壊れたテスターを修理 AstroAI 6000カウント
Summary
TLDRIn this engaging video, the host delves into the world of electrical testing, starting with their frustrations with a malfunctioning tester, which predominantly fails in resistance measurements. After enduring erratic readings and multiple battery replacements, they decide to dissect the faulty device for a closer look. They also compare it with a newly purchased model, highlighting slight changes in design and specifications. Through a detailed teardown, cleaning, and reassembly process, they explore potential causes for the device's erratic behavior, ultimately improving its performance with simple maintenance. This hands-on troubleshooting guide not only showcases the importance of regular equipment care but also provides valuable insights into the inner workings of electrical testers.
Takeaways
- 💻 The presenter is discussing the performance issues with a previously purchased tester, which had been malfunctioning and showing erratic resistance measurements.
- 🔋 A new tester model, DM6000AR, was purchased to replace the malfunctioning one, highlighting a possible model change from the old WH5000A model.
- 🛠️ The video includes a teardown of the old tester to diagnose and potentially fix the issues, indicating a hands-on troubleshooting approach.
- 👨🔧 The presenter has used the old tester for over four and a half years, suggesting a decent lifespan for such a device considering its price point.
- 🔧 Differences between the old and new tester models are noted, including changes in color codes for resistance measurement and an increase in current measurement capability.
- 📱 The new tester comes with a clearer LCD and improved test leads, suggesting enhancements in usability and accuracy.
- 🔨 Maintenance, such as cleaning and replacing grease, was performed on the old tester, showcasing the importance of regular upkeep for electronic tools.
- 🔌 The presenter successfully repairs the old tester by cleaning its contact points, thereby restoring its functionality without needing to replace internal components.
- 🌐 The video also touches on the importance of choosing the right tester for DIY projects, comparing features and prices of different models available on the market.
- 📚 The presenter mentions a 3-year warranty for the new tester and suggests that the old tester's issues were mainly due to wear and lack of maintenance, not a fundamental flaw in design.
Q & A
What was the issue with the tester?
-The tester was giving inconsistent and inaccurate resistance readings. The resistance values would fluctuate and change erratically.
How long had the tester been used?
-The tester had been used for 4 and a half years.
What was tried initially to fix the tester?
-The batteries were replaced multiple times, about 5 times, in an attempt to fix the inconsistent readings.
What was the hypothesis for the cause of the issue?
-The speculated cause was either a bad capacitor or dirty/worn contacts.
What was done to try and fix the tester?
-The case was opened, the contacts were cleaned, contact lubricant was re-applied, and its operation was tested.
What was the actual cause of the issue?
-Dirty/worn contacts were the cause. Cleaning the contacts and re-lubricating fixed the inconsistent readings.
What model tester was purchased to repair the old one?
-A DM6000AR model tester was purchased, very similar to the original WH5000A model.
What were the key steps in disassembling the tester?
-Removing screws, prying apart the case, disconnecting wire connectors, removing the display, circuit boards, etc.
What lubricant was used on the contacts?
-Contact lubricant grease was used after cleaning the contacts.
What was done to quiet the tester?
-Acoustic foam was added to dampen the beeping noise.
Outlines
😀 Title 1
Detailed summary 1
😀 Title 2
Detailed summary 2
😀 Title 3
Detailed summary 3
😀 Title 4
Detailed summary 4
😀 Title 5
Detailed summary 5
Mindmap
Keywords
💡Tester
💡Resistance Measurement
💡Model Change
💡Disassembly
💡Maintenance
💡Electrical Contact Points
💡Capacitor
💡Grease Application
💡Troubleshooting
💡User Experience
Highlights
The discussion covers innovative methods for analyzing complex datasets using machine learning techniques.
Dr. Smith explains how their new neural network architecture achieves state-of-the-art accuracy on image classification tasks.
The presenters highlight the theoretical contributions of their work, including new approaches to regularization and optimization.
Notable applications of the research are discussed, such as potential uses in medical diagnosis and autonomous vehicles.
Dr. Lee emphasizes the practical impact of their techniques for processing natural language data.
Key innovations in data preprocessing and feature extraction are covered.
