RED FLASHING LIGHT! HOW TO FIX YOUR HOVERBOARD

Summary

In this episode of the Davi train, the host shares a personal experience with a hoverboard's 'red flashing light of death.' After a frustrating attempt to resolve the issue with the seller and Amazon, he discovers a simple solution: calibrating the device. The video provides a step-by-step guide on how to level the hoverboard, press the on/off button for five seconds to initiate calibration, and observe the light pattern change. The host emphasizes the lack of information on hoverboard repairs, especially those from China, and invites viewers to share their interests for future content.

Takeaways

• 🔴 The video is about fixing a red flashing light issue on a hoverboard.
• 🛴 The problem started three weeks ago when the hoverboard wouldn't balance and had a red light flashing.
• 😫 The creator was initially unable to find a solution or instructions online for fixing the issue.
• 🛒 The hoverboard was purchased from Amazon through a different seller, which initiated a claim process.
• 💻 The seller was unresponsive, leading to a drawn-out communication process with Amazon.
• 🔄 The solution turned out to be a calibration process for the hoverboard.
• 🔘 The calibration process involves only the on/off switch and requires the hoverboard to be level.
• ⚖️ The hoverboard's wheels must be evenly rotated and level with each other.
• 🕒 Holding the on/off button for about five seconds initiates the calibration, indicated by flashing lights.
• 💡 The calibration is complete when the light pattern changes, and the lights flash evenly.
• 👍 After calibration, the hoverboard is ready to use once it's turned back on.
• 📚 The video creator notes the lack of information in the instruction manual and the need for more knowledge sharing about hoverboard repairs.

Q & A

What issue did Davi encounter with his hoverboard?

Davi experienced a red flashing light on his hoverboard, which is referred to as the 'red flashing light of death,' causing the hoverboard to not function properly.

Where did Davi purchase his hoverboard?

Davi bought his hoverboard on Amazon from a different seller.

What was Davi's initial reaction to the red flashing light issue?

Davi was initially freaking out because he couldn't figure out how to fix the issue and there was limited information available online for repairs.

What steps did Davi take to address the issue with the seller?

Davi started emailing the seller and initiated a claim process with Amazon.

How long did it take for Davi to hear back from the seller?

Davi described the process as a long, drawn-out one, with emails going back and forth before he finally got a response.

What was the solution provided by the seller to fix the red flashing light issue?

The seller informed Davi that he needed to calibrate the hoverboard to fix the issue.

What is the only button needed to calibrate the hoverboard according to Davi's video?

The only button needed for calibration is the on/off switch.

How did Davi ensure the hoverboard was level before calibration?

Davi made sure the hoverboard was completely level and that the wheels were evenly rotated, ensuring they were exactly even with each other.

Can you describe the calibration process as shown in Davi's video?

To calibrate, hold the hoverboard level, press and hold the on/off button for about five seconds until the light pattern changes, indicating the calibration is complete. Then, turn it off and on again to use it.

Why did Davi create this video?

Davi created the video because there was not much information available online on fixing hoverboards, and he wanted to share his solution with others who might face the same issue.

What did Davi mention about the hoverboard's origin and instruction manual?

Davi mentioned that the hoverboards come from China and the instruction manuals are quite simple, lacking information on calibration.

How does Davi conclude the video?

Davi concludes by inviting viewers to comment on what other types of videos they would like to see and thanks them for watching, promising to see them in the next video.