Bose 700 Replacement Pads - How To Install (Updated 2021)
Summary
TLDRこのビデオでは、OrphがBose 700ノイズキャンセリングヘッドホンのイヤーパッドの交換方法を紹介しています。交換には、包丁のような非鋭利な工具と新しいイヤーパッドが必要です。まず、古いイヤーパッドを外し、裏側に付いているフックを注意深く取り外します。次に、オプションでスクリーンマットを交換し、接着剤を除去します。新しいスクリーンマットをはり付け、新しいイヤーパッドを装着します。Orphは、Wicked Cushionsという自社ブランドでデザイン豊富なイヤーパッドを提供しており、より厚く、ステッチと接着で補強されており、1年間の保証が付いています。詳細はリンクをクリックするか、説明欄にあるメールアドレスで問い合わせてください。
Takeaways
- 🎧 ボストン700ノイズキャンセリングヘッドホンのイヤーパッドを交換するには、包丁のような非鋭利な工具が必要です。
- 🔨 イヤーパッドを外す際は、包丁を使ってイヤーカップとプラスチックの間に挟んで、複数の角度からゆっくりと剥がします。
- 🔍 イヤーパッドの裏側には6つのフックがあり、それらがヘッドホンのイヤーカップのスロットに嵌められます。
- 💡 フックが壊れると、イヤーパッドを再び装着できなくなりますので、取り外す際には注意が必要です。
- 🧽 スクリーンマットを交換する場合は、接着剤で固定されているので、それらを引き抜いて、接着剤の跡を削ってください。
- 🚫 スピーカーの配線を覆っている部分は外さないでください。これは接着剤ではありません。
- ⏱ スクリーンマットの接着剤を削除するプロセスは、ビデオの中で最も時間がかかる部分です。
- 🔄 新しいスクリーンを装着する際は、右側が電源ボタンがある側であり、その側に合わせて装着します。
- 🎨 新しいイヤーパッドを装着する際は、6つのフックをスロットに合わせて、上から下へと挿入していきます。
- 🛍 オリジナルよりも厚みのあるイヤーパッドが提供されており、365日間の保証が付いています。
- 🛒 特別なデザインのイヤーパッドを手に入れるには、ビデオの右上隅にあるリンクをクリックするか、説明欄のリンクを参照してください。
- 📢 このビデオが役立ちましたら、いいねボタンを押してチャンネルを購読し、今後のビデオも楽しみにしてください。
Q & A
どのようなヘッドホンのイヤーパッドを交換する手順が説明されていますか?
-ボーズ700ノイズキャンセリングヘッドホンのイヤーパッドを交換する手順が説明されています。
イヤーパッドを交換するために必要な道具は何ですか?
-イヤーパッドを交換するためには、包丁ではなく、刃物を使わずに穏やかに扱えるバターナイフが必要です。
なぜバターナイフを使用する必要がありますか?
-バターナイフは鋭利ではありませんが、イヤーパッドとプラスチックの間に挟み込むことで、イヤーパッドを外す際に傷をつけずに穏やかに取り外せるからです。
イヤーパッドの裏側には何がありますか?
-イヤーパッドの裏側には、イヤーカップのスロットに差し込むためのフックがあります。合計で6本のフックがついています。
フックが壊れてしまった場合、どうなりますか?
-フックが壊れてしまった場合、イヤーパッドを再び装着することができなくなります。そのため、取り外す際には丁寧に扱う必要があります。
スクリーンマットはどのように取り外しますか?
-スクリーンマットは接着剤で貼られています。それらを単純に引っ張って取り外すことができます。
接着剤を剥がした後、どのような処理が必要ですか?
-接着剤を剥がした後、残った接着剤をスクラブして剥がしますが、スピーカーの配線を覆っている部分は触らないでください。
新しいスクリーンマットを装着する際には、どのようなポイントがありますか?
-新しいスクリーンマットを装着する際には、右側が電源ボタンのある側であることを覚えておく必要があります。また、接着剤を剥がした後、きちんとスロットに合うように装着します。
新しいイヤーパッドを装着する際には、どのような手順が必要ですか?
-新しいイヤーパッドを装着する際には、イヤーカップの6つのスロットに6本のフックを合わせて、上から2本ずつ始め、片側を完了した後、他側を装着します。
動画の最後に提供されているイヤーパッドはどこで購入できますか?
-動画の最後に提供されているイヤーパッドは、ウィケッドクッションズから購入できます。彼らは多数のデザインを提供しており、365日間の保証も付いています。
この動画が役立ったと感じたら、どのような行動をお勧めですか?
-この動画が役立ったと感じたら、動画を高く評価する「いいね!」ボタンをクリックし、チャンネルを購読してもっとの動画を受け取ることをお勧めします。
質問や問題がある場合、どのようにして連絡を取ればよいですか?
