Miniatur Pembangkit Listrik Tenaga Air

Summary

The video demonstrates a creative process of constructing a miniature water wheel generator. It begins with assembling the wheel frame and attaching soft components to support rods. A water tank is then prepared with pipes and sealed with glue. The project continues with the creation of a mini gazebo using ice cream sticks, following an online tutorial. The final steps involve attaching the gazebo to a plywood board, fixing the water wheel to a box, and securing the generator with clips connected to a light. The project showcases a fun DIY approach to building a functional model.

Takeaways

• 😀 The first step is to create the framework for the windmill.
• 😀 Insert the soft material into the windmill's hole and attach both sides to the supporting structure.
• 😀 Seal one end of the soft material with a small piece of leather.
• 😀 Attach a large needle to the leather piece, which will later connect to the generator using a belt.
• 😀 Install the first water reservoir by attaching a pipe to the bottom of the container.
• 😀 Make a hole at the bottom of the container using a shoulder to attach the pipe.
• 😀 Ensure the pipe is securely connected and sealed to prevent leaks.
• 😀 Create a miniaturized gazebo following a YouTube tutorial titled 'Miniature Gazebo from Ice Cream Sticks'.
• 😀 Before attaching the windmill framework to the container, attach the blades to the framework.
• 😀 Attach the completed gazebo to a plywood board and then secure the container at the front of the board.
• 😀 Finally, attach the water wheel frame to the left side of the container and secure the generator in place.

Q & A

What is the first step in the process described in the script?

The first step is to create the framework of the windmill by inserting the soft material into the holes of the windmill.

How are the sides of the soft material attached to the windmill's frame?

The two sides of the soft material are inserted into the holes of the windmill's support frame, and are then closed using a small piece of leather at one end.

What role does the large leather piece play in the assembly?

The large leather piece is used to connect the windmill's frame to the generator using a belt.

What is done with the water tank in the process?

The water tank is attached to a pipe at the bottom of a jar, which is then drilled to fit the pipe and ensure the hose is properly connected and sealed.

How is the water tank secured during assembly?

The water tank's hose connection is sealed and glued to ensure it stays in place.

What is the purpose of the mini gazebo in the project?

The mini gazebo is built using ice cream sticks, based on a tutorial from the YouTube channel 'Creative Dulur'. It serves as part of the overall assembly.

How is the gazebo attached to the project?

Once the gazebo is completed, it is glued onto a plywood board as part of the setup.

How are the windmill's wings attached?

The wings of the windmill are glued together before the frame is fixed into the container.

What happens after the windmill's frame is attached?

After the frame is attached, the generator is mounted on the side of the container, and the entire setup is further secured with clips and connections.

How is the generator connected to the system?

The generator is connected to the system by being clipped onto a crocodile clip, which is linked to the lamp.