MEMBUAT ALARM BANJIR SEDERHANA
Summary
TLDRIn this video, viewers are guided by Bapak SQ through the process of creating a simple flood alarm. The aim is to detect floods early by using a battery, wire, Styrofoam, and aluminum foil. The alarm is assembled into a box with a small and large straw to sense water level rise. When the water touches the alarm, it will sound, indicating a flood. The tutorial is practical, emphasizing safety and seeking adult help for cutting parts. The final test shows the alarm successfully detecting water level increases, providing an early warning system.
Takeaways
- 😀 The video is a tutorial from School Center Sekolah Pembangunan Jaya, introducing a simple flood alarm device.
- 🛠️ The main purpose of the flood alarm is to detect rising water levels early to alert people of potential flooding.
- 🔋 The materials required for the project include a single-use battery, wires, scissors, a ruler, string, Styrofoam, plastic wrap, a small and large diameter straw, aluminum foil, and a marker.
- 📏 The dimensions for the box are specified as 3 cm by 4 cm, with specific points marked for drilling holes.
- ✂️ Safety is emphasized when using a cutter, suggesting that children ask for adult assistance to avoid injury.
- 🚿 The straws are cut to specific lengths, with the larger one being 10 cm and the smaller one being 16 cm, to fit into the holes in the box.
- 🔩 The assembly process involves attaching the straws to the box and ensuring they stand upright for proper functioning.
- 🏷️ Aluminum foil is used to cover the Styrofoam, and a marker is used to label the parts for clarity during assembly.
- 🔌 The electrical wiring involves connecting a black wire from the battery to the circuit and a red wire to the floor, with careful placement to ensure the alarm works correctly.
- 💧 The flood alarm is tested by simulating a flood condition, where the rising water level causes the alarm to sound, indicating a high water level.
Q & A
What is the main purpose of the simple flood alarm being made in the script?
-The main purpose of the simple flood alarm is to detect floods early so that people can be alerted in advance when a flood occurs.
What are the materials required to make the flood alarm according to the script?
-The materials required include a single-use battery, wire, scissors, a stick, string, a small and large diameter straw, plastic wrap, aluminum foil, and a marker.
What is the size of the box that needs to be made for the flood alarm?
-The size of the box is 3 cm by 4 cm, meaning it is 30 cm long and 4 cm wide.
How far apart should the two points be that are marked on the box?
-The distance between the first and second points marked on the box should be 4 centimeters.
Why is it recommended to ask for adult help when using a cutter in this project?
-It is recommended to ask for adult help when using a cutter because it can be dangerous, and children should be supervised by an adult to ensure safety.
What is the length that the large diameter straw should be cut to?
-The large diameter straw should be cut to a length of 10 centimeters.
How long should the small diameter straw be cut for the flood alarm?
-The small diameter straw should be cut to a length of 16 centimeters.
What is the purpose of the aluminum foil and styrofoam in the flood alarm project?
-The aluminum foil and styrofoam are used to create a barrier that will be affected by the rising water level, triggering the alarm when the water reaches a certain height.
How are the battery and wires attached to the styrofoam in the flood alarm?
-The battery and wires are attached to the styrofoam using glue and are positioned such that the wires will make contact when the water level rises and the floating straw touches the upper styrofoam piece.
What happens when the water level rises and the small straw touches the upper styrofoam piece in the alarm?
-When the water level rises and the small straw touches the upper styrofoam piece, the buzzer will automatically sound, indicating that the water level has risen and a flood is occurring.
What is the final step to test the flood alarm after assembling all the parts?
-The final step to test the flood alarm is to simulate a flood by pouring water into the container and observing if the alarm sounds when the water level reaches the trigger point.
Outlines
🔧 Introduction to Flood Alarm Project
The video begins with an introduction to a DIY flood alarm project by School Center Sekolah Pembangunan Jaya, featuring Mr. SQ. The main objective of the project is to create a simple flood alarm to detect rising water levels early. The necessary materials include a single battery, wire, scissors, a stick, string, a small and large diameter straw, aluminum foil, and a marker. The first step involves creating a box with dimensions of 3x4 cm. After making the box, specific points are marked at a distance of four centimeters apart. The video then proceeds to demonstrate how to make holes in the box using a cutter, emphasizing the need for adult supervision due to the potential danger of the tool.
