Proses Produksi U Ditch || Mulai Dari Pembesian Sampai Pengecoran

Summary

In this video, Yusri walks through the fabrication and assembly process of Yudit (culverts), focusing on creating a structure with dimensions of 60 cm width, 80 cm height, and 120 cm length. The video covers the key steps, including assembling the rebar frame, adding reinforcements, welding, cleaning the mold, and applying lubricants before casting the concrete. Yusri also provides insights into the practical challenges faced on site, offering tips for better results. Viewers are encouraged to like and subscribe while following along with the detailed fabrication process.

Takeaways

• 👋 Introduction by Yusri, greeting viewers and hoping for their health and success.
• 🔧 The video is about the process of making a culvert (gorong-gorong).
• 📏 The dimensions for the culvert are 60 cm wide, 80 cm high, and 120 cm long.
• ⚙️ The video demonstrates the fabrication and assembly process of the culvert.
• 🛠️ Custom tools are used for easier handling of the materials, especially for tying the rebar (besi wermes).
• 🔗 Explanation of tying techniques with bendrat wire to secure the rebar in place.
• 🔩 Welding is used to strengthen the structure and prevent movement of the components.
• 🔧 Installation of additional reinforcement, referred to as 'ketiak,' for extra support.
• 🧼 Cleaning and lubricating the mold before inserting the fabricated parts to ensure smooth concrete pouring.
• 🚧 The concrete mix (readymix beton) is used for casting the culvert, followed by finishing touches before the final product is completed.

Q & A

What is the primary focus of the video?

The video focuses on demonstrating the step-by-step process of constructing a Yudit or culvert, including its fabrication and assembly.

What are the dimensions of the Yudit (culvert) being built?

The dimensions of the Yudit being built are 60 cm in width, 80 cm in height, and 120 cm in length.

What is the purpose of the tools shown in the video?

The tools are homemade and are used to help assemble the Yudit, including the application of wire mesh reinforcement and ensuring correct placement of materials.

Why is wire mesh (wermes) used in the construction process?

Wire mesh is used as reinforcement in the structure to provide additional strength and stability to the Yudit.

What method is used to bind the wire mesh in place?

The wire mesh is tied in place using bendrat wire to secure it and prevent movement during the construction process.

What is the function of the additional 'pembersihan' elements added to the Yudit?

The 'pembersihan' elements are additional reinforcements added to both sides of the Yudit for structural support, and they help reduce water absorption from the ground.

Why is the Yudit mold lubricated before use?

The mold is lubricated to ensure that the fabricated unit can be easily removed from the mold without sticking, and to achieve a smooth finish.

What is the significance of the cut holes in the Yudit?

The holes are cut in the Yudit to allow for easier installation on-site and to help reduce groundwater absorption by improving drainage.

What material is used for casting the Yudit?

Ready-mix concrete is used for casting the Yudit during the final stages of the construction process.

What is the final step after the Yudit is cast?

The final step is the finishing process, which ensures the unit is completed properly and checks for any issues like cracks or weak points before installation.