Apple Arrow Motion Graphics in After Effects - After Effects Tutorial
Summary
TLDRこのビデオでは、After Effectsを使用してAppleビデオからアニメーションを作り直す方法が解説されています。第三者プラグインを使わずに、新しいコンポジションを作成し、テキストを追加し、位置合わせを行っています。次に矢印をアニメーションさせるためにTrim PathsやStrokeのアニメーションを追加し、時間の制御を行います。さらに、手書き風のエフェクトを追加して自然な感覚を出す方法も紹介されています。最後に、すべてのアニメーションを適切なタイミングで流れるように調整し、完成させます。
Takeaways
- 🖥️ スクリプトは、After Effectsを使用してAppleビデオからアニメーションを再現する方法を説明しています。
- 🔧 第三者プラグインを使わずにアニメーションを作成することが目標です。
- 🎬 メインコンポジションとアニメーションコンポジションの2つのコンポジションを作成し、それぞれ異なるサイズとフレームレートを設定します。
- 🖌️ テキストツールを使用してテキストを追加し、フォントや位置を調整します。
- 🔄 テキストを複製して新しいテキストレイヤーを作成し、異なるテキストを入力します。
- 📏 矢印を手動で描画し、色や太さを調整してアニメーションに合わせます。
- 🔄 トリムパスを使用して矢印のアニメーションを追加し、透明度や位置をキーフレームで制御します。
- ✍️ テキストのアニメーションはワードバイワードで表示され、イージングを調整して滑らかにします。
- 🎯 矢印のアニメーションのタイミングを調整し、テキストの表示と同期させます。
- 🎨 最後に、手書き風のエフェクトを追加して矢印に自然なディストーションを与えます。
- 🔗 チュートリアルのプロジェクトファイルはPatreonで利用可能で、サポート者は専用テンプレートにアクセスできます。
Q & A
ビデオのタイトルは何ですか?
-ビデオのタイトルは「このAppleビデオのアニメーションをプラグインを使用せずに再現する方法」です。
ビデオで使用されているソフトウェアは何ですか?
-ビデオではAdobe After Effectsを使用しています。
新しいコンポジションのサイズとフレームレートは何ですか?
-新しいコンポジションのサイズは1920x1080で、フレームレートは30FPSです。
テキストを追加する際にはどのようなツールを使用しますか?
-テキストを追加するにはテキストツールを使用し、直接コンポジションにタイプします。
テキストのフォントとスタイルはどのように設定されますか?
-テキストのフォントはMoneraで、太字を使用しています。フォントはビデオ内で自由に変更可能です。
アニメーションを作成する際に使用する矢印の色は何ですか?
-矢印の色は緑系の色を使用していますが、色は好みに応じて自由に変更可能です。
矢印のアニメーションはどのようにして作成されますか?
-矢印のアニメーションはトリムパス(Trim Paths)プロパティを使用して作成され、アニメーションの開始と終了をキーフレームで制御します。
テキストのアニメーション効果はどうやって追加されますか?
-テキストのアニメーション効果は位置と不透明度のプロパティをアニメーターパネルでアニメーション化し、ワード単位でアニメーションを適用して追加されます。
矢印のエッジを丸くするにはどうすればいいですか?
-矢印のエッジを丸くするには、ラインキャップを「丸いキャップ」に設定し、ALTキー(Macではオプションキー)を押しながらエッジを調整します。
チュートリアルのプロジェクトファイルはどこで入手できますか?
-チュートリアルのプロジェクトファイルはPatreonで入手可能です。サポートする場合は、Patreonページをチェックしてダウンロードしてください。
チュートリアルの作成者は誰ですか?
