Der Skyline wird komplett Trockeneis gestrahlt
Summary
TLDRIn this video, the host enthusiastically shares the journey of revitalizing a Skyline project car, overcoming setbacks with determination. The focus is on upgrading the car's engine and aesthetic appeal. The process involves removing the engine, disassembling it, and sending it off for improvements, alongside beginning the painting process. A major cleaning challenge due to accumulated dirt and oil is tackled through an innovative dry ice blasting technique, introduced by a partner. This method efficiently cleans the engine bay, interior, and removes stubborn residues, significantly reducing manual labor and preparation time for painting. The video captures the transformation's excitement and the meticulous steps taken to enhance the car's performance and appearance.
Takeaways
- 🚗 The project focuses on taking a Skyline to the next level, including engine removal and disassembly for sending out, while also starting the painting process.
- 🔥 The vehicle is initially dirty and oily, with some rust spots needing attention, which the team plans to address.
- 🛠️ A unique cleaning method mentioned is dry ice blasting, which is utilized to clean various parts of the car, including the engine bay and interior, without damaging materials like rubber or cables.
- 👍 The video includes a partnership with a specialist in dry ice blasting, Johannes, who demonstrates the efficiency and effectiveness of this cleaning technique.
- 👓 The process not only cleans but also prepares the vehicle for further restoration steps, such as painting and epoxy coating.
- 💧 The dry ice blasting method proves to be a quick and thorough cleaning solution, saving significant manual labor and time.
- 👚 Johannes's work extends beyond the initial plan, cleaning the interior and even removing residues from protective mats and bitumen coating with the blasting technique.
- 💻 Following the cleaning, the vehicle is ready for immediate further treatment, including sanding, filler application, and painting.
- 🔧 Highlighted is the importance of prompt treatment of bare metal exposed by the cleaning process to prevent rust, leading to the application of epoxy primer.
- 👏 The script concludes with gratitude towards Johannes for his exceptional work and a teaser for upcoming project steps, including paint mixing and engine disassembly.
Q & A
What project is being discussed in the script?
-The script discusses a project involving the restoration and upgrade of a Skyline car, focusing on engine removal, cleaning, and repainting.
What specific technique is used for cleaning parts of the Skyline?
-Dry ice blasting (also referred to as ice blasting or using CO2) is used for cleaning the engine bay, interior, and removing old coatings and dirt without damaging the surfaces.
Why is dry ice blasting chosen as the cleaning method for the Skyline project?
-Dry ice blasting is chosen because it effectively cleans surfaces without causing damage to rubber, cables, or other sensitive parts, and it does not use water, which can lead to further complications.
What are some of the specific areas cleaned with dry ice blasting in the Skyline?
-The engine bay, interior remnants of mats, all the grinding dust, and areas smeared with bitumen were cleaned using dry ice blasting.
What is the outcome of using dry ice blasting on the Skyline project?
-The dry ice blasting significantly cleaned the car's parts, making them look almost new, saving a lot of manual cleaning time and effort.
Who is Johannes and what role does he play in the Skyline project?
-Johannes is from a company specializing in dry ice blasting. He plays a crucial role in the cleaning process of the Skyline project, using his expertise to clean various parts of the car.
What are some of the benefits mentioned about using dry ice blasting in automotive restoration?
-Benefits include not damaging sensitive parts like rubber and cables, the ability to clean hard-to-reach areas effectively, and the efficiency in removing tough coatings without water.
What other applications of dry ice blasting are mentioned in the script?
-Besides automotive restoration, dry ice blasting is used for cleaning house facades, removing graffiti, cleaning concrete surfaces, and timber frameworks.
How does the presenter plan to finish the Skyline's surfaces after cleaning?
-After cleaning, the plan is to prime the surfaces with epoxy and then paint them in the car's color.
What is the overall sentiment of the presenter towards the progress and results of the Skyline project?
-The presenter is highly enthusiastic and satisfied with the progress and results of the cleaning process, appreciating the efficiency and effectiveness of dry ice blasting in preparing the Skyline for further restoration steps.
