Walther PDP & PDP Match Steel Frame Setup with Joel Park & Ben Stoeger

Summary

In this video, the speaker discusses their personal modifications to Walther PDPs, expressing dissatisfaction with the factory setup. They've replaced the recoil spring with a lighter one, opting for an 18 or 20 lb spring for less snap and reduced felt recoil. The guide rod has been swapped for a ZR Tactical one-piece captive model, using a 15 lb spring for reliability. The speaker also prefers the dynamic performance trigger over the factory version due to its narrower shoe. Grip enhancements include using silicone carbide for a permanent solution or grip tape for a temporary one. The speaker concludes by sharing their envy for others' customized guns and hints at a playful rivalry.

Takeaways

• 🔧 The speaker believes Walther PDP guns are oversprung and prefers to replace the recoil spring with a lighter one, around 18-20 lb.
• ⚙️ The speaker uses ZR Tactical guide rods, specifically the 15 lb version, as the first modification for reliability.
• 🔍 To test if a gun needs a heavier spring, the speaker checks if the gun sticks out of battery slightly when chambered without a hard slingshot forward.
• 🏹 The speaker prefers the Dynamic Performance Trigger over the factory PDP trigger due to its narrower shoe, which is more comfortable to use.
• 🔩 The Walther plates that come free with the gun are deemed good to use by the speaker.
• 🛠️ For grip improvement, the speaker uses a permanent modification of applying silicone carbide over the factory grip panels.
• 🔄 The speaker mentions using grip tape as an alternative to the silicone carbide for a non-permanent grip solution.
• 🔄 The metal version of the gun receives the same modifications as the polymer version, emphasizing the consistency in the speaker's setup preferences.
• 💰 The speaker mentions a $5 trigger return spring as a minor, optional upgrade that doesn't significantly change performance.
• 📈 The speaker is envious of others' customized guns but also appreciates the benefits of shooting stock guns to improve skills.

Q & A

What is the speaker's opinion on the factory springs in Walther PDPs?

The speaker believes that the factory springs in Walther PDPs are over-sprung, which makes the guns feel like they kick harder and snap more.

What is the recommended recoil spring weight for the speaker?

The speaker prefers a lighter recoil spring, suggesting an 18 or 20 lb spring, but feels that the factory springs are closer to 40 lb, which is too heavy for their preference.

How does the speaker feel about the factory trigger shoe on the Walther PDP?

The speaker finds the factory trigger shoe too wide, causing them to press it from the side instead of straight back, which is uncomfortable.

What is the first thing the speaker replaces on every PDP they own?

The first thing the speaker replaces on every PDP they own is the guide rod, preferring the ZR tactical guide rods for their one-piece captive design.

What weight of ZR tactical guide rod does the speaker use and why?

The speaker uses a 15 lb ZR tactical guide rod because it prevents the gun from sticking out of battery when chambered, ensuring smooth operation.

What is the speaker's opinion on the dynamic performance trigger?

The speaker prefers the dynamic performance trigger over the factory PDP trigger due to its improved feel and function.

What aftermarket grip solution does the speaker use to improve the Walther PDP's grip?

The speaker uses silicone carbide as a permanent grip solution by covering the grip with JB Weld and adding silicone carbide for added traction.

What is the speaker's stance on using grip tape versus silicone carbide for grip improvement?

The speaker suggests that grip tape is a good temporary solution, but prefers the permanent modification of using silicone carbide for a more durable grip.

Does the speaker make any changes to the metal Walther PDP besides the recoil spring and guide rod?

No, the speaker does not make any other changes to the metal Walther PDP besides using a 15 lb recoil spring and the factory grip plate.

What is the speaker's view on using factory parts versus aftermarket modifications on Walther PDPs?

The speaker appreciates the potential benefits of aftermarket modifications but also values shooting the guns more stock to help with personal growth and skill development.

What additional modification does the speaker mention for the Walther PDP that is coming out soon?

The speaker mentions that Walther is coming out with variations for the grip, which they have tried and found to be grippy.