3D saddles - before you buy , watch this
Summary
TLDRThe video discusses the benefits and challenges of 3D printed bicycle saddles, highlighting the hype in the cycling industry. It covers the importance of saddle shape, shell width, curvature, and perineum cutouts in achieving comfort. The host tests a budget-friendly 3D printed saddle from AliExpress, comparing it to more expensive brands, and finds it performs well over long rides. Key takeaways include matching saddle shape to personal preferences and ensuring precise bike measurements for comfort. The video concludes that higher cost doesn't necessarily mean better comfort, with budget options also providing excellent performance.
Takeaways
- 🛍️ The cycling industry is promoting 3D printed saddles as a solution to cycling discomfort, available on various online platforms like AliExpress, Amazon, and eBay.
- 🔍 To find a suitable saddle, one should try it in the same position as the old one and go for a long ride to test comfort.
- 💰 Branded saddle manufacturers invest in R&D, resulting in higher prices, but there are cheaper alternatives available that offer similar benefits.
- 🔑 The key to a comfortable saddle is the shape of the shell underneath the padding, which dictates comfort more than the 3D printed top layer.
- 👍 The narrator found a 3D printed saddle from AliExpress under the Riot brand, which was inexpensive and had positive reviews.
- 🌡️ 3D printed saddles have perforated surfaces, which can increase airflow and reduce chafing but may also collect dirt and water.
- 📏 The width of the saddle, from the widest part to the other side, is crucial for ensuring a proper fit.
- 📏 The curvature of the saddle, whether flat or round, affects comfort and personal preference plays a significant role in choosing the right shape.
- 🕳️ The size of the perineum cutout or channel can affect comfort, with larger cutouts leaving less surface area to sit on.
- 🦵 The width of the saddle's nose can prevent thigh chafing for those with wider thighs, and personal experience can dictate preference.
- 🛠️ The flexibility of the saddle's shell material, whether plastic, glass fiber, or carbon fiber, can impact comfort, especially on rough terrain.
Q & A
What is the main topic discussed in the video script?
-The main topic discussed in the video script is the use and evaluation of 3D printed bicycle saddles, their benefits, and how to choose the right one for cycling comfort.
Where can 3D printed saddles be purchased according to the script?
-3D printed saddles can be purchased from various online platforms such as AliExpress, Amazon, eBay, and other online bicycle parts sellers.
What is the importance of trying out a saddle before committing to buy?
-Trying out a saddle before buying is crucial to ensure it provides comfort during long rides. It helps to avoid spending money on multiple saddles that may not be suitable.
What are some of the brand names mentioned in the script that manufacture 3D printed saddles?
-The brand names mentioned in the script that manufacture 3D printed saddles include Specialize, Physique, Sellia, and a few others.
Why do brand name 3D printed saddles tend to be more expensive?
-Brand name 3D printed saddles tend to be more expensive because they invest significantly in research and development, which contributes to their higher price.
What is the brand and where was the saddle reviewed in the script purchased from?
-The saddle reviewed in the script was purchased from AliExpress and is from the brand Riot R, ye T.
What is one of the advantages of a 3D printed saddle's perforated surface?
-One advantage of a 3D printed saddle's perforated surface is increased airflow, which can lead to a drier and less chafed area for the cyclist.
What is the importance of the saddle's shell in determining comfort?
-The saddle's shell is crucial in determining comfort as it provides the foundation and shape of the saddle. If the shell's shape is not suitable for the individual, the saddle will not be comfortable regardless of other factors.
What are some factors to consider when choosing the width of a saddle?
-Factors to consider when choosing the width of a saddle include personal comfort, the most common size which is 143mm, and the availability of wider or narrower options to suit individual needs.
What does the script suggest about the relationship between price and comfort in saddles?
-The script suggests that there is no direct correlation between price and comfort in saddles. A more expensive saddle does not necessarily guarantee comfort, and cheaper alternatives can also provide a good fit and comfort.
What is the significance of the saddle's flexibility in terms of riding experience?
-The flexibility of a saddle is significant as it can affect the riding experience, especially on rough terrain. A softer saddle can act like suspension, absorbing more vibrations and reducing harshness and fatigue on the cyclist's backside.
Why is it important to ensure the saddle's shell does not stick out further than the cushioning?
-It is important to ensure the saddle's shell does not stick out further than the cushioning to prevent chafing or leg irritation, as the legs or thighs could rub against the harder plastic or carbon fiber instead of the cushioning.