The presenters outline potential future work building on their current advances in deep learning.
Dr. Chen summarizes the main strengths of their probabilistic approach compared to prior methods.
Insights are provided into how the research enables new capabilities in areas like computer vision and speech recognition.
Challenges and limitations related to computational complexity and model interpretability are acknowledged.
Exciting new opportunities to apply the technology in autonomous systems are discussed.
The presenters highlight key collaborations and partnerships that enabled their interdisciplinary research.
Insights are shared into how theoretical advances were translated into practical algorithmic improvements.
The discussion emphasizes the team's commitment to open source sharing of data, code and models.
Overall significance of pushing forward the state-of-the-art in machine learning is highlighted.
Transcripts
どうもくです本日はこちらじゃんテスター
いつものテスター前回の動画ダイソだった
んですけどめちゃくちゃ調子が悪い
お兄さんテスターってここの抵抗のところ
ばっかり使うんすよもう99%この抵抗の
ところしか使わないんですけど
めちゃくちゃ調子悪くてちょっとアップに
するね段落させても
ねほら22オムでこの状態だと同通テスト
して
も今日はなるね今はね23オムとか出た
けど50オムとか60オムとかなんかそう
いう数字出ちゃうんすよなんかね調子が
良かったり悪かっ
たりほら短絡しのに200オム出たから
ねこんな状態ひどくないで同通モードに
するとあ一応今はなるねもう何台ぐらい
抵抗出たりするんですよで最初の頃はね
電池がないのかなとかやって電池をね何回
も何回も交換したりとかしてたんだけど
電池交換5回ぐらいやってねあこれ壊れ
てんなって気づいて今回ちょっとこれ分解
して中身見てみようと思いますで中開けて
調べるのにテスターが必要じゃないですか
買っちゃいましたでパッケージ見たらね
DM6000ARって書いてあってね微妙
にモデルチェンジしてるかもしんないこれ
はねWH5000Aなんですよねテスター
を調べるためにテスターを買いましたはい
まだ未封あやっぱりDM6000
AR外は一緒だね違いはまここに書いて
ある型番が違うのとメーカーロゴの
フォントが変わってるねあとレンジ表記の
色例えばこの抵抗のところこっちの古い
やつは白だけど新しいやつは黄色になっ
てるね微妙に違う電流系のところも400
MAMAで新しいやつは500MAMAに
なってるねなんか微妙に変わってるただね
中身は変わってないと思うんだあ説明書が
日本語になったかな多分前のやつ日本語で
書かれてなかったと思う多分変わってない
と思うよあアストロAI3年保証だって
ちなみにこの古いテスターお兄さん4年半
使ってましたまさすがに寿命なのかなって
いう感じはしますけど3000円ぐらいで
買えるからねこれねはいということで古い
テスター分解して中身どういう風になっ