-チュートリアルの作成者はAbishekです。
Outlines
🎬 「After Effectsでアニメーションを作る」
この段落では、After Effectsを使用してAppleのビデオからアニメーションを作り、サードパーティプラグインを使わずに再現する方法が説明されています。新しいコンポジションを作成し、幅と高さを設定し、フレームレートを30FPSに設定します。次に、アニメーション用に非常に長いコンポジションを作成し、背景を追加し、テキストを入力してフォントと位置を調整します。
🖋️ 「テキストと矢印のアニメーション」
テキストの追加と配置が完了すると、矢印をアニメーションさせるためにTrim Pathsを使用し、開始フレームと終了フレームを設定します。テキストのアニメーションは、文字が1つずつ表示されるように調整され、イージングを適用して滑らかにします。矢印のアニメーションは、テキストのアニメーションと同期させるためにタイミングを調整し、さらに曲がった矢印やループする矢印を追加します。
⏱️ 「アニメーションのタイミング調整」
このセクションでは、アニメーションのタイミングを調整し、矢印が適切なタイミングで表示されるようにします。Graph Editorを使用して、アニメーションの速度と加速度を微調整し、より自然なアニメーション効果を実現します。また、アニメーションの複雑さを増やすためにRoughen Edgesエフェクトを適用し、手書きのような風合いを出す方法も紹介されています。
🎉 「完了とプロジェクトファイルの提供」
全ての矢印がアニメーションされ、適切なタイミングで表示されるようになりました。最後に、アニメーションの最終的な調整を行い、プロジェクトファイルはPatreonで提供されています。サポート者は、チュートリアルのプロジェクトファイルやPatreon限定のテンプレートにアクセスできます。チュートリアルはAbishekによって提供され、次のビデオでお会いできると締めくくります。
Mindmap
Keywords
💡After Effects
💡コンポジション
💡テキストツール
💡アニメーション
💡矢印
💡トリムパス
💡アニメーター
💡グラフエディター
💡エフェクト
💡パトロン
Highlights
在After Effects中创建新的组合,命名为'main',设置尺寸为1920x1080,帧速率为30 FPS。
创建第二个组合'animation',尺寸放大四倍,用于动画制作。
使用文本工具添加文本,并通过字体和大小调整来美化文本。
通过复制和移动文本,创建多个文本层,用于后续动画。
在主组合中调整文本位置,确保文本居中对齐。
使用钢笔工具绘制箭头,设置箭头的粗细和颜色。
通过设置线帽为圆角,使箭头看起来更平滑。
使用修剪路径动画,使箭头动态显示。
对文本进行动画处理,使其逐字显示,并添加缓动效果。
调整箭头动画的时序,使其与文本动画同步。
通过复制和粘贴关键帧,快速应用动画效果到其他箭头。
使用粗糙边缘效果,为箭头添加手绘风格。
调整箭头动画的时序和持续时间,以匹配文本动画。
通过增加组合尺寸,确保所有元素在画面中完整显示。
教程项目文件可在Patreon上获取,支持者可下载。
使用不同的箭头样式和动画,增加视觉效果的多样性。
通过调整箭头动画的缓动和时序,实现流畅的动画效果。
最终效果展示了文本和箭头动画的和谐组合。
Transcripts
today we are going to recreate this
animation from the apple video without
using any third party plugin so let's
see how to make
this all right right now I'm in After
Effects and we will Begin by creting a
new composition so let's call this one
main width and height will be 19 20 x
1080 frame 30 FPS and duration you can
pick whatever you want just click on
okay so here we have our composition now
let's create another composition so
let's go to composition and I'm going to
call this one animation this one we're
going to make it like really long so I'm
going to set the width to 19 20 let's
multiply it by 4 and rest of things will
remain same just click on okay so here
you can see we have this very lengthy
composition which is we are going to use
for this sort of Animation so first I'm
going to like create a solid so right
click new let's add a
solid and you can pick whatever color
you want I'm going to like pick a little
bit off height something like that just
click on okay so here we have our
background now our next step is to like
add our text so for that you can select
the text tool just click and you can
type whatever you want so I'm going to
type so here we have our first text and
it's completely up to you you can type
whatever you want I'm going to like
quickly change its font so let's set
this to Monera I'm going to use this
moner at bold font but it's completely
up to you can pick whatever you want so
let's select this and I'm going to like
make it anle point in the center Also
let's align it in the center of this
composition vertically so just click
over here if you're not able to see the
Align panel then you can go to Windows
and from here you can enable it now
let's select this and press s and I'm
going to like quickly scale it down to
something like this so I think this
looks good perfect so once you're happy
with this we can like place this
somewhere around here perfect now we are
ready to create more text so I'm going
to like simply move a little bit ahead
and I'm going to like select this text
and let's press contrl D to duplicate
this now let's move this text and let's
place it somewhere around
let's keep it to this
point and let's quickly change this to
hard work but it's completely up to you
can pick whatever text you want so let's
just place it somewhere around here and
we can play around with this later on so
let's select this and I'm going to like
duplicate this and let's Place one text
over here let's type consistency now I'm
going to select this press contr D let's
type one more text and let's place it
somewhere around here now again we can
play around with their position let's
select everything and we can like move
them to this side now there's one more
thing we can go to the main composition
let's drag this animation over here and
I'm going to like put this to the left
mode side something like that so that we
can align this text only rest other text
we can like do it later on so first I'm
going to like make it a little bit to
this side so that this text is like
somewhere in the middle of this
composition let's enable the title
action save now you can like do it
precisely
so just move it to somewhere around here
yeah I think this is in the middle
perfect so now we can like change all
the other text according to this so
let's place this one like over here and
this one we can like place it
to this side and we can like move it to
this location and let's duplicate this
and let's type our last text and let's
just move it to wherever you want to
place this let's keep it in the center
somewhere around here perfect so here we
have all the text that we want to use
now we are ready to add some arrows to
this so first I'm going to like quickly
zoom in and I'm going to like draw an
arrow between these two so the basic
idea is going to be the same for all the
arrows and I'm going to set this to
let's say 20 and for the stroke I'm
going to like pick this green sort of
color again it's completely up to you
can pick whatever color you want so make
sure none of the layer is selected now
you can just simply click and you can
