[ジムニーレストア]ブレーキとデフ分解して消耗品交換❗️サンドブラストが素晴らしすぎる❗️
Summary
TLDRThe transcript appears to outline detailed steps for overhauling or restoring the rear axle assembly and brakes of a vehicle, including disassembly, cleaning, sandblasting, replacement of worn parts, reassembly and adjustments.
Takeaways
- 🚗 The video begins with the intent to disassemble and inspect the rear housing of a vehicle, highlighting a previous error made in drilling holes for an air locker installation.
- 🔨 Progression includes dismantling brakes, removing the differential, and reassembling the air locker, with a focus on using new parts for refreshing and solving compressor issues.
- 🛠 Mention of sandblasting backplates and other parts for cleaning, indicating a thorough refurbishment process.
- 💥 Despite a playful wish to drive the Jimny in the snow, the necessity of repairs takes precedence, showcasing dedication to vehicle maintenance.
- 📌 Covers the process of draining differential oil as an initial step, suggesting meticulous attention to detail in the overhaul process.
- 📑 Emphasizes the importance of documenting the disassembly process to avoid forgetting steps, demonstrating a methodical approach to vehicle maintenance.
- 🔧 Discusses a modification known as 'one-touch processing' to improve maintenance efficiency by enabling shaft removal without dismantling the brakes.
- 📝 Shares insights on the decision-making process for reusing or replacing parts, balancing cost, effort, and the condition of existing components.
- 🛩 Highlights the use of sandblasting for cleaning, along with a candid discussion on its effectiveness and operational challenges.
- 🔥 Details the meticulous process of adjusting backlash and checking tooth contact for the gears, indicating precision in the reassembly.
- 📚 Offers practical advice on dealing with common issues encountered during the process, such as dealing with seized components and ensuring correct reassembly.
- 📱 Concludes with reflections on the learning experience, plans for future modifications, and an invitation for viewers to engage with the content.
Q & A
What kind of vehicle is being worked on?
-A Suzuki Jimny.
What is the main goal of the work being done?
-To disassemble and overhaul the rear differential.
What issues were there previously with the rear locker installation?
-There were some mistakes made with the hole drilling that need to be fixed.
What will be done to the brake components?
-The brakes will be refreshed with new parts where possible and everything will be cleaned/sandblasted.
What is the purpose of sandblasting the components?
-To clean and remove dirt, oil, rust etc. to make the parts look fresh again.
How are the axle shafts removed?
-The brake components need to be completely disassembled first before the axle shafts can slide out.
What adjustment is done to the ring gear?
-The backlash (gap between ring and pinion gear) is set to the specified 0.1-0.15mm range.
How is the gear contact pattern checked?
-By applying a marking compound and rotating the gears to look for the contact pattern.
What potential upgrades are planned for later?
-Swapping out the hub bearings, upgrading the back plate, and more brake refreshing.
What was the key lesson learned from doing this job?
-Gained valuable experience disassembling a differential for the first time, despite it being time consuming.
Outlines
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowMindmap
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowKeywords
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowHighlights
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowTranscripts
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowBrowse More Related Video
【簡単】最強最速のチャンバー内部清掃 ブレーキO/H、電装部品レストア【20万のランツァ】 YAMAHA DT230 #5
komponen mesin cylinder head mobil
EVERY MAINTENANCE ITEM: Mercury/Tohatsu 4HP/5HP/6HP 4-Stroke Outboard
How to Replace a Transmission (Full DIY Guide)
Overhauling Our Ship's Generator Engine part 1| Seaman Vlog
7.62mm self loading rifle kholna or jodna
5.0 / 5 (0 votes)