What is the role of the seat rails in the overall comfort and functionality of a saddle?
-The seat rails play a crucial role in the overall comfort and functionality of a saddle. They need to be compatible with the seat clamp and provide enough adjustment range for the cyclist to find the optimal position. The rails also contribute to the saddle's weight and stiffness.
What is the significance of the saddle's profile height in relation to the seat post?
-The saddle's profile height is significant as it affects the height at which the seat post needs to be set. A lower profile saddle may require the seat post to be raised to maintain the same riding position.
How does the script suggest measuring and transferring saddle settings from one bike to another?
-The script suggests using a sit bone template or other measuring tools to record the height, length, and tilt of the saddle. These measurements can then be transferred to another bike to ensure a consistent and comfortable riding position.
What was the outcome of the test rides with the 3D printed saddle from Riot R, ye T?
-The test rides with the 3D printed saddle from Riot R, ye T were positive. The cyclist found the saddle comfortable even after long rides and did not experience any discomfort or chafing, leading to the decision to keep it as a permanent saddle on the bike.
Outlines
🚴♂️ Exploring 3D Printed Saddles for Cycling Comfort
The video discusses the growing trend of 3D printed saddles in the cycling industry and their availability on various online platforms. It emphasizes the importance of trying out a saddle to ensure comfort during long rides. The narrator shares their experience with a Riot R brand saddle from AliExpress, which was not only affordable but also received positive reviews. The video highlights the unique features of 3D printed saddles, such as perforated surfaces for better airflow and reduced chafing, but also mentions potential issues like dirt accumulation in wet conditions. The narrator also touches on the significance of the saddle's shell shape, which dictates comfort, and the fact that brand name saddles may not necessarily fit everyone, leading them to explore cheaper alternatives.
🔍 Comparing Saddles: Shape, Width, and Relief Features
This paragraph delves into the various aspects to consider when choosing a saddle, starting with the shape of the shell and its impact on comfort. It compares different saddle shapes from well-known brands like Specialized, Physique, and Selle, noting that they may not be suitable for everyone. The narrator introduces a 3D printed saddle that fits their preferences better than the mentioned brands. The summary also covers the importance of saddle width, the curvature of the saddle's surface, and the presence of a perineum cutout or channel, which can affect comfort. The narrator shares their personal preferences regarding these features and provides guidance on selecting the right saddle width and relief channel based on individual needs.
🛠️ Understanding Saddle Components and Rail Considerations
The narrator discusses the technical aspects of saddles, including the width of the saddle's nose, the flexibility of the shell material, and the importance of matching the saddle rails with the seat clamp. They explain that a saddle's nose width can affect thigh comfort and that the shell's flexibility is crucial for absorbing vibrations on rough terrain. The video also addresses the compatibility between carbon fiber rails and seat clamps, highlighting the need for the correct clamp size to avoid damaging the saddle. Additionally, the narrator mentions the practicality of having a numbered scale on the saddle rails for precise seat positioning and the craftsmanship of the Riot saddle, including its carbon fiber construction and flexibility.
📏 Measuring and Installing the New 3D Printed Saddle
The paragraph provides a step-by-step guide on measuring and transferring the correct height, length, and tilt of a saddle from one bike to another. It introduces a tool for marking the sit bone position and emphasizes the importance of accurate measurements for a comfortable riding experience. The narrator demonstrates the process of adjusting the new Riot 3D printed saddle on their YOLO R11 bike, ensuring that the saddle's position matches that of their previous bike. They also discuss the adjustments made to achieve the desired tilt and the importance of not rushing the process to ensure a perfect fit.
🚴♂️ Testing the 3D Printed Saddle on Long Rides
The narrator shares their experience testing the new 3D printed saddle on extensive rides, covering distances of up to 103 kilometers with minimal climbing. They report no discomfort or issues with the saddle, even after multiple rides and different pairs of cycling shorts. The video concludes with the narrator expressing satisfaction with the saddle's performance and comfort, highlighting that a higher price does not necessarily equate to better comfort. They also mention a $12 saddle from AliExpress as an example of great value for money, reiterating the importance of finding a saddle shape that fits personal preferences rather than focusing solely on brand names or cost.
Mindmap
Keywords
💡3D printed saddle
💡Cycling discomfort
💡Brand name saddles
💡Saddle shape
💡Perforated surface
💡Saddle width
💡Perineum relief
💡Saddle flexibility
💡Rails
💡Saddle height and tilt
💡Value for money
Highlights
3D printed saddles are gaining popularity in the cycling industry and can be purchased from various online platforms.
