Easily Setup the Entina Tina2 Plus & First Print in Minutes #3dprinter
Summary
TLDR本视频展示了如何快速设置并使用Anycubic的Tina 2 Plus 3D打印机。从开箱到打印,整个过程简单易懂。视频中详细介绍了开箱内容,包括保修卡、电源适配器、SD卡读卡器等配件。随后,演示了如何安装打印材料、预热喷头、插入SD卡,并使用Kira切片软件进行打印设置。最终,成功打印出一个小型立方体模型,展示了Tina 2 Plus的易用性和打印效果。
Takeaways
- 📦 开箱体验:Tina 2 Plus 3D打印机的开箱过程简单,只需去除一些胶带即可准备就绪。
- 🔍 配件清单:包装内包括保修卡、一小卷PLA线材、电源适配器、紧凑的喷嘴、SD卡读卡器、转换器、几个六角扳手、电源线等。
- 📖 快速入门:提供了快速入门指南和安全警告,以及产品概述和规格说明。
- 🚫 第三方线材:明确指出禁止使用第三方线材,因为每种线材需要不同的温度设置,且潮湿或多尘的线材可能导致堵塞。
- 🔧 组装简便:只需移除气泡包装和胶带,卸下顶部螺丝和贴纸,即可轻松组装。
- 🔌 电源连接:电源适配器直接插入打印机,操作简单。
- ⏱️ 快速预热:打印机的喷嘴预热速度快,适合快速开始打印。
- 💾 SD卡使用:通过SD卡读取器插入SD卡,方便将打印文件传输到打印机。
- 🖥️ 切片软件:推荐使用Kira软件进行切片,该软件免费且易于使用。
- 🎉 成功首印:使用推荐的小型立方体模型进行首次打印,确保了打印的成功和快速。
- 🛒 购买信息:Tina 2 Plus 3D打印机可在亚马逊网站购买,视频描述中提供了链接。
Q & A
Tina 2 Plus 3D打印机是由哪家公司生产的?
-Tina 2 Plus 3D打印机是由Anycubic公司生产的。
Tina 2 Plus 3D打印机的包装盒内包含了哪些配件?
-包装盒内包含了保修卡、一小卷PLA线材、电源适配器、紧凑的喷嘴、SD卡读卡器、用于PC的转换器SD卡、几个六角扳手、电源线以及Tina 2 Plus 3D打印机本身。
Tina 2 Plus 3D打印机支持哪些类型的线材?
-Tina 2 Plus 3D打印机支持PLA、TPU和PETG类型的线材。
使用第三方线材是否被Tina 2 Plus 3D打印机所允许?
-根据说明书,使用第三方线材是被禁止的。
Tina 2 Plus 3D打印机的快速开始指南中提到了哪些安全警告?
-快速开始指南中提到了检查所有安全警告,但具体的安全警告内容在脚本中没有详细说明。
如何正确安装Tina 2 Plus 3D打印机的线材?
-首先需要剪掉线材的多余部分使其更直,然后从打印机底部插入线材,并通过挤压开始线材的进给。
Tina 2 Plus 3D打印机的电源适配器如何连接?
-电源适配器直接插入打印机上的相应插口。
如何将模型文件传输到Tina 2 Plus 3D打印机?
-首先需要将模型文件保存到TF卡上,然后将TF卡插入打印机的SD卡槽中。
在进行3D打印之前,需要对Tina 2 Plus 3D打印机进行哪些设置?
-需要设置Z轴偏移量,以确保打印平台与喷头之间的距离合适。
Tina 2 Plus 3D打印机的首次打印推荐使用哪个模型文件?
-推荐使用一个简单的立方体模型文件,可以在HL modtech的网站上下载。
如何调整Tina 2 Plus 3D打印机的打印参数?