📏 Crafting the Alarm Structure
The second paragraph details the process of cutting a large diameter straw to a length of 10 cm and a smaller one to 16 cm. The straws are then prepared to be inserted into the holes made in the box. The video demonstrates how to stand the straws upright using tape and a marker to ensure they are straight. Next, the largest straw is inserted into the hole, leaving about 1 cm of the straw exposed above the box. The edges are then sealed with tape. The video also shows how to attach a piece of styrofoam and aluminum foil to the structure, securing them with tape. The process is carefully explained, with reminders to wait for the tape to dry before proceeding.
🔌 Wiring the Flood Alarm
Paragraph three focuses on the electrical assembly of the flood alarm. It begins with the preparation of the electrical components, including connecting a black wire from the battery to the base and a red wire to the floor. The video instructs viewers to connect the red wire to the engineer, ensuring a complete circuit. The assembly is then tested by attaching the battery, and the video demonstrates how to attach the battery and wires to the styrofoam using tape. The process includes attaching the black and red wires to the bottom and top of the styrofoam, respectively, and securing them with tape. The video concludes with a test to ensure the alarm is functional and ready for use.
💧 Testing the Flood Alarm
The final paragraph demonstrates the testing of the flood alarm. It explains that the alarm works by detecting the rise of water levels. When the water level reaches the top of the styrofoam, the small straw will touch the longer straw, triggering the buzzer to sound, indicating a flood. The video shows a simulation of a flood by pouring water into the holes of the alarm. As the water level rises, the alarm is triggered, and the buzzer sounds, signaling that the alarm is working effectively. The video concludes with a reminder to always be prepared and to seek help when needed, and it invites viewers to join more experiments in future School Center videos.
Mindmap
Keywords
💡School Center
💡Flood Alarm
💡Materials
💡Measurement
💡Cutting
💡Straw
💡Glue
💡Styrofoam
💡Aluminum Foil
💡Electrical Circuit
💡Simulation
Highlights
Introduction to creating a simple flood alarm with Mr. SQ.
Purpose of the flood alarm is to detect floods early.
List of materials needed: single battery, wire, scissors, glue, straws, tape, Styrofoam, plastic wrap, aluminum foil, and a marker.
Instructions to create a 3x4 cm box for the alarm casing.
Marking points on the box for future assembly steps.
Cutting the box with a cutter, emphasizing safety with adult supervision.
Marking and cutting the straws to specific lengths for the alarm mechanism.
Assembling the straws and ensuring they stand upright within the box.
Attaching the straws to the box with glue for stability.
Preparing the Styrofoam and aluminum foil for the alarm's float mechanism.
Instructions on attaching the Styrofoam and aluminum foil to the straws.
Setting up the electrical circuit with the battery and wires.
Connecting the red and black wires to the battery and the alarm buzzer.
Securing the wires and battery to the alarm box with glue.
Final assembly and testing of the flood alarm in a simulated flood condition.
Demonstration of the alarm's functionality when the water level rises.
Conclusion of the flood alarm creation tutorial with a reminder to seek adult help if needed.
Transcripts
yo yo
cewek
Halo semua apa kabar kembali lagi dengan
school center sekolah Pembangunan Jaya
kenalkan nama bapak SQ dan Pada
kesempatan ini kita akan membuat alat
peraga alarm banjir sederhana tujuannya
membuat alarm hanya
yaitu agar kalian ketika
terjadi banjir kalian bisa mendeteksinya
lebih awal
Oke Langsung aja kita ke alat dan bahan
yang dibutuhkan
ada baterai single dan kancing