Outlines
🚗 Starting the Skyline Project
The video begins with an energetic greeting and an introduction to the continuation of the Skyline project, emphasizing resilience against past setbacks. The narrator outlines the plan to take the vehicle to the next level by dismantling and sending off the engine for upgrades, alongside starting the paintwork. Due to the car's dirty and oily condition, with some rust spots needing attention, the narrator discusses an alternative to manual grinding until Easter - dry ice blasting, a method unfamiliar by name but promising in efficiency. A partnership with a specialist in dry ice blasting is introduced, aiming to clean various parts of the Skyline, including the engine bay, interior remnants of mats, and dust from prior sanding efforts. The process promises a clean base for repainting, starting with an epoxy layer before matching the car's original color.
🛠️ Transformative Cleaning with Dry Ice Blasting
This section showcases the dramatic transformation achieved through dry ice blasting, highlighting the method's efficiency in cleaning without damaging sensitive components like cables and rubber parts. The narrator marvels at the stark contrast between treated and untreated areas, noting significant time and effort savings compared to traditional cleaning methods. The process successfully cleans various parts, including the engine bay, transmission, and chassis seams, suggesting a method for improving seam appearance. The enthusiasm for the cleaning process extends to the interior, where adhesive residues from mats are removed, further saving time and labor. The narrator's excitement is palpable, with plans to extend the cleaning to the engine itself and eventually the entire car, praising the process's effectiveness and the specialist's skill.
🎉 Concluding with Impressive Results
The final paragraph wraps up the project, highlighting the significant labor and time savings achieved through dry ice blasting. The narrator expresses gratitude for the specialist's exceptional work, which made hard-to-reach areas like engine components and undercarriage parts look new again. Despite initial plans focusing on the engine bay, the scope expanded to include the interior and trunk, effectively removing all traces of bitumen and other residues. The comprehensive cleaning has prepared the car for further restoration steps, such as rust removal and repainting, setting a high standard for cleanliness and maintenance. The segment ends with anticipation for future projects, acknowledging the transformative impact of dry ice blasting on the Skyline project and the potential for its application in other restoration endeavors.
Mindmap
Keywords
💡Skyline Project
💡Dry Ice Blasting
💡Engine Disassembly
💡Painting
💡Rust Removal
💡Epoxy Coating
💡Bitumen Removal
💡Dust and Oil Clean-up
💡Motor Stand
💡Restoration Process
Highlights
Introduction to the new part of the Skyline project, emphasizing perseverance and upgrading the car to the next level.
The car is dirty and full of oil, with visible rust spots that need addressing before painting.
Introduction of a unique cleaning method: dry ice blasting (Eisstrahlen) for cleaning the engine bay, interior, and removing old coatings.
Partnering with a professional in dry ice blasting to work on the Skyline, including engine bay and interior cleaning.
Explanation of dry ice blasting process and its benefits, such as not damaging rubber or cables.
Showcasing the effectiveness of dry ice blasting in cleaning the engine and other parts without water or abrasives.
Immediate visual improvements seen in the engine bay, showcasing the difference between cleaned and uncleaned areas.
Exploration of using dry ice blasting for various cleaning tasks beyond cars, like building facades and graffiti removal.
Demonstration of removing stubborn bitumen mats from the car's interior using dry ice blasting.
Comparison of traditional cleaning methods versus dry ice blasting in terms of efficiency and effectiveness.
Completion of the engine cleaning with dry ice blasting, making it look almost new.
Moving on to clean the car's interior and trunk with dry ice, showing significant progress and cleanliness.
Addressing remaining areas with rust and bitumen, planning for their removal and cleaning.
Final thoughts on the effectiveness of dry ice blasting in saving a month of manual cleaning work.
Preview of the next steps in the project, including painting and engine disassembly.