-可以使用切片软件Kira进行参数调整,包括打印温度、打印速度、冷却设置等。
Outlines
😎 开箱体验:Tina 2 Plus 3D打印机
本段介绍了Tina 2 Plus 3D打印机的开箱过程。首先检查了包装盒的完整性,随后展示了包装内的物品,包括保修卡、一小卷PLA线材、电源适配器、SD卡读卡器、六角扳手、电源线和3D打印机本身。接着,按照快速入门指南的指示,移除了打印机上的保护膜和贴纸,并展示了如何安装线材和设置打印机。特别提到了使用Kira切片软件进行设置,以及如何将文件保存到SD卡并准备打印。
🛠 3D打印设置与测试
本段描述了如何设置3D打印机并进行首次打印测试。首先,调整了打印床的水平,并设置了Z轴偏移。然后,通过SD卡读取器将切片后的文件传输到打印机中,并选择了一个简单的立方体模型进行打印。在打印设置中,调整了打印温度、打印速度和冷却设置,并选择了不使用底板而使用裙边。打印过程中,作者提到了使用Kira切片软件的便利性,并展示了打印出的小型立方体模型,证明了打印机的性能和易用性。
Mindmap
Keywords
💡3D打印机
💡Tina 2 Plus
💡PLA
💡切片软件
💡挤出机
💡SD卡
💡Z轴偏移
💡打印速度
💡冷却风扇
💡裙边
💡Ultimaker
Highlights
介绍了一款可以单手举起的3D打印机——Anycubic Photon Mono。
开箱展示了包括保修卡、微型丝材、电源适配器、紧凑型喷嘴、SD卡读卡器等在内的配件。
强调了检查快速入门指南和安全警告的重要性。
说明了打印机支持PLA、TPU和PETG丝材,但禁止使用第三方丝材。
提供了打印机的规格和推荐的切片软件Kira。
演示了如何移除打印机上的保护膜和贴纸。
展示了如何安装和固定挤出机的顶贴纸。
介绍了如何连接电源适配器并插入SD卡。
展示了如何加热喷嘴并开始挤出丝材。
介绍了如何使用Kira软件准备打印文件。
展示了如何将文件保存到SD卡并准备在打印机上打印。
说明了如何设置Z轴偏移以确保打印质量。
展示了如何从SD卡选择文件并开始打印。
展示了打印出的小型立方体模型。
总结了使用Anycubic Photon Mono的体验,强调了其简单易用的特点。
提供了关于如何获取更多打印机信息的指引。
鼓励观众订阅频道并开启通知,以便第一时间获取新视频。
Transcripts
Friends check it out a 3D printer you
can hold in one arm it is the Tina 2
plus from antina I'm going to test it
out so let's get cracking all right so
let's start with what is in the Box seal
was not
broken Inside the Box we've got a
warranty we'll check that out in a
minute we've got a tiny par of
filament the power brick a compact
nozzle paste SD card reader for your PC
or a converter SD card couple of hex
wrenches a power
cable and this put this on its side and
it slides out pretty darn
easy stand that back up notice it is
taped around the side and let's separate
the
carefully to get
access to the
Tina and there it is the antina Tina 2
plus of course step one is to check the
quick start guide make sure you double
check all the safety warnings of course
those are the accessories they give us
the product overview if we move on down
here you can see the specifications
slicing software webuilder Kira Kiri
also the filament types it does use pla
TPU and petg it does specify over here
on the side the use of thirdparty
filaments is prohibited each disc AFF
filament requires a different
temperature please adjust to the best
also if it's damper Dusty it will cause
clogging please do not use it simple
steps get rid of the bubble wrap or the
foam peel off the tape near the lead
screw and remove that top
sticker that's easy
peasy I'm going to easily cut this tape
right over
here which makes it easier to
remove and snake it around a few times
to get it peeled out let's get in here
remove this shaft coupling shell it just
spins out the back
of course next up is this top sticker so
that tip is peeled off we do have to
attach this to the extruder that is done
and then check this out you can pull out
the filament holder how cool is that all
right everybody next up is the power
brick and it simply plugs in right here
one interesting feature onoff button is
right there powered
on the included filament is 1.75 5 m pla
180 to
210 I'm going to snip off this so it's a
little
straighter and then it feeds from
underneath and let's hit
next nozzle is heating up notice that is
quite fast there is 210 so now I've got
the filament in I'm going to squeeze and
just get it
started it is is feeding I can feel it
over here as I hold the Reel and right
now we can hit continue because it is
finished next step is to insert the TF
card I have just snagged it from the
protective case they gave us a little
picture showing that the little edges go
this
way and Bingo and it goes now I can hit
next it is rebooting first time letting
you see the Tina 2s plus friends I've
quickly bounced out to the HL modtech
web page and I'm on the 3D printers tab
for my first print I always like to use
this Cube file if you don't have it you
can download it right there we are going
to use Kira for this project I'm going
to quickly switch to all apps go down to
ultimaker and I want Kira 5.8 it is a
totally free download when it launches