てんのかね見てきましょうあ新しいやつも
ちょっと1回開けよう
かうん新しいのやっぱいいねもう色が
分かるかな赤いこっちもオレンジになっ
ちゃってるからねこのマグネットはいら
ないですあ文字もやっぱはっきりしてるね
液晶も綺麗になってるテストリードも買い
まし
たどうしてもね細いやつが使いたくてこれ
を反落させるとこれ新しい方ね素晴らしい
0.4A出るこっちのテストリード使おう
か古い方7オーム今日は機嫌いいねそう
短絡で8オム以下だったらまあなんとなく
使えるんだけど20とか30とか出ちゃう
とねもうわけがわかんなくて本当困ってた
んですよねちなみに最初の抵抗値が増えて
ても0オム設定すればいいじゃんって思う
と思うんですけどまそれで使えるんです
けどま0オムで短絡で8オム出ても0設定
すればいいじゃんとこれかなこれでできる
んだけど今測定値で0.マイナスそうほぼ
ほぼ0オム出てますけどこんな感じね
使えるんだけどじゃ同通テストしますよて
言って
切り替えるじゃないです
かまた戻っちゃうんだよねこれで繋いでも
ほら8オムなっちゃったでしょ切り替える
たびに0オム設定すれば使えるは使えるよ
でももうそんなん使いたくないじゃんそう
いうことです使えなくはないだけど
すっげえ面倒っていうそんな感じですね
じゃあテスターばらしてみ
ますはいやっていきましょうテスター
ばらすのは初めてです
ねちなみさっきも言いましたけど4年半
使ってますんでねこのテスタの耐久性とか
そういったところに不満は一切ございませ
ん久々にAmazonの販売ページ見たら
めちゃくちゃ売れてるねモ太郎電池
[音楽]
ね
おなんか嫌がってるねあ先ヒューズ抜か
なきゃいけないん
だあなんか割れそう上はまってるよこれ
えー接着はしてないと思うけどめっちゃ
はまってるよ割れると思うこれあ来た来た
来たたあ上に爪がありまし
た
はい来た来
た
[音楽]
多分別メーカーとかでここになんか端子
つけられるんじゃないここにほら配線して
あるもんなんかのインターフェースがここ
につくんじゃ
ない固定ネジに関しては
[音楽]
12345678
はいそう前の動画でねここの接触不良が
あると調子悪くなりますよみたいな
コメントがあったんですよねそれはあり
得るよねまでも接点は全然悪くなってない
ねちょっとアップにします
ねこんな感じ全然削れてないす
ね
綺麗なもんだよねここは電池のケーブルだ
ねまボタンファミコンボタンだね液晶が
もうこれゲームウォッチだ
よゲームウォッチで見たやつだねこれ
ねこのゴムのやつこのバックライトに関し
てはねいらないっちゃいらないんだよね
まあまあ一応つけときますけど液晶外さ
ないと何も作業できないよ
ね一応ね液晶のこのゴムの位置をね
マッキーで印しけました接着剤かなこ
しっかりついてるうん結構しっかりつい
てんな取らないでやるそうお兄さんが
怪しいなと思ってたのはこういう
コンデンサかなと思ったんですよねなぜか
と言うと抵抗測る時って電気かけるじゃ
ないですかその電気が安定しなくなっ
ちゃったのかなと思ったんすよコンデンサ
が調子悪いとかねそういう理由でこの辺は
抵抗だ
ねハンダ付け
めっちゃ綺麗にされてるバイパスに使われ
てそうなのはこのC7とかこのC2とかC
4とかバイパスに使ってるかもしんないね
どうしようかとりあえずここの接点掃除し
て点検してみるとりあえず一応お兄さんの
本命はコンデンサ交換なんですけどまず
掃除してみよっかでこれはね
エレクトロニッククリーナー
ね
これで多分もう完全に綺麗でしょあと
こっち
ねあなるほどねここガチャガチャ
がバネと玉だこれバネね玉がこう乗っかっ
ててここの溝でガチャガチャガチャだ
グリスは結構汚くなってるま別にグリスが
汚くなってても別に構わないんだけどうん
グリス固まってる
ねうんグリスはねだいぶ汚い
こういうプラスチックに最適なグリスって
何だろうねお兄さんいつもシリコングリス
使っちゃうけどま確かにこのグリスが接点
保護しそうなグリスではないのでこれが
回り込んだら接点不良は起きると思うよま
とりあえず汚いのは取れたかなまそんなに
神経質になる必要はないと思うんだ
けどあ接点が落ちた
これ落ちたよあなるほどねはまってるだけ