Transcripts
[Musik]
ein wunderschön guten Morgen meine
Freunde und herzlich willkommen zu einem
neuen Teil am Skyline es geht fleißig
weiter wir lassen uns definitiv nicht
von den letzten Rückschlägen hier
irgendwie aufhalten wir sind wänner wir
ziehen durch und wie ihr wisst wollen
wir ja diesen Wagen auf das nächste
Level bringen Motor ist draußen Motor
wird zerlegt Motor wird eingeschickt und
in der Zeit müssen wir ja auch dann hier
anfangen zu lackieren Dings ist das
alles hier super dreckig voller Öl und
ja der sieht alles hier nicht so schön
aus das wollen wir wegaben so paar
Roststellen hier noch die wir wegmachen
müssen normalerweise ich könnte mich
jetzt hier hinstellen und ums Verrecken
bis Ostern des Schleifen aber es gibt
eine super Option und zwar
Trockeneisstrahlen Eisstrahlen ich keine
Ahnung wie der Bums heißt wir haben
heute einen coolen Partner am Start und
mit dem werden wir heute einige Sachen
am Skyline machen sowas wie den
Motorraum im Innenraum die Reste von un
unseren Matten und auch den ganzen
Schleifstaub denn ja hat der Vorbesitzer
ja Kofferraum mit mit bitum
eingeschmiert und beim Schleifen
verschmiert das alles und ich hätte es
gerne einmal blank dann schön mit Epoxid
auslackiert und dann in Wagenfarbe
deswegen wir legen direkt los lass wir
gerne ein Daumen nach oben da und wir
starten direkt mit dem weiteren Teil an
unseren Skyline
[Musik]
Projekt
[Musik]
[Applaus]
je je was ein Apparat scha mal her
eisreib gabot aus dreston City moin Was
geht
nam vergessen willst D vielleicht noch
mal vorstellen wer bist du und was
machst du natürlich ich bin der Johannes
von Eisstrahl und Baus scarbards ich
mache Eisstrahlen e jetzt nicht
gedacht ja ich stell es euch mal kurz
vor was man damit machen kann wir sind
heute bei MVE um seinen Motorraum sauber
zu machen wir können Kabel strahlen wir
können alles drum und dran Strahlen es
kaputt machen ohne Wasser das werden n
meine ersten Bedenken bei Strahlen denkt
man immer an sandstrahlen und da habe
ich schon selber sehr viel selber
Scheiße gebaut und er hat mir versichert
geht kein Gummi kaputt gehen keine Kabel
kaputt und das will er heute unter
Beweis stellen dass man hier bisschen
Eis reinpisst und dass es aussieht
wieder wie neu ja geiler scheiß ey ohne
Scheiß man kann mich man kann mich mit
allem faszinieren das mache ich jetzt
das erste Mal ich habe schon mal bei
Marvin gesehen aber das jetzt in
Reallife noch mal zu sehen das ist eine
ganz andere Nummer und du machst ja
quasi von Hausfassaden bis Graffiti
Entfernung Menschen hich nein Spaß
machst ja auch nur dein Job Betonflächen
reinigen Dachstühle komplett sichtholz
also können wir auch einfach mal hier
bei mir den Boden so sauber machen
einfach mal testen ob dein Boden mit
sauber Alter ich sehe dich schon sowas
von jede Woche antanzen weil ich immer
wieder was Neues finde zum sauber machen
geiler sch also ist ein cooler Job auf
jeden Fall dann würde ich sagen packen
wir das Zeug da rein einfach nur da Eis
rein wir haben ein kleines Gerät einmal
mit einer kleinen Menge Eis das Eis ist
Trockeneis das ist gefrorenes CO2 das
GEF oha okay verletze ich mich wenn ich
da so blank reinfasse das soll du nicht
ma okay -
78° ich habe das Verlangen da trotzdem
reinzugreifen Mutprobe es fängt dann an
zu oha ist aber lässig ist lässig ja ist
das auch das Zeug wo man diese
bitummatten rausmachen kann sollte man
probieren ja ah das habe ich schon
hinter mir das das da habe ich mich ganz
anders angestellt vielleicht kriegen wir