hold on the shift key or you can like do
it manually just click over here now I'm
going to like zoom in now I'm going to
like click to this point to make the
Arrow
Head and let's click back somewhere
around here first let me just quickly
change this color so that you will be
able to see what we are doing so here I
have like created this one more angle
but I'm going to like keep it somewhere
around here and let's click over here so
here you can see we have this Arrow Head
now in noworder to make this perfect to
to get rid of this we can like probably
move it like that perfect so here we
have our Arrow Head and we are ready to
animate it out but first i'm going to
like change its cap so let's search for
cap and over here we have this line cap
set this to rounded cap instead of butt
cap now you can see that the edges are
rounded but you will notice that this
Edge is rounded but this one is not so
in order to fix this all we have to do
is hold on the ALT key or option key on
Mac just click on this and you can see
that it will make it like rounded but
now you will have to like tweak this
further to make
this perfect something
like that so here you can see we have
this really nice Arrow perfect now let's
animate it so to animate it we are going
to like just add a trim path so let's
add it over here and let's go to trim
path and I'm going to like quickly
animate it using the end property so I'm
going to like set this to zero let's say
add a key frame let's move couple of
frames ahead and I'm going to like set
this to 100 so now if I press play you
can see we have this arrow and we have
added the animation to it perfect now in
order to like place it at the correct
timing we are going to like first
animate our first text which is this one
so let's quickly animate this it's very
easy let's go to animate and let's
animate its
position and under the animator let's
add a property let's add opacity as well
now for position I'm going to like place
it down down below and opacity I'm going
to set this to zero now we can go under
the range selector and let's add a key
frame for end or the start we can add a
key frame for start and let's go a
little bit ahead somewhere around here
we can like set this to 100 now we can
go under the advanc options and instead
of correctors we can set this to word
now if I press play you can see we have
this coming up word by word we can
select this press F9 to have little bit
of easing now in order to have more
easing we can like go inside and we have
this ease low so I'm going to set this
to 100 perfect we can move these key
frame like little bit ahead so that we
have this very smooth animation and as
soon as withd comes in we can like have
our line moving something like that
perfect now we can play around with the
timing of these arrows later on so after
that we can switch to this other text
which is this hard hard work and now
again we are going to like draw some
arrows now before we continue if you
enjoy my work and you want to support me
then you can check out my patreon page
over there you will get access to the
tutorial project files and exclusive
templates that are available only on
patreon make sure to check it out link
for that is in the description now let's
continue so let's select this and I'm
going to like draw a curvy Arrow so for
that we can like click a point somewhere
around here then click over here and
drag you can see it will create this
curvy line now you can let it go hold on
the ALT key to like grab this handle and
let's place it over here now again we
can create the arrow in the same way so
let's click over here and let's just
click to this
point again let me just quickly change
its color so that you can see what we
are doing so let's just place it over
here and we can like click somewhere
around here just like that again with
this one as well we can search for cap
and set this to rounded cap now we can
play around with this hold on the ALT
key and just click over here so that it
will make it
rounded something like that perfect so
here we have
our Arrow Head yeah I think this looks
good now instead of adding the trim path
we can just simply select this press CU
and we can just simply copy this
property and just select this layer and
just paste it by pressing control+ V now
here you can see we have already added
the key frames like that now we can
select these and let's select everything
press F9 now we can again play around
with the timing later
on like that now let's just add more
arrows over here so it's actually quite
easy now we can just simply duplicate
this so let's select this press s let's
uncheck these properties and I'm going
to set this to
-00 like that so here we have flipped
this or if you want you can like right
click go to transform and you can flip
it vertically or horizontally however
you want so I'm going to like flip it
this way so let's add an arrow to this
point again we can rotate it as
well like
that perfect now we can like extend this
so let's
just move it to this point perfect so
here we have like two arrows now in the
same way you can like have more arrows
over here as well now next step is to
let set the timing of these arrows so
let me just quickly go to the main comp
and and it's actually quite easy all we
have to do is just play around with the
position of this so let's add a key
frame and I'm going to like move it a
little bit ahead so let's play it so as
soon as withd comes in we have this
animation so I'm going to like move
couple of frames ahead and let's just
