SETELAH TAU TRIK INI, PASTI BANYAK YANG AKAN MENCOBANYA !!

Summary

This video demonstrates how to repair a broken LED light bulb using simple materials. It first tests the bulb to confirm it's broken, explaining how the LEDs are wired in series so if one burns out they all stop working. The presenter disassembles the bulb, identifying the burnt out LED. After cleaning the connection points, it's rewired using copper strands from a cable to bridge the gap and electrical tape to insulate. The repaired bulb is reassembled and tested, lighting up once again. This easy, economical DIY repair saves money instead of replacing the whole bulb.

Takeaways

• 🛠 Don't throw away broken lights; you can repair them at home with basic tools and materials.
• 🔧 This repair tutorial is beginner-friendly and requires no prior knowledge of electronics.
• 🚧 The demonstration confirms the electrical functionality before and after the repair to ensure authenticity.
• 💡 Understanding the difference between series and parallel circuits is essential for troubleshooting and repairing.
• 💻 A single faulty LED in a series circuit can cause the entire light to stop working.
• 🔨 The repair process involves identifying and removing the damaged LED using simple tools like a matchstick.
• 📱 Cleaning the affected area is crucial for a successful repair, using tools like a knife or cutter.
• 🚩 Insulating tape is used to reconnect the circuit, providing a practical and economical repair solution.
• 💧 Safety precautions and non-conductive tools are recommended to avoid electrical shocks during the repair.
• 💡 The repaired light is tested for functionality to confirm the success of the repair process.
• 💸 This DIY repair method is cost-effective, saving money that would otherwise be spent on new lights.

Q & A

What is the purpose of the video?

The purpose of the video is to teach viewers how to fix and repair broken lamps using simple materials like electrical tape.

What causes the lamps to stop working?

The lamps stop working because one of the LEDs in the series circuit burns out, breaking the circuit.

How does a series circuit work?

In a series circuit, all components are connected end-to-end in a single loop. If any component fails, it breaks the loop causing all lamps to turn off.

How do you remove the burnt out LED?

Use a lighter to heat up the soldering points beneath the LED until the LED comes loose. Then pry it out with tweezers.

What materials are needed to fix the lamp?

You need some stranded copper wire and electrical tape to bridge the gap left by the burnt out LED and complete the circuit again.

How is the wire connected?

Strip the insulation off the wire. Place it across the gap, taping it down with electrical tape to hold it in place.

Why is electrical tape used?

The electrical tape insulates the exposed copper wire so there is no risk of electric shock when handling the lamp.

How is the circuit tested?

Once reassembled, plug the lamp into a live outlet to verify all the LEDs light up again.

What are the benefits of this repair method?

It is a quick, easy and economical way to fix burnt out lamps without needing to buy replacements.

Can anyone do this repair?

Yes, it is simple enough for beginners with no electronics experience to follow and perform successfully.