da auch noch irgendwie was hin dass wir
die Reste wegmachen ah du das
Zukunftsmusik ich würde sagen genug
gequatscht wir lassen den Mann hier mal
eine Runde zaubern aus dem alten Scheiß
den der Pole da fabriziert hat macht er
was neues let's go let's
[Musik]
go
[Musik]
ey ohne Scheiß ich bin ja richtig davon
fasziniert wie das ja funktioniert und
muss schon mal Props geben wir sind
keine 10 Minuten hier am machen und
schaut es euch mal an e Anlasser schon
fast sauber Lenkgetriebe alles hier an
der Spritzwand sieht man das schon
richtig gut den Unterschied zwischen was
schon gestrahlt worden ist und was nicht
also das kann doch hier nur eine sch
Shin pisskareare werden e wir machen
[Musik]
weiter
[Musik]
da ist er der Meister ey ohne Scheiß es
sieht wirklich sehr sehr wild aus also
um es euch mal zu zeigen ein Unterschied
wie Tag und Nacht ich weiß gar nicht was
ich euch zuerst zeigen soll Sch her hier
die ganze karosserienaht was ich damals
vorbeugend gemacht habe nach dem
Schweißen ist jetzt runter denn das
müssen wir mit 2K Epoxy zumachen und du
hast mir ein coolen Tipp gegeben dam das
schöner ist einfach Karosseriekleber
drauf und dann einfach ein Pinsel mit
Silikon Silikon genau langziehen und
dann soll das besser aussehen weil die
näte die ich da gemacht habe die sahen
wie von dem größten Alkoholiker aus also
das war schwierig aber schaut mal hier
alleine das sieht alles komplett wie neu
aus auch das Getriebe Spritzwand wir
sparen uns da damit mega viel Arbeit ich
hätte mich jetzt hingestellt mit
waschbenzinen Pinsel das sauber gemacht
hät schon eine Woche zwei gesessen und
es würde nicht annähernd so gut aussehen
und das Ergebnis spricht einfach für
sich wie jetzt hier alles einfach sauber
ist ja wir haben noch ein bisschen Eis
und du hast extrem Bock im Innenraum
geht's nämlich noch weiter haben schon
einen probesprüher gemacht wenn ihr euch
in sind hatten wir ja hier unsere Matten
drin und wir haben hier diese Klebereste
von den Matten und wenn wir dahinschauen
hat schon ganz gut funktioniert du lebst
D weiterhin aus reicht es aber dann noch
aus für Motor und den ganzen sagen wir
machen schnellüber dann machen wir
dieten und dann okay also doch erstmal
den Motor gut dann hängen wir kurz Motor
weil der soll ja auch noch schick
aussehen let's
[Musik]
[Musik]
go
[Musik]
ich sag euch ehrlich wir fehlen die
Worte guckt euch das mal an W motorist
wo ist der Riss im Block hab neuen Motor
schaut euch das mal an der ist wie neu
selbst die Lichtmaschine ne ich weiß
nicht wie es auf der Kamera rüberkmt
aber das ist jetzt alles wie neu ist das
krank ey ich komme echt nicht drauf klar
wie vor allem wie schnell und effizient
das geht ich meine klar zerlegen wir den
Motor aber es ist schön dass er schon
mal so sauber ist das gibt mir auf jeden
Fall mehr Motivation wenn der Motor dann
morgen auf den Motorständer fliegt und
wir den zerlegen dass er dann auch im
eingebauten Zustand so steht ich sag
euch ehrlich ich fange an Blut zu lecken
Lichtmaschine bald in Chrom und so diger
ich sag euch ehrlich ich habe mich voll
verändert seidem ich riss im Motorblock
habe du du kannst es kaum noch erwarten
ne du willst direkt weitermachen wie wir
schon gesagt haben jetzt der Innenraum
hier Alter einfach der ganze Skyline
komplett
[Musik]
eisgestrahlt
[Musik]
der Mann ist komplett am durchdrehen er
ich sage euch ehrlich mein Grinsen ist
größer schaut es euch an wir haben uns
so viel Arbeit gespart er hat selbst die
