SENI GRAFIS CETAK TINGGI - CUKIL LINO

Summary

In this video, Sefian demonstrates the process of creating a piece of art for his final project. Using a combination of rubber, black ink, and pencil, he begins by sketching his design on paper, then carves the rubber to remove areas that won’t hold ink. After applying ink with a roller, the design is printed onto a larger sheet of paper. The result showcases the final print, and Sefian concludes by thanking the viewers and apologizing for any mistakes in the process.

Takeaways

• 😀 The video is presented by Sefian, who is fulfilling his final assignment in his art course.
• 😀 The art project involves creating a print using a linoleum carving tool, black ink, and pencil.
• 😀 The first step in the process is sketching the design on paper with a pencil.
• 😀 Sefian uses a pre-prepared reference image to help with the sketching process.
• 😀 After sketching, the next step is carving out the areas that will not be inked, leaving raised sections.
• 😀 The carved linoleum is then covered with ink using a roller to ensure an even layer.
• 😀 Care is taken to apply the ink evenly across the entire surface of the linoleum block.
• 😀 The next step involves printing the design onto a larger piece of paper.
• 😀 Sefian uses tape to press the paper onto the inked linoleum to ensure the print is transferred clearly.
• 😀 Once the print is successfully made, Sefian reveals the final print and shares the completed artwork with viewers.
• 😀 Sefian acknowledges that there may be mistakes in the process and apologizes for any imperfections in the artwork.

Q & A

What is the main objective of the video?

The main objective of the video is to demonstrate how to create a piece of artwork for a final college assignment using rubber carving and ink printing techniques.

What materials are used in this artwork process?

The materials used in this artwork process include a pencil, black ink, carving tools, and rubber (referred to as 'karet Linux').

What is the first step in creating the artwork?

The first step is to sketch the design using a pencil on paper, with a reference image to guide the process.

Why is the sketch made on a separate sheet of paper?

The sketch is made on a separate sheet of paper to use it as a reference for the carving process, making it easier to transfer the design onto the rubber.

What is the purpose of carving on the rubber material?

The purpose of carving on the rubber is to create areas that will remain uninked, forming the positive parts of the design, while the carved areas will be the negative spaces.

How is ink applied to the carved rubber surface?

Ink is applied to the carved rubber surface using a roller. The ink is spread evenly over the rubber, ensuring that it covers all the non-carved areas.

What method is used to transfer the inked design onto the paper?

The inked rubber is pressed onto a larger sheet of paper using a tool, in this case, tape, to ensure an even and clear transfer of the design.

Why is tape used during the printing process?

Tape is used to help press the paper onto the inked rubber, ensuring the ink transfers properly and the design prints clearly without slipping.

What happens after the ink is successfully transferred to the paper?

After the ink is transferred to the paper, the rubber sheet is lifted, revealing the final printed design.

What does the creator mention at the end of the video?

At the end of the video, the creator thanks the viewers, apologizes for any mistakes or shortcomings in the process, and signs off with a farewell.