To find a comfortable saddle, it's recommended to replace the old one with a new one in the same position and go for a long ride.
Brand name 3D printed saddle manufacturers invest significantly in research and development, resulting in higher prices.
There are cheaper alternatives to brand name saddles that offer good quality and are worth considering.
The 3D printed saddle from AliExpress under the Riot brand was found to be extremely affordable and well-reviewed.
The weight of the Riot saddle is 150g, which is impressively light compared to its packaging.
3D saddles have perforated surfaces, which can increase airflow and reduce chafing but may also accumulate dirt.
The shape of the saddle's shell is crucial for comfort, and it should be chosen based on personal fit.
Width of the saddle is important and varies among models, so it should be measured and chosen according to personal preference.
The curvature of the saddle can be flat or round, and personal comfort may vary based on this characteristic.
The presence and size of the perenium cutout can affect comfort, with larger cutouts providing less surface area to sit on.
The width of the saddle's nose can impact comfort, especially for those with wider thighs.
The flexibility of the saddle's shell material can influence comfort, especially on rough terrain.
Carbon fiber saddles are lighter but may not fit all seat clamps due to their oval-shaped rails.
The distance between the rail and the top of the seat can affect the necessary seat post height adjustment.
Imperfections in cheaper saddles may be negligible and should be weighed against their lower cost.
The firmness of the 3D printed saddle padding can vary across different areas, providing tailored comfort.
Ensuring the saddle's shell does not protrude beyond the cushioning prevents chafing and discomfort.
Using a sit bone template can help accurately mark where sit bones will be on a new saddle.
Recording and transferring vital saddle measurements from one bike to another ensures a comfortable fit.
The narrator's personal experience with the Riot 3D saddle indicates a high level of comfort and satisfaction.
A $12 saddle from AliExpress has proven to be a great value for money and comfortable, challenging the notion that more expensive equals more comfortable.
Transcripts
e
[Music]
[Music]
[Music]
get yourself a 3D printed saddle and all
your cycling discomfort problems will be
solved it seems to be the hype at the
moment doesn't at the 3D printed saddle
well at least the cycling industry would
like you to think that way you can buy
them from AliExpress fugo Amazon eBay
plus all your usual online bicycle parts
sellers so surely with such an abundance
there must be something in it they must
be able to solve your saddle problems
well we all know the best way to try out
a saddle for you to see if it's any good
is take off your old saddle from your
bike put on the new saddle in exactly
the same position and go for a long
ride if the Settles comfortable bang
you're on a winner you've got the right
saddle if not well you're going to have
to try another one try another one and
try another one and keep on trying and
so you're on a merry go round trying all
these different Saddles not only that
you're spending lots of money so what do
you do well hopefully in this video
we're going to narrow that field right
down for you before you even need to
commit to buy so let's get on with it
well there are quite a few brand named
settle manufacturers like specialize
physique sellia and a few others and
they put quite a bit of research and
development into the 3D printed saddle
and that's why their price tends to be
significantly higher than your standard
saddle but there are also copies out
there on the market copies of not only
those brand name ones but a lot of
variations thereof some of those
variations are very very good and the
best thing about it is those variations
are a lot cheaper than the brand name
ones well you might reason just buy a
brand name 3D printed saddle the price
might be higher but at least it's going
to fit you like a glove well that's also
not necessarily so and the reason is the
3D printed padded part is only like the
top layer this top layer with the foam
underneath the padding underneath but
that sits on the hard plastic or carbon
fiber bit the shell now if you like me
none of those brand names make any
models that fit me so I had to look
elsewhere anyhow and so I looked to the
other variations available on the market
and I found this so This saddle is from
AliExpress and the brand name is Riot R
ye T and it was extremely cheap so I
thought I'd have a look at the reviews
and all the reviews were glowing really
good so I took the
plunge the weight of this Riot seat is
150 g to give you an idea how light that
is the cardboard box and the minimal
amount of packaging that this seat came
in weighs 126
G now the first thing you might notice
about 3D settle compared to your
standard settle is it's got holes in it
the surface is perforated so that can
mean two things first of all there's
more air flow underneath because you got
holes there so more air means a drier
shammy means less chafing so that's one
big plus however having holes can also
mean in wet weather when there water and
of course in the water is dirt flicking
