HOW TO CLEAN A COMMERCIAL KITCHEN DEEP FRYER!

Summary

In this tutorial, Chef Triposi demonstrates how to properly clean a deep fryer for optimal performance. He walks viewers through the entire process, starting by disassembling the fryer and removing the used oil. Using a heavy-duty degreaser and hot water, he explains how to remove stubborn grease and residue. The process includes boiling water to clean the fryer and its components thoroughly. By the end, the fryer is sparkling clean and ready for use. Chef Triposi wraps up by thanking viewers for watching and encouraging them to like, subscribe, and comment.

Takeaways

• 😀 Step 1: Disassemble the deep fryer by removing all parts for cleaning.
• 😀 Step 2: Use a heavy-duty degreaser to spray and break down grease on fryer parts.
• 😀 Step 3: Empty the old oil into a container (e.g., soy sauce bucket) to discard properly.
• 😀 Step 4: Pre-spray the fryer with degreaser to remove dirty residues before adding water.
• 😀 Step 5: Fill the fryer with water and bring it to a boil to loosen hard oil and grime.
• 😀 Step 6: Let the water boil for about 30 minutes to clean grease buildup on fryer surfaces.
• 😀 Step 7: Clean all fryer parts separately, spraying and using soap with water for thorough cleaning.
• 😀 Step 8: Repeat the process on both sides of the fryer for even cleaning.
• 😀 Step 9: Check the bottom of the fryer for any remaining dirt or oil after boiling.
• 😀 Step 10: Once cleaned, the fryer should shine and be ready for use. Turn it on and set it to 350°F for cooking.

Q & A

What is the first step in cleaning a deep fryer according to the video?

The first step is to remove all the parts of the deep fryer.

What type of degreaser is used in the cleaning process?

A heavy-duty degreaser is used to clean the deep fryer.

How does the video suggest dealing with used oil from the fryer?

The used oil is drained into an empty bucket, which in this case is a bucket that previously contained soy sauce.

Why is it important to spray the fryer with degreaser before boiling water?

Spraying the fryer with degreaser helps remove the dirty buildup on the bottom before adding water and boiling.

How long should the water be boiled in the fryer for cleaning?

The water should be boiled for about 30 minutes to help clean the fryer.

What is the purpose of using hot water during the cleaning process?

Hot water helps clean the fryer by loosening and removing hard oil deposits on the sides of the fryer.

How does the video suggest cleaning the fryer parts?

The fryer parts are sprayed with degreaser and then washed with soap and water.

What should be done after cleaning the fryer parts?

After cleaning, the fryer should be checked to ensure all sides are shining and that the bottom is free from grease.

What temperature is the deep fryer set to after cleaning?

After cleaning, the fryer is turned on to 350°F.

How often does the video suggest changing the oil in the fryer?

The oil in the fryer should be changed once a week.