DJI product if you

were to have a problem with one bought

from the likes of AliExpress here you

would be required to ship it back to

China most likely at your own cost DJI

does not offer a Global Warranty like

other manufacturers this has obviously

caused a huge amount of speculation and

everyone is waiting and excited for 04

but don't hang on and think 04 is around

the corner in 1 two 3 4 weeks my

understanding and belief is we're

probably not going to see 04 till around

February or March time next year and the

likelihood is DJ is starting to do some

discounts now partly in preparation for

that but partly as we move into winter

as well and to try and keep the sales

numbers up it isn't particularly unusual

for DJI to Discount their products 6

months in advance what I will tell you

is this as far as I'm aware 04 is not

imminent it is not around the corner so

don't think oh I'm not going to go for

this deal because I want to wait for 04

in one or two months time whilst no one

knows 100% for sure all of the noise

that I hear is that 04 is at least

February time before it's going to be

here so that's it be warned be careful

if you're using 03 with goggles 3 DJI

you need to fix this it is critical if

you have experienced this please let me

know in the comment section if you're

not having problems let me know in the

comment section if you're flying older

goggles and you've experienced this also

let me know cuz I'm particularly

interested in that especially the new

firmware combination in combination with

the goggles 3 now that's almost it from

me on this one but I just want to say if

you have found this video useful please

do consider checking out the links to

patreon as well as buying me a coffee in

the description I want to say a massive

thank you to all of my patrons for the

support you give also there will be

links down below to my Discord as well

and finally as I've said already if

you're having issues do let me know in

the comment section anyway that's it for

me stay safe I will speak to you soon