🛠 Changer la pompe du liquide lave glace – Tuto Boxster 986 Porsche 996

Summary

In this video, Piston Kirk demonstrates how to replace the windshield washer fluid pump on a Porsche Boxster 986 or 996. The tutorial covers testing the pump versus the switch, and while checking the pump's voltage is recommended, Kirk opts for directly replacing the pump due to its affordability. He explains the process for both standard and Litronic headlight models, highlighting key steps like removing the wheel, bleeding the washer tank, and replacing the pump. The video is detailed, with additional advice for those with headlight sprinklers and tips for sourcing a pump at a lower cost.

Takeaways

• 🔧 The video demonstrates how to replace the windshield washer fluid pump on a Porsche Boxster 986 or 996, highlighting that they share similar components.
• 💡 Before replacing the pump, it is advised to check if the issue is with the switch using a voltmeter, as it may not necessarily be the pump that's faulty.
• 🛠️ Disassembling the wheel arch, removing the tank, and using a voltmeter are necessary steps to determine if the pump is receiving power when the switch is activated.
• 💰 The video suggests replacing the pump directly if an issue is detected, as aftermarket pumps are affordable, costing around €12.90, compared to the dealership's €70 price.
• 📦 The host mentions ordering a new pump from eBay, costing €13.80, including shipping, rather than purchasing from a dealership.
• 🚗 For vehicles with Litronic (Xenon) headlights, special care is needed to ensure the correct pump is ordered, as the headlight washer pump differs from the windshield washer pump.
• 🧰 The first step in replacing the pump is lifting the car and removing the wheel to access the plastic wheel arch and tank.
• 🚿 It's important to drain the washer fluid tank completely before proceeding with the pump replacement to avoid any mess.
• 🔩 The process of disassembling the tank varies depending on whether the car has standard or Litronic headlights. The video provides instructions for both scenarios.
• ✅ After replacing the pump, the video advises testing the new pump before fully reassembling the parts to ensure it works correctly and avoid redoing the entire process.

Q & A

What is the first step in replacing the windshield washer fluid pump on a Boxster 986 or Porsche 996?

The first step is to jack the car up to remove the wheel so that you can remove the plastic wheel arch.

How do you determine if the pump or the switch is broken?

You should remove the wheel arch, remove the tank, disconnect the electrical plug from the pump, and use a voltmeter to check if there is current coming in when using the switch. If there is current, the pump is likely out of order.

What is the cost of a new pump for these models if purchased from a non-dealer source?

The cost of a new pump is €12.90 when purchased from a source other than a dealer, such as online.

Why does the video suggest replacing the pump without testing if it's the switch that's broken?

Since you have to disassemble everything to do a test, it might as well replace the pump directly with a new one because it's affordable and the original pump is over 20 years old.

What is the price range for the pump if purchased from a dealer?

Porsche sells the pump for around €70.

Which brands used this specific pump model?

The pump was used by many brands including Audi, BMW, Chevrolet, Mercedes, Peugeot, Porsche, Saab, Seat, Skoda, Smart, Volkswagen, and Iveco.

How much did the pump cost including shipping when purchased on eBay?

The pump cost €13.80 including shipping when purchased on eBay.

Why should you be careful when ordering the pump if your car has headlights with jets?

The pump used to feed the headlights with jets does not have the same shape as the one used for the windshield sprinklers, so you should ensure not to confuse the two when ordering.

What is the purpose of the sprinklers in Litronic headlights?

The sprinklers in Litronic headlights are there to melt snow by spraying windshield washer fluid with antifreeze, as Xenon headlights do not heat up and snow can accumulate on them.

How do you bleed the tank during the replacement process?

To bleed the tank, put a container underneath, go to the wing to pull the pipe that runs alongside the washer tank, and let the fluid flow into the container until the reservoir is empty.

How long does the replacement process take?

The operation can take 1 to 2 hours depending on your level of experience.