Matte hier in der Mitte rausbekommen das
ganze von dem bitum hier ist weg wir
müssen nichts sauber machen gar nichts
wir können direkt losschleifen um ja
auszulackieren direkt hat er auch noch
hier alles was mit Armatur brett alles
Kabelbaum auch sauber bekommen also
vorne ist hier ist und ja komm wir haben
Blut gelckt wir machen noch den
Kofferraum Weg wir haben gerade schon
mal reingehalten das geht easy runter
hier ist irgendwie so ein bitum Zeug vom
Vorbesitzer ist nicht so geil zum
Lackieren und wir wollen ja die Karre
clean haben deswegen machen wir das
jetzt auch noch weg und dann ist
komplette Karre hast du durchgezogen
vielen Dank und auf geht in die letzte
Etappe der auf dem seinen Instagram
jetzt da muss reinschallern wirklich
also ich denke mal bei nächsten
Projekten ich ich
alter ich liebe dich und du liebst mich
du hast mein Liebe gewonnen ich bin dein
Hauptpreis ich bin dein
[Musik]
Gewinn
[Musik]
also am Kofferraum ist es dann doch noch
mal ein bisschen sehr eskaliert war ein
sehr enger Raum es hat ja sehr gequallen
heißt ich kon immer so viel Film und wir
auch nichtmer so viel Eis deswegen
schaut das so aus hier war sogar noch
eine matte drin die ist jetzt ja wir
haben jetzt noch so hier drumherum
bisschen von dem bitum allerdings wurde
schon mal der Rand hier weggestrahlt das
denke ich mal kriegen wir schön hier mit
unserem guten polnischen abweizer ab den
wir schon mal für meine Felgen benutzt
haben und was soll ich euch sagen es ist
geisteskrank das ganze hat mir jetzt
bestimmt locker ein Monat Arbeit
abgenommen stell vor das alles jetzt
hier mit Waschbenzin und Aceton und
nitroversündung einfach hier sauber
gemacht und so ist jetzt einfach ready
wir müssen jetzt einfach nur anschleifen
nassen nassfüllern Farbe drauf und llak
und das hier vorne genauso es ist
einfach geisteskrank wie du abgeliefert
hast ey wirklich ohne Scheiß danke noch
mal es ist wow einfach nur geil also
eigentlich haben wir nur geplant
Motorraum zu machen aber selber das
Projekt so gefühlt h gesagt ne wir
müssen jetzt durchziehen das super
geworden e mega extrem also Leute alles
unten verlinkt falls ihr auch Interesse
habt ne du machst ja nicht nur Autos
haben wir schon gesagt du machst ja auch
Graffitis weg also ich könnte der Grund
sein warum du vielleicht eventuell meh
Geld verdienst bald von Boden werden wir
bestimmt auch noch mal machen den
bodenheißstrahlen am Alpina hätte ich
Dich auch gerne auf jeden Fall mit am
Start das wird ja auch noch mal so ein
richtig seriöses Projekt also werden wir
dich bestimmt noch mal auf den Kanal
sehen und falls ihr Interesse habt
schaut gerne mal in derchreibung vorbei
was das ganze kostet ich hätte jetzt
gerne eine Kugel in der Hand ich würde
euch sagen das ist individuell das ist
wie bei einer Lackierung das kommt
glaube ich drauf an wieder ist der
Zustand wie viel ist zu machen wie viel
brauchen wir davon und und und deswegen
vielleicht einfach mal den Kollegen
anschreiben und euch ein individuelles
Angebot einholen du bist ja ansätig in
Dresden also vielleicht interessant für
alle Leute in Sachsen du bist mobil sein
Gefährt ist am Stüssel du kommst überall
hin selbst in die Pol selbst in die
polenschanze du bist auch am Start
erstmal guten Tag ey mega mega mega geil
und ich mache jetzt erstmal Feierabend
komm bisschen klar auf meine
Glücksgefühle
e noch beim Zahnarzt nächste Woche
Weisheitszahn Zehen Verpiss so gar
keinen Bock drauf und dann geht's morgen
weiter wir machen mit dem epoxed hier
