Beko Vollintegrierter Geschirrspüler Einbau & Montage

Summary

The video provides a detailed guide on how to properly install a dishwasher, emphasizing the importance of verifying measurements and following the manufacturer's guidelines to prevent issues like condensation and mold. It covers checking niche dimensions, preparing the damp barrier, and adjusting the appliance for proper fit. The video also explains how to mount the front panel, connect hoses, and secure the appliance. Potential issues like blockages or water supply problems are addressed with troubleshooting tips, ensuring the dishwasher operates correctly after installation.

Takeaways

• 📏 Before installation, always compare the niche dimensions with the manufacturer's specifications, which are available on their website or upon request.
• 🔧 First, check the depth of the niche, especially if the dishwasher has turbo drying. The niche depth should be at least 56-57 cm to prevent mold or condensation issues.
• 📐 The height of the front panel should be between 70-76 cm. For fixed mounting, the front panel should not weigh more than 6 kg, and for sliding door systems, it shouldn't exceed 9 kg.
• 🔩 The niche height should be between 82-92 cm, and the width should not exceed 610 mm. If the niche is too large, installing an XL device is recommended.
• 🛠️ A vapor barrier should be installed to protect the countertop from steam damage, and it should be properly aligned and applied without air bubbles.
• 🚪 If using foot elevation to align the device with the countertop, adjust the front and rear feet accordingly to ensure the dishwasher is level.
• 🚰 Ensure that hoses and cables are properly placed in the sink cabinet to prevent kinking and obstructions, particularly for the water inlet and drain hoses.
• 🔧 Fix the dishwasher in the niche using screws or an anti-tipping bracket, especially if the niche is wider than 60 cm.
• 🧰 Sliding door systems allow longer front panels to be used without them hitting the base, and require special installation steps to ensure smooth operation.
• 💧 During the test run, check for leaks in the water supply and drainage, and ensure that the water hardness is correctly set for optimal dishwasher performance.

Q & A

What is the minimum depth required for a niche when installing a dishwasher with turbo drying?

The niche depth must be at least 56 to 57 cm for dishwashers with turbo drying, as the drying system ventilates through the back. If there is insufficient space, mold or condensation can form, especially in high-mounted units.

What is the acceptable height range for the front panel of the dishwasher?

The front panel should be between 70 and 76 cm in height. For fixed-mount systems, the minimum weight is 3 kg, with a maximum of 6 kg for fixed systems and 9 kg for sliding door systems.

What are the guidelines for the niche's height and width when installing a standard dishwasher?

The niche height should be between 82 and 92 cm, and the width should not exceed 610 mm. The dishwasher is designed for a standard niche width of 60 cm.

What adjustments are needed if the niche is too large or the front panel exceeds 76 cm in height?

If the niche is too large or the front panel is longer than 76 cm, an XL model may be a better fit. Alternatively, a spacer strip can be used for a standard device. Detailed instructions for this are provided in a separate video.

What is a potential risk when installing the dishwasher improperly, and what does the manufacturer advise?

If the installation does not follow the manufacturer's guidelines, escaping steam can damage the furniture fronts or countertop. The manufacturer does not assume liability for such damage. Always follow the manufacturer’s instructions to prevent these issues.

What steps must be taken before sliding the dishwasher into the niche?

Before sliding the dishwasher into the niche, install the vapor barrier by cleaning and drying the countertop. The barrier should be adhered without air bubbles and should protect the sides as well.

What must be checked if the dishwasher displays error code E01 during operation?

Error code E01, which indicates that the dishwasher is constantly pumping out water, suggests that the drain is blocked. This issue usually arises after the dishwasher has run for some time.

How is the furniture front attached to a dishwasher using sliding technology?

With sliding technology, the front is guided by rails at the top and fixed with side screws on the door's spring mechanism. The front is slightly raised when the door opens, preventing it from hitting the plinth.

How can a dishwasher's insulation be installed to reduce noise?

To lower the noise level, insulation material is applied by first removing the protective tape and attaching the insulation to the dishwasher’s base and door using plastic pins. Any obstruction caused by the insulation to sliding technology should be trimmed.

What should be done if the dishwasher shows error code E02, indicating insufficient water supply?

Error code E02 means the dishwasher isn't getting enough water. First, check if the water inlet hose is kinked. If rust has accumulated in the Aquastop valve, clean the filter using a pair of tweezers.