baterai kemudian ada gunting
Sumpit ada
garis ada
Hai
steropong ada flash plastik ada
lem tembak ada sedotan yang diameter
kecil dan diameter besar biasanya
alumunium foil dan aja spidol
Baiklah langsung saja kita masuk ke
langkah kegiatan
Baiklah Langsung aja kita masuk ke
langkah yang pertama membuat
alarm banjir Nah kita siapkan dulu
ya dan tutupnya kalau kalian lihat di
sini di sini ada kotak
nah kalian nanti bikin kotak ini
ukurannya adalah tiga kali 4 cm
berarti panjang Irfan lebarnya 30
Hai kemudian kalau kalian lihat di sini
ada juga titik
Setelah kalian bikin kotak di sini
kalian bikin juga titik ini nah Jarak
antara titik pertama ke titik kedua ini
Empat senti
[Musik]
Baiklah Langsung aja kita mulai yaitu
kita akan melubangi
kotak yang ada di tutup toples ini yang
ukuran 4kg 3 cm dengan menggunakan
cutter nah padesky
himbau bahwa penggunaan kateter ini
kalian lebih baik meminta bantuan orang
dewasa meminta bantuan Papa meminta
bantuan Mama karena ini sangat berbahaya
Tia OK kita mulai aja
hai eh kita mulai mengubah ini sini
[Musik]
Baiklah sudah kita
Ayo kita lubangi
seperti ini jadinya kotak ini
nah kemudian langkah selanjutnya
kita akan melubangi lagi yaitu titik
yang ada disebelah sini
Hai Anjing ada dua titik kita akan
lubangnya disiangi sebelah kirimu
Hai
Sebesar apa nanti lubangnya akan sebesar
diameter sedotan yang ini diameter
sedotan besar
[Musik]
Hai setengahnya segini
Hai
Syiah sudah dilubangi dan
sedotannya sudah bisa kita masukkan
Oke selanjutnya kita siapkan sedotan
berdiameter besar yang sedotan dan
dengan diameter yang kecil dan sempit
namun Cup sepenting diameter besar kita
ukur dia 10 cm
KYT
identik Cak
sini kau pria
di sepanjang 10 cm Benci Tapi tanda
disini
kemudian the gunting
hai oke sudah diberi tanda kita gunting
Oke
kemudian yang sedotan kedua diameter
kecil ini
kita ukur panjangnya 16 cm2
itu pertanda
kemudian kita gunting kain
Hai
Yeh Din Sumpit Sumpit itu
kita ukur panjangnya 10 cm
panjangnya 10 service
Hai selangkangan di bawah supaya mudah
Korea
ini kita beritanya
hai hai
[Musik]
hai hai
[Musik]
Hai 10 senti di 10 centini 16 cm
Ki sekarang kita ambil
Sumpit yang sudah dipotong kemudian kita
letakkan di titik yang ada ya sudah kita
beri Tante tadi steam ini ya lurus ya
kita
kita dirikan
lurus jangan sampai miring-miring
Hai banget
kmudian kita lem tembak supaya dia bisa
berdiri
[Musik]
Nah kita lihat setelah tadi kita lem
tembak dibagian bawahnya sekarang sudah
kering kemudian langkah selanjutnya kita
siapkan sebutan ini terbesar kita
masukkan ke
lubang yang sudah disediakan ya
oke nah kita masukkan tapi Sisakan
diatas Sisakan
sedotan ini di atas kurang lebih satu
sentimeter di atas ya kurang lebih 1 cm
di sini kemudian pinggirnya kita
berikan lem tembak
[Musik]
oke baiklah kita tadi sudah
lem tembak-tembak dan sekarang sudah
kering selanjutnya kita akan tetap kita
seneng-seneng yang pertama itu kita
siapkan sedotan yang diameter kecil
kemudian ada sterofom di sini
kita letakkan di tengah-tengahnya
kemudian kita by supaya
lebih mengelilingi
[Musik]
Halo
sesok sambil menunggu ini kering
kemudian kita lihat di sini ada
styrofoam kemudian di sini ada aluminium
foil by ingin menempel sini seperti ini
Nah dengan menggunakan genteng
oke ya beri lem tembak
[Musik]
hai sedikit saja tidak usah tidak perlu
banyak-banyak kamu
[Musik]
Hai seperi di pinggirannya
[Musik]
hai hai
Oh ya cukup
Letakkan
diatasnya ini juga
[Musik]
Hai semuanya kita tunggu kering dan
selanjutnya ini juga ada sterofom ke
lebih enak sih
hai hai
cukup
install akan
sebelumnya fly di atasnya hati-hati lem
tembaknya panas jangan sampai terkena
lem
[Musik]
Hai tipe sudah kering kita singkirkan
dulu ya kemudian kita ambilnya gini dan
kita lepas
three
nah kemudian kita masukkan dari bawah ya
eh
Hai mungkin itu kita masukkan dari bahwa
[Musik]
agenbni46 nya kita tempel dia dengan
sterofom gini kita
apa namanya kita lem dengan Lenteng