weiter das ganz wichtig denn wir haben
jetzt hier blankes Metall dass wir das
einmal ordentlich machen und dann ja
Lack anmischen Motorkran aufbauen Alter
wir haben so viel zu tun ich find's
richtig super dass du da bist al ich ma
gleich direkt zu meinem
Sklaven tschüss tschüss ich muss hier
raus also wir machen es doch nicht so
ich warte nicht bis morgen denn wir
haben wirklich hier blankes Blech das
will ich jetzt nicht so belassen das ist
frisch gestrahlt wir sollten es echt
nutzen auch wenn es kalt ist ich nach
angeschlagen bin und noch selber so viel
zu tun habe komm die halbe Stunde nehmen
wir uns noch Zeit ich habe schon unseren
Epoxy Primer angemischt ich setz mir die
Maske auf und wir lackieren direkt los
dass die Stellen jetzt mal geschlossen
sind und danach quatschen wir noch mal
wie es jetzt
[Musik]
weitergeht
[Musik]
da sind wir nun endlich fertig meine
Freunde es ist geisteskrank was einfach
h die letzten 48 Stunden passiert ist es
hat mich super weitergebracht auch noch
mal an dieser Stelle vielen vielen
lieben Dank an Eisstrahl und bauchervice
garbots aus Dresden der Mann hat
hier abgeräumt es ist super geil denn
überlegt mal in diesen ganzen Ecken der
wäre ich niemals rangekommen das war ja
alles voller Öl das Lenkgetriebe auch
das Getriebe schaut mal das glänzt alles
wieder überall da wäre ich niemals
rangekommen auch beim Schleifen wir
müssen dann auf jeden Fall einen kleinen
haftpromoter in die Ecken sprühen weil
da werden wir über all nicht rankommen
wie gesagt der ganze Dreck ist weg die
Vorderachse alles ist neu das
Lenkgetriebe das ist einfach nur krank
es war eigentlich nur ausgemacht dass
wir den Motorraum machen allerdings
hatte der Johannes so krass viel Bock er
hat mir direkt mein Lenkrad den
Kabelbaum alles gestrahlt im Innenraum
die ganzen Reste von den bitommatten
auch hier diese schon gerissene
bitommatte hat er auch noch weggemacht
die hier hinten haben wir gelassen die
haben noch super stark gehaftet das
haben wir so gelassen und und ansonsten
alles ist weg und auch vor allem hier
hinten im Kofferraum bin ich super froh
dass er das gemacht hat denn schaut mal
her wir haben h doch den einen oder
anderen ja Rostfleck das heißt wir
müssen auf jeden Fall hier noch eine
Rostentfernung machen den Rest hier was
an bitum da ist werde ich denke ich mal
mit unserem guten polnischen
felgenlackabweizer machen den wir schon
mal benutzt hatten für die Felgen ich
denke mal das Zeug ist so aggressiv dass
wir das hinkriegen also es ist halt
lackpistolenreiniger und das Zeug ist
super aggressiv ich denke mal damit
werden wir das alles richtig geil
hinkriegen ansonsten alle unsere
restlichen Roststellen die wir hatten
seht ihr ja hier schon in weiß alles ist
jetzt auch nun mit zwei komponenen
Epoxid gemacht und das wird dann auch
noch geschliffen und dann nassen
nassfüller blablabla das seht ihr dann
alles im nächsten Video ich mache mich
jetzt schon auf dem Weg zu meinem neuen
Partner wir werden den Lack anmischen
falls ihr das nicht passen wollt
Abonniert auf jeden Fall diesen Kanal
falls euch das hier gefallen hat gerne
einen Daumen nach oben da lassen und wir
sehen uns dann im nächsten Video wenn es
losgeht mit der Farbe dem Lackieren und
vor allem den Motor den müssen wir auch
noch zerlegen ey es ist so krank viel
Content am Start ich bin jeden Tag am
machen und ich hoffe ihr habt genauso
viel Spaß an dem skyl Projekt wie ich
bissin lasst euch gut gehen bis zum
nächsten Mal und
ciao
5.0 / 5 (0 votes)