up and getting onto the seat it can mean
that dirt can build up inside those
holes now over time it may do so you can
tip your bike on the side or upside down
and give it a squirt with water and let
the dirt run out it won't hurt the 3D
settle padding and and it will dry out
and then you'll be right the most
important part of the seat which you're
going to be looking for is the shell the
underneath it not only provides the
foundation for the material to glue onto
and for your rails to connect but it is
the shape of your seat the shell gives
it its shape and it's the shape that
dictates the Comfort if the shape of the
shell is not right for you then no
matter what else you do it's still not
going to be comfortable so here's three
Saddles I know I cannot ride the
physique one here it's like whether it's
diamond or triangular sort of shape that
is definitely uncomfortable for me the
cellia with its long nose and then all
of a sudden it comes out right here and
then goes back very quickly and whatever
else it's it's a bit better but it's
still I can't ride with it more than 60
km
and then this is specialized same sort
of thing it might be wide enough but
it's got a its shape is not right it's
too wide before it slopes off anyway
we'll talk about that a minute so either
of these Saddles all three of them
definitely not comfortable for me
whereas the 3D printed saddle that I got
is nothing like those three Saddles but
it is like the other seats that I ride
on my bikes second most important aspect
of your shell is the width of the seat
goes from the widest part of the seat to
the widest part so just get a measure
and go straight across there the most
common size is 143 however there are
wider ones and there are narrower as
well so get your width correct if you're
not sure what width of seat you should
take then watch this video here I'll put
the link in the description and that'll
help you determine what width seat is
best for
you next is how flat or round your seat
is all it means if you put a straight
rule across your seat across there like
that
what is the curve like here with this
seat you can see the curve goes off
really quickly it's curving all the way
almost from the center just out from the
center it starts curving off really
quickly this one here however you can
see it stays flat for a long time before
it starts to gradually curve off it's
not till it's way out here before it
starts to drop off quite significantly
so this one what is what I'd call a flat
saddle and this one is what I would call
A round saddle so you might find the
rounder shape more comfortable or a
flatter shape more comfortable or
somewhere in between and here's my 3D
printed sadle it's sort of somewhere in
between next is the perenium or
perennial cutout that's the hole in the
middle if it's not a hole then it might
be just a channel like this
one either way the seat has usually got
them today now this one is a large one
it's quite large at the back and it's
quite long overall it's a big large
cutout in the middle so it doesn't leave
much surface seat to actually sit on for
the rest of your body it's a big cutout
whereas this one is a small cutout you
can see the surface area on the seat
it's a lot more for you to sit on than
there is with this one so you might find
the seat with the large cutouts more
comfortable than the smaller cutouts or
vice
versa there's a few other things you
could consider about the perenium cutout
like how the rollof is on the side sides
if it's sharp or is it soft or is it
firm but we won't go into detail about
that if you get it close enough to the
seat that you already have then you
should be pretty much right personally
with the 3D SLE I've got I've gone for
not too long and not too wide sort of in
between if you're not sure about
perenium relief Channel what fits you
then just go for something like this in
between next is the width of the nose
here's a wide nose and here's a narrower
nose now if you do have trouble with
your thighs catching on the side and you
need a narrower nose you'll already know
about that from previously writing so
having wider thighs then you'll need a
narrower nose seat if it doesn't worry
you then you could probably get away
with either the narrow or a wider nose
for me I've never had a problem with
narrow or wide nose Saddles so I've just
gone for that one it's fairly wide but
not overly if you find a wide nose sadle
doesn't worry you check inside the
inside leg of your Nicks it might be
worn away or on the inside of the seat
here you might have wear marks you don't
know but it's actually wearing on The
Wider nose so you might be better off
with a slightly narrower nose seat even
if you don't feel the discomfort it
could be wearing away your Nicks or the
side of your seat and then there's the
Shell's flexibility plastic seats or
glass fiber seats tend to be more
flexible like this one you can see it
flexes quite well whereas a carbon fiber
shell like this one doesn't matter how
hard you press you can hardly move it so
they tend to be a lot harder now this
this one that I've got the 3D printed
saddle is carbon fiber underneath that's
why it's so light but it does have some
flexibility now it may not have it in
the description when you buy the seat
because flexibility is something that
quite often is not advertised so