sih
Hai Nikita harus
[Musik]
tampilannya namanya seperti ini
kalau kamu tidak ke suara kalau kamu
menemukan kesulitan boleh minta bantuan
dengan
manfaat ngomongnya biar lebih mudah
Rizky bisa sendiri Tapi kalau kamu
kesulitan kamu bisa minta bantuan orang
lain
[Musik]
untuk membantu and tembak dibagian bawah
hai hai
Hai lihat sini sudah kering Ya sudah
nempel dan segini nanti jadinya
Hai Oke selanjutnya ciptakan pasang yang
xeroform ini ke Sumpit
Cara pasangnya seperti ini
kemudian nanti di lem tembak
[Musik]
Hai Oke
kalau kalian kesulitan kalian bisa minta
tolong orang dewasa ya Papa atau Mama
[Musik]
Kin sekarang sudah kering seperti ini
kemudian kita masukkan ke
Hai ini
kita bincangkan
Hai
Baiklah selanjutnya kita akan merangkai
rangkaian listrik kita langsung saja
kita mulai
masang kabelnya dimana kabel hitam dari
baterai
[Musik]
kabel dan
[Musik]
hai hai
hai hai
[Musik]
hai hai
hai hai
ampuh
[Musik]
ingin kau disini kita siapkan kabel
merah ke Sambungkan dengan kabel merah
yang ada di lantai
Hai
[Musik]
najmuddin kiri cabe merah ini kita
sambung lagi ke kabel
Insinyur ini
hai hai
hai hai
[Musik]
Hai Oke sudah selesai rangkaiannya Giant
kita akan tempelkan nya di toples
baterainya blazer dan kita tempel juga
kabel yang
merah dan hitam bunyi untuk hitam itu
dia di di bawah mimpi sterofom yang
bawah model untuk merah setempel dia di
sterofom yang atas sini
kita buka
oke baiklah kita tempel saja dengan
menggunakan lem tembak
kita akan menempel baterai
[Musik]
MPEG4 kan sih
Oh
ya kemudian kita
ngajerit
gini kita lem dulu dengan
[Musik]
nempel disini dan
Hai ini sudah
Nah Dian di sini ada kabel hitam dan
merah
dimana kabel hitam ini Kita tempel di
bawah ya kalau kalian lihat sini ya dan
praktikkan di bawah kemudian kabel
merahnya ini kita tempel di atas
[Musik]
kita sudah jadi
[Musik]
Hai alatnya juga sudah jadi hal
Hai mendeteksi alarm Lancip sini kita
lihat aja baterai sebagai sumber
ngetik jangan kemudian si ada bazar jadi
ketika Nanti airnya sudah
KMU tinggi Widya henti negeri ini akan
bunyi memarkan bunyi bahwa pertanda
bahwa
air sudah naik tinggi
itu oke sekarang Langsung aja kita coba
simulasikan disini kondisi dimana
akhirnya kosongnya kondisi dimana air
kosong berarti kondisi dimana dia itu
belum banjir
Biasanya kan kalau banjir itu berarti
permukaan air di sini kita udah siapkan
air
Nah langsung aja kita tuang ini simulasi
jika terjadi banjir yaitu naiknya
permukaan air kita tuangkan di lubang
yang sudah kita
ditutup yang sudah kita lebih the mulai
[Musik]
Hai
[Musik]
[Musik]
nah sebelum sampai ke atas barizki
Jelaskan dulu
disini ketika air sudah naik kepermukaan
sterofom yang ini lama-lama makin keatas
makin mendekati sterofom yang panjang
diatas
semakin tinggi permukaan air semakin
naik juga
sterofom yang kecil ini nanti dia akan
menyentuh stereo panen atas Ketika nanti
sudah menyentuh diatas maka bazer
otomatis akan bunyi maka menunjukkan
bahwa
banjir
permukaan yang sudah tinggi naik karena
bazarnya menyala berarti ini akan
memberikan peringatan pada orang-orang
yang ada di rumah atau yang ada di
lingkungan tersebut bahwa telah terjadi
banjir
lanjutkan ya kita akan coba tambahin
airnya ini
[Musik]
hai hai
MP3
Oh
ya seperti itu
melihat bahwa disini blazernya telah
berbunyi
hai hai
Oh baiklah demikianlah percobaan kita
pada hari ini dari school center sekolah
Pembangunan Jaya yaitu membuat alarm
banjir sederhana Sampai jumpa kembali di
percobaan-percobaan school center
berikutnya
dadah er
[Musik]
Посмотреть больше похожих видео
CARA MEMBUAT ALARM BANJIR SEDERHANA
2nd alarm, itinaas sa Marikina River; mga residente, nagsilikas | 24 Oras
How To: EC2 Email Alarm Using CloudWatch (3 Min) | AWS EC2 CloudWatch Threshold Alert SNS Alarm
Oily water seperator | Bilge water seperator | Oil and water Seperator
Using Alpha Radiation in Smoke Alarms - GCSE Physics | kayscience.com
Engine Safety System
5.0 / 5 (0 votes)