なん
[音楽]
だ
へえ一応バネになってるApple
Watchの修理やってからこの
ちっちゃいバネがなんかちょっとトラウマ
なんですよねまさすがに4年も使ってれば
ねグリスも固くなるよねで使うグリスは
もちろんこちらタミ接点グリスこれでしょ
これ何グリスかわかんないんだよね成分
書いてないからあいやちょっと待って
こっち側掃除してなかっ
たいや接点グリスじゃない方がいいのかな
接点復活スプレーでやるべきだったか
[音楽]
なうんあとこっちもね設にしようと思い
[音楽]
ますこれなら流れ出てもね多分大丈夫なん
[音楽]
[音楽]
で一応端子側も塗ったんですけどこっちも
軽く伸ばしときます
ねはまらん結構めんどくせえか
[拍手]
もこの液晶の部分がね不安定なのですげえ
やりづらいあら動か
ないなん
で
なんか安っぽくなった
よカチャカチャになっちゃったダイヤルの
手応えが超安っぽくなってるこれ組み立て
難しいよ
なんかあやっぱ鉄球がずれちゃう鉄球が
ずれて
ますこんな感じにしときゃいいのかな最初
こっちのバネの上にボール置いたんだけど
ずれて
た
ま確実にずれるよね多分これで合ってる
はずなんだよね深いとこまではまるん
でただこの
まま固定するのがね至難の技
ですねこうやって液晶もずれてくるし
すごくやだめっちゃ力で挟み
つつねじ止めしなきゃいけ
ない
結構大変ですよ
これ手離したら終わるん
であいいねいい
ねいい感じですここをね固定したい
もしくは取りたいとりあえず現状はこの
真ん中のところダイヤルの接点を洗浄して
接点グリスを入れ直しただけちょっと手
洗ってくんねこの状態で電池つけちゃうね
[音楽]
はい反射して見えないかはい行きます
[音楽]
ほい
[音楽]
おすっげえいいんだ
[音楽]
けどすごくねえめちゃめちゃいいんですが
あらちょっと待ってねもう1回
めちゃめちゃいい
ぞあめっちゃいいじゃん治っちったよ
テスター買った意味ねまいいか皆さん
すごい早いんですがグッドボタンチャンス
ですありがとうございますここの
クリーニングだけですやったのはい
むちゃくちゃ調子良くなった最高やでやて
ちゃおう一応ここも掃除しとこう
かまたまにはねこうやってすんなりいって
ほしいよ
ねただ作業性はすっげえ悪い
よはまんねえ
しおはっ
[音楽]
た修理というよりはメンテですねこれは
[音楽]
はいヒューズ入れ
[音楽]
て
[音楽]
このカバーのカラーバリエーションあっ
たらもっと売そうだよ
ねお兄さん的にはこのコンと赤の
組み合わせが超かっこいいと思ってそれが
良くて買ったんだけどね
あけ忘れ
たちょっと今のなし今のは
[音楽]
なしか普は使い込まれてるから使い込まれ
てないやつを1番左に
[音楽]
しよう電流系とか使わないから
[音楽]
ね組み立てが大変これいやでも掃除だけで
こんな良くなるとは思わなかっ
たなんかきみが気になるな筐体の歪みは
もうしょうがないんだけどプラスチック
同士がこすれてギコギコ音がするのは
ちょっと嫌ですねこれはもうそれこそ
グリスを塗れば治ると思うんでここの
ギシギシ
そうね筐体のさますっげえ細かい話だ
けどここのリブあるじゃないですか全集に
渡ってこうなってるんだけどそれが
ちゃんとここにはまるようになってんです
よで閉じた時に少しこう何筐体が100%
ではまりきらないじゃないですか大体で
グって押すとプラスチック同士が多少動く
んだけどその時にここが擦れてギギギギ
言うんですよそれが嫌だったんでもう1回
開けましたなのでちょっとグリス入れ
ましょ本当はねあの薄い隙間埋めテープ
入れてあげたいんだけど薄いのがないので
グリスにしますあとこのビープ音が結構
うるさいんでま蓋しちゃってもいいんだ
けど蓋するよりはちょうどこの辺り吸音剤
を貼ってあげようと思いますちょうどこの
右上なん
[音楽]
でうんこんな感じでいいすね多分ビープ
オンがちょっと上品な感じになると思い
ますあとグリスねなのでここにすく塗っ
とき
[音楽]
ます
[音楽]
ま全部溝の中に入るんでねグリースが外に
はみ出てくることはないと思い
[音楽]
ますお狙い通りプラスチックのがなくなり
ました
ねまあとここも使わないんだけどここの
こすれるところもねちょっとグリス入れ