sometimes it might be a bit of a gamble
however generally carbon fiber is a
stiffer shell than a plastic or a glass
fiber shell so why consider flexibility
because if you ride mostly on rough
terrain then you'd be better off with a
softer sh
that way it acts like suspension it'll
absorb more vibration and you won't find
it so harsh and fatiguing on your
backside whereas if you ride on normal
smooth rows or on the vrone then it
won't matter you can go for a hard
carbon fiber saddle this one that we got
the 3D printed saddle that's sort of
halfway in between it's carbon fiber but
it does have some
flexibility now with the rails
underneath your seat there is one
important thing you need to consider and
it's to do with your seat clamp not all
seat clamps take carbon fiber rails for
instance this is a steel or actually
it's Chromo Rail and if you to measure
the diameter all the way around it's 7
mm and that's the standard size so
that'll fit any seat clamp however with
carbon fiber you measure this way and
it's seven but you measure it this way
or this way however way you want to do
it and it's 9 mm so it's oval shaped and
that won't fit the 9 mm is too big for
most of the standard clamps 7x7 so
you'll need to either purchase another
seat post with the correct clamp or the
clamp fitting so that fits the 7x9
carbon fiber rails so if you go for a
carbon fiber railed seat because it's
light and it looks cool and you go and
put it on your normal seat clamp and you
put too much pressure on or it's the
wrong size it only takes a 7x7 you don't
want to crack those carbon fiber
rails having a look at the rails on this
right seat it has a numbered scale on
the right hand rail very handy when
needing to move the seat forward or back
by small increments and has plenty of
rail to move back and forth is about the
same or more than a cotell SLR and a PR
logo the distance between the rail and
the top of the seat is noteworthy too
the riot is 35 mm tall this specialized
is 45 mm tall this means that the seat
poost will need to go up 10 mm if you're
going from the specialized seat to the
riot the carbon fiber workmanship on
this RI seat is really really nice the
two rear interfaces for the rail to the
shell look very solid and the front
looks very sleek and well made now
because this Riot seat is about a
quarter of the price of a name brand
seat there's bound to be some
imperfections I spotted a very small pin
hole on the left side of the shell and
another very small dent on the right
hand side and a very small spillage of
glue on the right hand skirting I'm sure
these are nothing to worry about but if
you were paying $400 Plus for a seat you
would expect
Perfection having a closer look at the
3D printed layer on top of the shell it
looks the same all the way along and it
feels fairly consistent on light touch
however if you have a very close look at
the pattern on the squares or the holes
or circles whatever you want to call the
pattern from the back to the front it
does vary as you go past your SE bones
along the perenium relief and into the
nose it is different all the way along
and you can feel the difference too if
you start pressing your finger in on the
back of the seat from here it's very
soft and you go forward especially
around the sit bone area it becomes
fairly
firm and as you go along the nose area
it's still fairly firm until you get
close up to round about the end of that
relief Channel and it starts to go soft
to very soft at the end so there is a
difference in the firmness of the
padding from side to side starts off
fairly firm firm and it goes a little
bit sof around where the sit bones
are and then that's about it and it goes
back to firm again toward the end now
every settle's a little bit different
where the exact pressure areas are firm
and soft areas are where you could
probably feel it and draw a little map
if you really so inclined
but we have fa that these people who
make these Saddles know what the fir
where the firm and the soft areas should
be and you'll soon know when you ride it
as well one thing to look for and you
can usually only tell from pictures on
the sites is if your shell is sticking
out further than the cushioning on the
sides if it sticks out too much then
your necks or your legs are going to rub
on the harder plastic or carbon fiber
rather than on the cushioning so make
sure that the edge of the shell doesn't
stick out further than the cushioning so
that'll apply of course where your legs
go past the seat you don't want chafing
or your necks being shredded a Pieces
Just because there's a little bit of
plastic sticking
out and my seat post has the typical 7
mm clamp for the rails and so the hole
for the rails is round the seat post
also came with the 9 mm clamp there it
is 7x9 and so it makes the hole oval
shaped just perfect for the carbon rail
seat seat on do up the seat clamp bolt
so that the seat can tilt but it stays
where I put it so the bolts not too firm
and not too loose using my sit bone
template it's a very handy tool because
on any seat you can pretty much
instantly Mark exactly where your sit
bones are going to be if you'd like to
check it out for yourself make one for
yourself check out diy9 video bike fit
tool make it yourself so now I know
exactly where the center of my sit bone
is going to be on the