move it to this side and let's just make
the other text come in like that so now
we can select these key frames press F9
let's go to the graph editor and if your
graph looks different then make sure
you're using the speed graph not the
value graph now now I'm going to like
select this and let's zoom in and I'm
going to like change the craft to look
something
like that now if I press play you can
see we have this and we have this coming
in and I think the timing for the arrows
is very nice so we can probably make it
little bit faster something like that so
that it comes in very quickly like that
now if you want you can have more arrows
over here as well but if you don't want
then we can like keep on going so after
that we can have an arrow going from
this to this and there are a lot of
different page in which you can do that
so let me just quickly do that so let's
select this and we can draw some curly
arrows as well so for that you can like
select this just click over here and
just click and
drag and now you can like click
somewhere around
here and let's click to this
point probably move it like further away
so here you can see we have this looping
Arrow now again we have to do the same
thing just turn this away and let click
over here let's change the color just to
see what we are doing so let's just
click somewhere around here so that we
have these two lines and after that just
click over here now we can change the
cap set this to
rounded hold on the ALT key click over
here then just simply adjust these two
perfect so here we have our really nice
Arrow Head now if you think that this
side is little bit bigger then we can
make it big as well perfect so here we
have our Arrow now again we can copy the
this and just paste it over here so here
we have our curly arrow and we can play
around with its timing as well so after
this we can like move a little bit ahead
and let's go to the other text as well
so just simply move it to this side here
we have our next text and let's go to
the graph editor and just twak it to
looks something like that so now if I
press play here we have our first text
here we have our second and I think the
timing for the arrow is perfect if you
want to make it like really slow then
you can like increase the distance
between these
two like that and this as
well but after that you will have to
play around with the timing of the
arrows as well but I think this fast
motion is looking
good maybe a little bit of
delay like that so perfect so after that
you can like have more arrows coming in
just like we did over here just simply
duplicate these and just move them here
and there and you can have a bunch of
different arrows you can play around
with their size and just tweak them
however you
want like this and let's just play
around with its timing so as soon as
this Arrow hits we can have this one as
well perfect so in this way you can like
keep on creating and having did a lot of
different arrows and just keep on having
them so I will come back once it is done
so now I have created all the arrows now
if I press play you can see we have all
these arrows and they are emitting one
after other now in order to like fix all
of these arrows into this composition I
had to like increase the size so I just
changed it to
9600 and you can like CH increase the
size if you have like more text as well
but once we happy with this we are ready
to like twak this more so you can see
that right now all of these arrows are
like very perfect so we can like fix
them or like have some Distortion to
this so we can search for rough and
edges effect and let's just simply drag
it over here and after that you can play
around with couple of these settings so
right now you can see we have this like
little bit of extra details to this so
we can first increase the
size to something like that let's set
the complexity to one and also we can
like decrease the border so I'm going to
like set this to something like
four like that so here you can see it
will
like add some deformation to your arrow
and it will make it like look like
handdrawn or something so now you can
see that this is not perfectly straight
instead we have like little bit of bumps
over here now which makes it like little
bit natural so after that you can copy
this and just paste onto the all the
other
layers like that perfect so here we have
added everything now our last step is to
like just animate this out so here we
have our first frame and after that we
have like the second
one so let's just play around with their
timing as
well so this is the second
one and this is the third
one now in the same way we can like move
this
away like this and have the next text so
somewhere around here now if I press
play you can see we have all of
these and in the same way we can like
move a little bit ahead and have it to
stop at the CU now we can select the key
frames and let's just press F9 and I'm
going to like change all of these to
something like that so here you can see
we have this and we have all of the
other text as well so this is how you
can create these kind of Arrow
animations and you can like keep on
going and adding more text if you want
the project files for this tutorial is
available on patreon so if you're
supporting me over there then you can
download it from there and if you're not
you might consider it because you will
get access to the tutorial project files
and exclusive templates that are
available only on patreon so with that
being said my name is abishek and I'll
see you in the next one
[Music]
5.0 / 5 (0 votes)