Cara menggunakan scanner launch

Summary

In this instructional video, Muhammad Sampil demonstrates the use of a scan tool for diagnosing and repairing issues in a Suzuki car. He begins by connecting the scan tool and opening the X431 application, selecting the relevant settings for Suzuki vehicles. Upon identifying a problem with the intake air temperature sensor, he proceeds to fix it and clears the error codes. The video includes a step-by-step guide on troubleshooting, fixing the issue, and verifying the repair by checking the data stream. The session concludes with the car returning to normal operation.

Takeaways

• 😀 The practice session begins with an introduction and setup of the scan tool.
• 😀 The scan tool is connected to the car, and the X431 application is opened to start the diagnostic process.
• 😀 The system used for diagnosis is selected manually, and the ECM (Engine Control Module) is chosen for scanning.
• 😀 The scan reveals a trouble code related to the intake air temperature sensor circuit.
• 😀 The car is turned off to begin fixing the identified issue with the intake air temperature sensor.
• 😀 After addressing the issue, the components are reinstalled, and the car is restarted to check for any remaining issues.
• 😀 The trouble code is cleared by selecting the option to delete the fault code from the system.
• 😀 The data stream is checked to ensure that the intake air temperature and battery voltage are within normal parameters.
• 😀 The normal intake air temperature is 34°C, and the battery voltage ranges between 13 to 14 volts after the repair.
• 😀 The car is turned off, the scan tool is disconnected, and the practice session concludes with a polite thank you and a closing greeting.

Q & A

What is the first step in using the scan tool according to the transcript?

The first step is to open the car stack section and then install the scan tool.

How is the scan tool connected to the car?

The scan tool is connected via a scan tool connector.

What application is used for the scan tool in the transcript?

The X431 application is used for the scan tool.

What is the process of selecting the vehicle's make in the scan tool application?

The user selects 'local', then chooses 'Asian' because the car is a Suzuki, and finally selects 'Suzuki' in the application.

What system is chosen after selecting the vehicle's make?

After selecting the vehicle's make, the user selects 'manual', then chooses the 'full system L', and finally selects the ECM (Engine Control Module).

How is a potential car issue identified during the diagnostic process?

A potential issue is identified by clicking on the red code, which shows if there is any trouble with the car.

What issue was found with the car during the diagnostic process?

The issue found was related to the intake air temperature sensor circuit being high.

How was the issue with the car fixed?

The issue was fixed by turning off the car, locating the fault, and reinstalling the intake air temperature sensor.

How is the code or trouble removed after repairing the car?

After the car is repaired, the code or trouble is removed by clearing the fault code using the scan tool.

What data was checked after the car repair to ensure normal operation?

After the car repair, the intake air temperature and battery voltage were checked. The normal intake air temperature was 34°C, and the battery voltage was between 13 to 14 volts.