-質問や問題がある場合は、動画のコメント欄にコメントを残すか、説明欄にあるメールアドレスで連絡を取ることができます。
Outlines
🎧 ボス700イヤーパッドの交換方法
orphが、ボス700ノイズキャンセリングヘッドホンのイヤーパッドの交換方法を紹介します。交換には、包丁ではなく、ブターナイフと新しいイヤーパッドが必要です。まず、ブターナイフを使って古いイヤーパッドを外し、取り外す際は、イヤーパッド裏側の6つのフックがヘッドホンのカップ内のスロットに嵌まる構造に注意して、ゆっくりと剥がします。次に、オプションでスクリーニングマットを外し、接着剤を剥がします。最後に、新しいイヤーパッドを装着。フックをカップ内のスロットに合わせて取り付け、デザインは「スピードレーサー」を紹介しています。
🛍️ 特別なイヤーパッドの入手先
orphは、ボス700のイヤーパッドを「スピードレーサー」デザインで装着していますが、そのようなデザインのイヤーパッドを手に入れる方法を説明します。彼が所属する「wicked cushions」がデザインを提供しており、オリジナルよりも厚みがあり、365日の保証付きです。詳細は、ビデオの右上隅のリンクや説明欄のリンクからアクセスできます。また、ビデオが参考になった場合は、いいねボタンを押してチャンネル登録をお願いします。
Mindmap
Keywords
💡ear pad
💡Bose 700
💡noise canceling headphones
💡butter knife
💡ear pad hooks
💡screen mats
💡adhesive
💡warranty
💡Wicked Cushions
💡speed racer design
💡comment section
Highlights
Orph from Wicked Cushions demonstrates how to replace ear pads on Bose 700 noise-canceling headphones.
A butter knife is recommended for a non-sharp, gentle removal of the old ear pads.
Ear pads are attached to the headphones with six hooks that fit into slots on the ear cup.
Gentle removal is crucial to avoid breaking the hooks, which would prevent reattachment.
Optional step to replace screen mats, which are attached with adhesive.
It's important to remove leftover adhesive without damaging the speaker wire covering.
Removing adhesive is the most time-consuming part of the process.
New screens should be attached with the right side identified by the power button.
Positioning the new ear pads involves aligning the six hooks with the corresponding slots.
Wicked Cushions offers a variety of designs for ear pads, including a Speed Racer design.
Their ear pads are thicker than the original, with an inside seam that is stitched and glued.
Wicked Cushions provides a 365-day warranty on their ear pads.
A link to purchase Wicked Cushions' ear pads is available in the top right corner or video description.
The video offers help and encourages viewers to leave comments or contact via email for questions.
Viewers are encouraged to like and subscribe for more helpful videos.
Wicked Cushions ear pads are designed for comfort and durability.
The video concludes with an invitation to stay awake and engaged with the content.
Transcripts
[Music]
hey everyone this is orph from wicked
cushions and today i'm going to show you
how to replace the ear pad on your bose
700 noise canceling headphones to
replace your ear pads
all you are going to need is a butter
knife get something that is not sharp
and a pair of ear pads by the way if you
do need ear pads
stay to the end of this video and i'll
show you exactly where you can grab some
now let me move you to the top of the
table and i'll show you how to replace
the ear pads
okay so let's start the first step is
going to be removing the old ear pads
the way you're going to remove it is
you're going to grab the butter knife
again as i said
use something non-sharp and you want to
be gentle with it
you're just going to place it in between
the gap
that is in between the ear pad and the
plastic
so you're going to do this from several
angles and then you're just going to
slowly pop it up you see how you hear
those clicking sounds
i'll show you why you have those
clicking sounds once the earpad is out
alright so the reason you have these
clicking sounds is because the way that
the ear pad is attached
is that the ear pad itself on the back
side has
a bunch of hooks it has eight hooks six
hooks i'm sorry
and the hooks go inside the slots
that are positioned on the headphone ear
cup
now let's remove the other one
and the reason you want to be gentle
with it is because
once you remove them you don't want the
hooks to break
because if one hook from the ear pad is
missing
you won't ever be able to put it on
again
okay so the next step is optional you
have the screen mats
now you might not want to replace them
yet but if you do
you're simply going to grab them and
pull them out
they're attached with adhesive after
you've removed them
you want to remove the leftover adhesive
that was holding them in place
simply scrape it off
[Music]
now pay attention right here before you
remove
the leftover adhesive you got to
remember that these two parts right here
you are not supposed to remove this is
not the parts
that are from the adhesive this is a
covering that covers the wire
for the speaker so you don't want to
touch this one
you only want to touch these ones around
but you don't want to touch that one
you'll see it that it goes from the
silver
metal covering to the bottom it's at the
bottom
of it so you don't want to touch that
one
[Music]
now removing the adhesive is going to be
the longest process of this entire video
so that is the hardest part but after
this
it's all easy
now after you remove all the adhesive
you want to take
the new screens and attach them now if
by any chance you removed all of them
and you forgot which side is which
just remember that the right side is the
side with the power button
right here so i'm going to take the
right side
and i'm going to position it like that
all right
i'm just going to take off the adhesives
after i took off the adhesive layers i'm
just going to position it like that
it's going to fit nice inside then we'll
move to the left one
and then position that one inside
and that's it now let's move on to
installing the new ear pads
i'm going to grab our speed racer design
so as i said
six hooks all around you want to
position them
with the six slots inside i'm just gonna
start with the
top two
all right one side is done and then the
other side
[Music]
and that is it you have successfully
replaced your bow 700 ear pads
i know that i promised to tell you where
you can grab some of those sick ear pads
like the speed racer that i have on my
headphones
well the answer is we make the wicked
cushions we have a bunch of other
designs
i personally love the speed racer the
most that's why i have them on
our ear pads are thicker than the
original their inside seam is stitched
and glued and they come with a 365 day
warranty if you want to try them out
click the link in the top right corner
right now
or in the description below and let me
know what you think
and that is it for today's video
everyone i hope that it was helpful
if you have any questions don't hesitate
to leave a comment in the comment
section below
or contact us with the email information
we have in the description
if this video ended up being helpful for
you please click the like button and
subscribe to our channel for more videos
like
this every month and i will see you on
the next one meanwhile
stay awake in my friends
[Music]
you
5.0 / 5 (0 votes)