とき
ますおおいい
感じ滑らかになります
ね
ああ中に埃が結構入ってんなもういいよ
とことんやる
よこっちは誇りついてない
[音楽]
なうんこっちだ
[音楽]
ね
このバックライトがね正しい位置に来ない
とはまんないんす
[音楽]
よあとこれ
[音楽]
ね結構大変だねこれ埃りっぽいゴミ屋敷で
はちょっと難しい
[音楽]
ね
よしなんかすっげえ手間取ったけど最後
テサできましたじゃもう1回動作チェック
やっていきましょうはいどチェックやって
きましょうもうどっちが新品か分かりませ
んね
ねわかんないよね
うん音は大して変わん
ないいい感じですね
こっち新品
ねうんテストリードシードで0.1とかま
1以下の抵抗値でればいいかなと思って
ますいいね0.2ちょ抵抗測ってみ
ましょうコアの1.2kg
1.20で出ましたねこっちはうんいい
感じですねあとコンデンサ10マイクロ
ファラド
11.4出てますね
うん
スターバックスですからねおしゃれやね
トフィのような香ばしさと豊かな風味
らしいですちなみにこのハウスブレンドて
書いてあるインスタントコーヒーを飲んだ
ことがある気がする違ったかなおしゃれ
ちなみに今回のテスター種類なんですけど
コメントでねこんなコメントがありました
これ明日のお兄さんが合成してくれるはず
たまにいるんすよこういう予言者みたいな
人がまお兄さんの想ではコンデンサ不良
だったんですけどこの方はね接触不良って
いうコメントで指摘してたんですけど
こちらの方の正解でしたねお名前ビスコさ
んって書いてありましたありがとうござい
ますおかげでお兄さんのテスタが治りまし
たでこの動画ねサブチャンネルにアップ
しようかなと思ったんですけどこの
テスターお兄さんのおすめ工具にも入っ
てるんですよストリートジャンカ協会の
ホームページにお兄さんの使ってる工具
ページがあるんですけどそこで紹介して
ますで結構たくさんの方購入されてる
みたいなんで同じような症状になった時に
ねこの動画役立つんじゃないかなと思って
メインチャンネルにアップしようと思い
ますちなみにこのテスターの気に入ってる
ところはかっこいいところですあと多機能
精度がどうのこうのとかそういったのはね
求めてないし分かりません買った理由は多
機能でかっこよくて安いそれだけですま
色々オプションもついてて熱電通で温度と
かも測れるんでヒートガンで遊ぶ時とかね
なかなかいいんじゃないかなと思います
じゃスタバのハウスブレンドいただき
[音楽]
ますうん美味しいすねちょうどいい苦で
今回ね新しくまテスタ同じもの買っちゃっ
たんですけど何買うか結構迷ったんすよで
どんなのあるのかなって調べたりとかして
でやっぱ安て多能だとこれ3700ぐらい
かな安いタイミングだ3200ぐらいまで
値下がるみたいなんでま急いでない方その
タイミング狙ってもいいかもしれないです
ねで精度云々んていうのが気になる方はね
フルークの101っていうやつが
6000円ぐらいで売ってるっぽい多能で
はない温度測ったりとかまそういうのは
できないんだけどま精度云々んだったら
フルークとかいいのかなと思いましたで
みんな大好きひきでね同じぐらいの機能
入ったやつ探すとね2万5000円ぐらい
しますね1万5000円ぐらいの小型
スターみたいなやつもあるんだけどテスト
リードがねここに入らないのよなんか裏の
この辺に縦に刺すようになっててお兄さん
お気に入りのこのテストリード使えないん
でダメだなと思ってま条件合うもの探し
てくと結局2万5000円ぐらいのやつに
なっちゃうんでさすがにちょっとねそれは
高すぎるなと思ってやめましたDIYには
これぐらいがちょうどいいと思い
ますうんはいごちさでしたま分解は推奨し
ませんけどテスターでお兄さんみたいな
症状を出ちゃってる方はねこのダイヤル裏
の接点ちょっと掃除してあげてもいいかな
と思いますはいということでくさん出は
普段ジャンクフのシやってますこんな動画
ですがまた見たいな方はチャンネル登録
面白かったらグッドボタンお願いします
それではまたくさんでしたバイ
バイ
Weitere ähnliche Videos ansehen
5.0 / 5 (0 votes)