it'll look similar to this I'm going to
click on this down arrow and we are
going going to choose add a 3D printer
it is a non ultimaker printer we're
going to choose the non networked
devices and if you scroll down we can
find the Ana and the Tina 2s and simply
hit add I'm going to put the word plus
out here just to make it more
clean Bingo that is our printer I'm
going to quickly add that file by
clicking up here you'll have to look for
wherever you downloaded in it extracted
that file I'm going to Simply type 1 C
which is how I named it one Cube because
it is a cenim cube and doubleclick to
launch it when it loads you can
rightclick and drag to look at it from
every angle it is a super simple print
but it is a great way to have success as
you can see it's only going to take
about 7 minutes while using the draft
settings we are printing with pla I'm
going to bump up this number number to
215 based on what they showed on that
page I'm going to do a build plate of 50
I'm going to keep the print speed at 40
cooling will be on I do not want any
raft instead I would rather have skirt I
like to do five lines of
skirt and I'm going to push those out 10
mm from the project I'm going to quickly
insert the SD card in that little
reader as you can see see the card pops
up and now over here I can choose save
to removable dis with it saved I'm going
to eject it and let's head over to the
3D printer so step one for me is going
to be to set my Z offset we are going to
scroll down and we're going to click on
the control Choice once we get there we
press it in and we're going to move to
probe Z offset once again when you get
it down there simply press the button
I've sped this up with video editing but
once we get in there I have found -2 is
the offset that works best with my
machine this may require a little bit of
guess and check on your end with that
complete you can see I've got that SD
card inserted we're going to move down
to print from TF find that one Cube and
press the button and choose print to get
it started
[Music]
and after about 8 minutes check it out a
fantastic tiny Cube how cool is that all
right friends so let's wrap up the
experience with the Tina 2s first love
the outof thee boox experience it is so
simple to unpack remove some tape and
bingo you're ready to get that bed set
and do your first print now I like to
use Kira they mention on the box that
you should use their version of cira I
found that the profile was already built
in and I always love using the updated
steps of course I always recommend using
that tiny Cube that you can find on my
website and download it is a fantastic
tool for getting that first print done
successfully on the SD card there are
Prints but the shortest one is more than
20 minutes so that's just more time
waiting for you to have your first
successful print if you're interested in
more information about this printer it
can be found on amazon.com of course if
you check the description of this video
I will provide a link for you of course
friends make sure you stay tuned cuz
there will be more videos to come and if
you enjoyed the video please give it a
like please also hit that share button
so more people can learn about HL
modtech of course friends J absolutely
make my day if you take time to leave a
comment down below and if you haven't
subscribed yet what are you waiting for
smash that subscribe button and last but
not least hit that notification Bell so
you'll be the first to know when there's
a brand new video from me HL modtech
thanks for watching have a great day
[Music]
ooh la la la la
ooh la la
Voir Plus de Vidéos Connexes
3D printing made easy with the Tina2 PLUS from WEEFUN!!
Free Tinkercad Filament Adapter & Generic PLA Entina Tina2 Plus Tips
UNBOXING ENTINA 3D printer Tina2S !@ENTINA3D
SO EASY! Tina2S 3D Printer Review, Setup and Test
The Entina Tina2S 3D Printer is so tiny! #3DPrinting #Entina #Tina2S #Polymaker
Tina2 Plus 3D printer by WEEFUN
5.0 / 5 (0 votes)