seat before removing your old seat and
putting on the new seat measure the
height length and tilt from your sit
bone point or maybe you already have
these measurements written down here I'm
transferring the measurements from my
YOLO R12 to the R11 because the R11 is
going to have the new seat on it from
that sit bone Point measuring the height
and the length you can use a tape
measure or a dedicated sizing transfer
tool like this
chances are you won't have one of those
tools so to measure the Tilt you can
just use a straight piece of metal and
measure from The Handlebar to the bottom
of that piece of
metal for a very accurate measurement of
tilt you can use this tilt tool and you
can make it yourself that same video
will show you how and if you haven't
already don't forget to record your
vital measurements height length and the
tilt
so transferring those measurements over
to the YOLO R11 which has the new Riot
3D seat the tool is showing the seat is
too low by about a CM which is because
the rot seat is about 10 mm lower in
profile than the previous seat so
lifting the seat post by about 10
mil and now the tool says everything's
pretty much spot
on finally getting the tilt of the new
seat the same as the tilt on the other
bike
too high knock the seat down a
bit measure again getting closer but
still a bit too high on the
nose another measure and the nose is
still a fraction too high so we'll knock
it very
gently and I've gone too far so have to
go a little bit
back I'm letting this carry on a bit
because it's very important to have your
tilt exactly right
finally got it
right so tighten those bolts up make
sure they're the right torque and we're
done and ready to
ride so here we go first ride with the
3D settle and I put the camera on the
back as
well lost the Sprint
not very often that
happens young
lad how old are you 23 23 against 59
years
l oh got to give away sometime anyway I
what have we done about 50k and seat
still fine
excellent beautiful haven't even thought
about it
yet these people that say that you can't
move on your seat cuz it's sticky no
problems moving so I don't know what
they're on about maybe their necks are
sticky here's the motor bike here's our
Pacer by the time we get home the well
at the moment it's
72k no problems
whatsoever else is
here cup coffee and then there'll be
another 11k to get home so no it's
fine yeah so
84k today Sunday ride
not bad and no problem whatsoever
lovely more than happy with it actually
I was expecting some something or at
least would I'd need to adjust something
at very first I thought oh I'm going
have to put the nose down I could feel
the nose a little bit at the very
beginning of the ride but during the
ride not so uh and the whole ride
beautiful really really nice so very
happy we are second ride on the 3D seat
new so we do 103k today no climbing much
about 200 M that's about it this will be
the true test that's the halfway stop
now
53k there we go 102 k and just over 300
M climbing very flat course today so
that's the way you test a seat very flat
course when you don't get off your seat
much anyway way oh it's in the shadow
there you go everything's fine no
problems even more a different pair of
necks just in case it's good to wear a
different pair of Nicks cuz some Nicks
feel different than others so John
Holland and they sell tractors or
something the
seat here we go there you go it's
staying on this bike now so it's
replacing the other SE I like it so much
that it's got a permanent home
this is about I don't know I've lost
counting now seven or E ride now with
the
seat here they
come
up so in conclusion if you just remember
two main things first of all get a seat
that is close enough in shape to your
favorite seats I've got a few favorite
ones they're not all the same band or
the same model they're different but
nevertheless they're shaped is very very
similar and I know they're comfortable
for me and that's why they're on my
bikes so the 3D suit I bought as close
as I could to the shapes on my other
ones so get a shape that's close as you
can to your favorite seat secondly is
always have the measurement exactly the
same so if you're riding a road bike
then measure your road bike your tilt
your length and your height exactly the
same as your other road bike and your
other one and your other one and your
other one actually I tell a lie the
gravel bike is slightly smaller than the
road bike I ride a seat slightly lower
and a head stem slightly shorter as well
but that's the gravel bike but all my
road bikes all the measurements are
identical and remember more money does
not equal more Comfort it may buy you a
lighter seat but money has nothing to do
with comfort in fact I've got a $12 seat
over here this one here it's a Vader
from AliExpress $12 I got that about 2
years ago I've been riding it for so
long and I love it it's a really
comfortable seat best value for money
seat that's it keep riding and we'll see
you soon
Weitere ähnliche Videos ansehen
I Tested ₹500 Wired Earphones - Must watch Before Buy !
Classroom Aid - Non-Euclidean Geometry
Top 5 Best Office Chair 2024 available on Amazon in Every Budget | Best Office Chair 2024 India
Rekomendasi HP TERBAIK buat LEBARAN 2024!
TESTED! The Best Sun Hoodies For Mountain Adventures
Bereden Politie: Fit en Gezond!
5.0 / 5 (0 votes)